Home > Ricoh > Projector > Ricoh Projector PJ S2240 User Manual

Ricoh Projector PJ S2240 User Manual

Here you can view all the pages of manual Ricoh Projector PJ S2240 User Manual. The Ricoh manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 71

69
[Power] button
Turn "On/Off" the power of the projectors or groups selected 
from the Projector (/Group) List.
[Input] button
Switches the input source of the projectors or groups selected 
from the Projector (/Group) List. 
Input source will not be changed if the projector doesn’t support 
the selected input source.
A Table of input source name in the projector and the projector 
management utility.
[PJ X5460][PJ WX5460]
The projectorThe projector Management Utility
Computer 1RGB 1
Computer...

Page 72

70
Problem: No image appears on screen
  Ensure all the cables and power connections are correctly and 
securely connected as described in the “Installation” section.
 Ensure the pins of terminals are not crooked or broken.
  Check if the projection lamp has been securely installed. Refer to 
the “Replacing the lamp” section section for more information.
  Make sure you have removed the lens cap and the projector is 
switched on.
  Ensure that the “AV Mute” feature is not turned on.
Problem:...

Page 73

71
Problem: The screen of the Notebook computer is not 
displaying a presentation
 If you are using a Notebook PC:
   Some Notebook PCs may deactivate their own screens when a 
second display device is in use. Each has a different way to be 
reactivated. Refer to your computer’s documentation for detailed 
information.
Problem: Image is unstable or flickering
  Adjust the “Phase” or “Clock” to correct it. Refer to the 
“H. Position” or “V. Position” section for more information.\
   Check and...

Page 74

72
Problem: Image is reversed
   Select “Screen > Projection Mode” from the OSD menu to adjust 
the image.
Problem: Lamp burns out or makes a popping sound
   When the lamp reaches its end of life, it will burn out and may 
make a loud popping sound. If this happens, the projector will 
not turn on until the lamp module has been replaced. To replace 
the lamp, follow the procedures in the “Replacing the Lamp”. 
English
Troubleshooting   

Page 75

73
MessagePOWER indicatorTEMP indicatorLAMP indicator
(Red/Blue)(Red)(Red)
Standby (Input power cord) (Red)
Normal (Power on) (Blue)
Powering up (Warming up)Flashing Blue 
(0.5 sec)
Power off (Cooling Down)Flashing Red
(0.5 sec)
Temperature Error (Over temperature On Event) (Blue)
Temperature Error (Over temperature On Standby) (Red)
Lamp Error (Lamp failed On Event) (Blue)
Lamp Error (Lamp failed On Standby) (Red)
Fan Error (Fan failed On Event) (Blue)Flashing
(0.5 sec)
Fan Error (Fan failed On Standby)...

Page 76

74
Problem: Message Reminders
  Temperature Error - the projector is overheat inside. Check the 
environmental condition.
 
Warning! TEMPERATURE TOO HIGHPlease:
1. Make sure air in and outlets are not blocked.
2. Make sure the environment temperature is under 40 degree C.
  Replacing the lamp - the lamp is about to reach its maximum 
lifetime. Prepare to replace it soon. 
 
Warning! Lamp
Lamp is approaching the end of its useful life.
Replacement Suggested!
 Fan Error - the cooling system fan is not...

Page 77

75
The projector will detect the lamp life itself. It will show you a 
warning message 
 
Warning! LampLamp is approaching the end of its useful life.
Replacement Suggested!
When you see this message, change the lamp as soon as possible. Make sure the projector has been cooled down for at least 60 minutes before changing the lamp. Warning: To avoid burns, allow the projector to cool for at least 60 minutes before you replace the lamp!
Warning: Do not drop the lamp module or touch the glass parts. The...

Page 78

76
List of Compatible Signals
A. VGA Analog
(1) VGA Analog - PC Signal
ModesResolutionV.Frequency(Hz)H.Frequency(kHz)
VGA
640 x 4806031.47
640 x 4807237.86
640 x 4807537.5
640 x 4808543.27
SVGA
800 x 6005635.2
800 x 6006037.88
800 x 6007248.08
800 x 6007546.88
800 x 6008553.67
XGA
1024 x 7686048.36
1024 x 7687056.48
1024 x 7687560.02
1024 x 7688568.67
SXGA
1152 x 8647063.8
1152 x 8647567.5
1152 x 8648577.1
1280 x 10246063.98
1280 x 10247277.9
1280 x 10247579.98
1280 x 10248591.15
Quad VGA1280 x 9606060...

Page 79

77
A. VGA Analog
(2) VGA Analog - Extended Wide Timing
ModesResolutionV.Frequency(Hz)H.Frequency(kHz)
WSVGA1024 x 6006037.3
WXGA
1280 x 7686047.78
1280 x 7687560.29
1280 x 7688568.63
1280 x 7206044.8
1280 x 8006049.6
1366 x 7686047.71
WXGA+1440 x 9006055.9
WSXGA1680 x 10506065.3
WUXGA1920 x 1080-RB6066.6
1920 x 1080-EIA6067.5
(3) VGA Analog - Component Signal
480i720 x 48059.94(29.97)27
480p720 x 48059.9431.47
576i720 x 57650(25)27
576p720 x 5765031.25
720p1280 x 7206045
720p1280 x 7205037.5
1080i1920 x...

Page 80

78
B. HDMI 
(1) HDMI - PC Signal
ModesResolutionV.Frequency(Hz)H.Frequency(kHz)
XGA
1024 x 7686048.36
1024 x 7687056.48
1024 x 7687560.02
1024 x 7688568.67
SXGA
1152 x 8647063.8
1152 x 8647567.5
1152 x 8648577.1
1280 x 10246063.98
1280 x 10247277.9
1280 x 10247579.98
1280 x 10248591.15
Quad VGA1280 x 9606060
1280 x 9607575
SXGA+1400 x 10506065.32
UXGA1600 x 12006075
PowerBook G4
640 x 4806031.5
640 x 48066.6 (67)35
800 x 6006037.88
1024 x 7686048.36
1152 x 8707568.68
1280 x 9607575.2
i Mac DV(G3)1024 x...
Start reading Ricoh Projector PJ S2240 User Manual

Related Manuals for Ricoh Projector PJ S2240 User Manual

All Ricoh manuals