Ricoh Projector PJ S2240 User Manual
Have a look at the manual Ricoh Projector PJ S2240 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 68
66
5. Double-click "setup.exe" stored in the "Projector Management
Utility" folder.
6. Install the application by following the on-screen instruction.
7. When the installation is complete, exit the installer.
A shortcut icon is created on the desktop.
Register projectors
1. Registers the projectors with Auto search
-Click [Register Projector] button.
-Click [Auto Search] button.
This software is to control and monitor projectors manufactured by our company. The software may not work...](http://img.usermanuals.tech/thumb/64/99948/w64_projector_manual_8787_d-67.png "Page 68
66
5. Double-click \"setup.exe\" stored in the \"Projector Management
Utility\" folder.
6. Install the application by following the on-screen instruction.
7. When the installation is complete, exit the installer.
A shortcut icon is created on the desktop.
Register projectors
1. Registers the projectors with Auto search
-Click [Register Projector] button.
-Click [Auto Search] button.
This software is to control and monitor projectors manufactured by our company. The software may not work...")
![Page 70
68
-Select the desired projector and click [Register] button.
Password authorization is required if password of the projector
is set to enable.
-Click [OK] button to return to the original screen.
2. Directly specifies the IP address and registers the projector.
-Enter IP address of the desired projector and click [Confirm]
button then the projector name will be displayed. After
confirming the projector name, click [Register] button.
Control the projector with the projector Management
Utility
Click...](http://img.usermanuals.tech/thumb/64/99948/w64_projector_manual_8787_d-69.png "Page 70
68
-Select the desired projector and click [Register] button.
Password authorization is required if password of the projector
is set to enable.
-Click [OK] button to return to the original screen.
2. Directly specifies the IP address and registers the projector.
-Enter IP address of the desired projector and click [Confirm]
button then the projector name will be displayed. After
confirming the projector name, click [Register] button.
Control the projector with the projector Management
Utility
Click...")
![Page 71
69
[Power] button
Turn "On/Off" the power of the projectors or groups selected
from the Projector (/Group) List.
[Input] button
Switches the input source of the projectors or groups selected
from the Projector (/Group) List.
Input source will not be changed if the projector doesn’t support
the selected input source.
A Table of input source name in the projector and the projector
management utility.
[PJ X5460][PJ WX5460]
The projectorThe projector Management Utility
Computer 1RGB 1
Computer...](http://img.usermanuals.tech/thumb/64/99948/w64_projector_manual_8787_d-70.png "Page 71
69
[Power] button
Turn \"On/Off\" the power of the projectors or groups selected
from the Projector (/Group) List.
[Input] button
Switches the input source of the projectors or groups selected
from the Projector (/Group) List.
Input source will not be changed if the projector doesn’t support
the selected input source.
A Table of input source name in the projector and the projector
management utility.
[PJ X5460][PJ WX5460]
The projectorThe projector Management Utility
Computer 1RGB 1
Computer...")
![Page 73
71
Problem: The screen of the Notebook computer is not
displaying a presentation
If you are using a Notebook PC:
Some Notebook PCs may deactivate their own screens when a
second display device is in use. Each has a different way to be
reactivated. Refer to your computer’s documentation for detailed
information.
Problem: Image is unstable or flickering
Adjust the “Phase” or “Clock” to correct it. Refer to the
“H. Position” or “V. Position” section for more information.\
Check and...](http://img.usermanuals.tech/thumb/64/99948/w64_projector_manual_8787_d-72.png "Page 73
71
Problem: The screen of the Notebook computer is not
displaying a presentation
If you are using a Notebook PC:
Some Notebook PCs may deactivate their own screens when a
second display device is in use. Each has a different way to be
reactivated. Refer to your computer’s documentation for detailed
information.
Problem: Image is unstable or flickering
Adjust the “Phase” or “Clock” to correct it. Refer to the
“H. Position” or “V. Position” section for more information.\
Check and...")
