Ricoh Projector PJ S2240 User Manual

39
Focus Ring
Adjusting the Projector Zoom and Focus
You may turn the zoom lever to zoom in or out. To focus the 
image, rotate the focus ring until the image is clear. 
 
RICOH PJ S2240/PJ TS100/PJ X2240/PJ X5460: Focus at 
distances from 3.94 to 39.4 feet (1.2 to 12.0 meters).
 
RICOH PJ WX2240/PJ WX5460: Focus at distances from 3.28 
to 36.1 feet (1.0 to 11.0 meters).
 
RICOH PJ HD5450: Focus at distances from 4.89 to 32.7 feet 
(1.5 to 10.0 meters).
Adjusting Projection Image Size
Zoom Lever
...

40
This table is for user’s reference only.
Diagonal length (inch) size of 4:3 Screen
Screen Size W x HProjection Distance (D)Offset (Hd)(m)(inch)(m)(feet)
WidthHeightWidthHeightwidetelewidetele(m)(feet)
300.60.524.018.01.21.33.94.30.070.23
400.80.632.024.01.61.85.25.70.090.30
601.20.948.036.02.42.67.88.60.140.45
701.41.156.042.02.83.19.110.00.160.52
801.61.264.048.03.23.510.411.50.180.60
901.81.472.054.03.63.911.712.90.210.67
1002.01.580.060.04.04.413.014.30.23 0.75...

41
This table is for user’s reference only.
Diagonal length (inch) size of 16:9 Screen
Screen Size W x HProjection Distance (D)Offset (Hd)(m)(inch)(m)(feet)
WidthHeightWidthHeightwidetelewidetele(m)(feet)
380.840.4733.118.6-1.5-5.00.080.25
451.000.5639.222.11.51.84.95.90.090.29
501.110.6243.624.51.72.05.46.50.100.33
601.330.7252.329.42.02.46.57.80.120.39
701.550.8761.034.32.32.87.69.20.140.46
801.771.0069.739.22.73.28.710.50.160.52
901.991.1278.444.13.03.69.811.80.180.59...

42
The Projector has a multilingual On Screen Display that 
allows you to make image adjustments and change a variety of 
settings.
How to operate
1.   To open the OSD, press “Menu” on the Control Panel or Remote 
Control.
2.  When OSD is displayed, use   keys to select any item in the 
main menu. While making a selection on a particular page, press  
or “Enter” key to enter sub menu.
3.  Use   keys to select the desired item in the sub menu and press 
 or “Enter” key to view further settings. Adjust the...

43
Picture
 Picture Mode
  There are many factory presets optimized for various types of 
images. Use the  or  key to select the item. 
  Bright: Mode for emphasizing brightness.
   Standard: Mode for optimizing the balance between brightness 
and color reproduction.
   Game: For game content.
  Natural: Mode for emphasizing color reproduction.
   User: User defined settings.
 Wall Color
  Use this function to obtain an optimized screen image according 
to the wall color. The available options:...

44
 Contrast
  The contrast controls the degree of difference between the lightest 
and darkest parts of the picture. Adjusting the contrast changes the 
amount of black and white in the image.
  Press  the  key to decrease the contrast.
  Press the  key to increase the contrast.
 Sharpness
 Adjust the sharpness of the image.
  Press the  key to decrease the sharpness.
  Press the  key to increase the sharpness.
 Saturation
  Adjust the color saturation of the image.
  Press the  key to decrease the...

45
	“H. Position” and “V. Position” functions 
are only supported under Computer Signal source.
Note
Screen
 Aspect Ratio
 Use this function to choose your desired aspect ratio.
   Auto: Automatically selects the appropriate display format. 
When input is 4:3, the image is displayed as 4:3. When input is 
16:9 above, the image is displayed as 16:9.
   4:3: Displays 4:3 aspect ratio.
   16:9: Displays 16:9 aspect ratio.
 Phase
  
Eliminate flicker from the image displayed. Use the  or  key to 
adjust...

46
 V. Position (Vertical Position)
 Shift the projected image position vertically.
  Press the  key to move the image down.
  Press the  key to move the image up.
 Digital Zoom
 Adjust the digital zoom ratio of the projected image.
  Press the  key to reduce the size of an image.
  Press the  key to magnify an image on the projection screen.
 V. Keystone
 Press the  or  key to adjust image distortion vertically. If the 
image looks trapezoidal, this option can help make the image 
rectangular....

47
Setting
 Language
 
Choose the multilingual OSD. Press “Enter” to open the sub menu 
and then use the  or  or  or  key to select your preferred 
language. Press “Enter” to finalize the selection. 
 Monitor Out (Standby)
  Enable/Disable the Monitor output function.
   On: Enable the Monitor Out function at projector standby status.
   Off: Disable the Monitor Out function at projector standby 
status.
 Network (Standby) 
  (RICOH PJ X5460 / PJ WX5460 / PJ HD5450 only)
  Enable/Disable the network...

48
 Network
(RICOH PJ X5460 / PJ WX5460 /PJ HD5450 only)
  Configure the network settings.
   Network State: Display the network connection status.
    DHCP:  Select On to allow the projector to obtain an IP address 
automatically from your network. Select Off to manually 
assign IP, Subnet Mask, Gateway and DNS configuration.
   IP Address: Set an IP address or display IP address provided 
from DHCP server when DHCP is set to On.
   Subnet Mask: Set subnet mask number or display subnet mask 
number...