69 [Power] button Turn "On/Off" the power of the projectors or groups selected from the Projector (/Group) List. [Input] button Switches the input source of the projectors or groups selected from the Projector (/Group) List. Input source will not be changed if the projector doesn’t support the selected input source. A Table of input source name in the projector and the projector management utility. [PJ X5460][PJ WX5460] The projectorThe projector Management Utility Computer 1RGB 1 Computer 2RGB 2 VideoVideo 1 S-VideoVideo 2 HDMIDigital 1 [Mute] button Turn "On/Off " the muting of the projectors or groups selected from the Projector (/Group) List. The projector only supports Video & Audio mute. [Detail Information] button Show detail information of the selected projector. English English LAN Control English
70 Problem: No image appears on screen Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. Ensure the pins of terminals are not crooked or broken. Check if the projection lamp has been securely installed. Refer to the “Replacing the lamp” section section for more information. Make sure you have removed the lens cap and the projector is switched on. Ensure that the “AV Mute” feature is not turned on. Problem: Partial, scrolling or incorrectly displayed image Press “Auto Set” on the remote control. Adjust the computer display settings. Verify the resolution setting is less than or equal to 1600 x 1200 resolution. See your operating system’s Help file. If you are using a Notebook: 1. First, follow the steps above to adjust resolution of the computer. 2. Press the toggle output settings. For example: [Fn]+[F3] PANASONIC, NEC => Fn+F3 HP, SHARP, TOSHIBA => Fn+F5 IBM, SONY => Fn+F7 DELL, EPSON => Fn+F8 FUJITSU => Fn+F10 APPLE =>F7 If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector. If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local dealer or service center. English Troubleshooting
71 Problem: The screen of the Notebook computer is not displaying a presentation If you are using a Notebook PC: Some Notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer’s documentation for detailed information. Problem: Image is unstable or flickering Adjust the “Phase” or “Clock” to correct it. Refer to the “H. Position” or “V. Position” section for more information.\ Check and reconfigure the display mode of your graphic card to make it compatible with the product. Problem: Image is out of focus Adjust the Focus Ring on the projector lens. Make sure the projection screen is between the required distance. (refer to pages 39~41) Problem: The image is stretched when displaying 16:9 DVD Change the aspect ratio by pressing the “Aspect” button on the remote control or select “Screen > Aspect Ratio” from the OSD menu\ to show image with proper aspect ratio. Problem: Image is too small or too large Adjust the Zoom lever on the top of the projector. Move the projector closer to or further from the screen. Press the “Aspect” button on the remote control or press the “Menu” button on the projector panel, go to “Screen > Aspect Ratio” and try the different settings. English English Troubleshooting English
72 Problem: Image is reversed Select “Screen > Projection Mode” from the OSD menu to adjust the image. Problem: Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Replacing the Lamp”. English Troubleshooting
73 MessagePOWER indicatorTEMP indicatorLAMP indicator (Red/Blue)(Red)(Red) Standby (Input power cord) (Red) Normal (Power on) (Blue) Powering up (Warming up)Flashing Blue (0.5 sec) Power off (Cooling Down)Flashing Red (0.5 sec) Temperature Error (Over temperature On Event) (Blue) Temperature Error (Over temperature On Standby) (Red) Lamp Error (Lamp failed On Event) (Blue) Lamp Error (Lamp failed On Standby) (Red) Fan Error (Fan failed On Event) (Blue)Flashing (0.5 sec) Fan Error (Fan failed On Standby) (Red)Flashing (0.5 sec) Error (Color Wheel fail / Striking Lamp Fail On Event) (Blue)Flashing (0.5 sec) Error (Color Wheel fail / Striking Lamp Fail On Standby) (Red)Flashing (0.5 sec) Problem: Indicator lighting message Steady light => No light => Note English English Troubleshooting English
74 Problem: Message Reminders Temperature Error - the projector is overheat inside. Check the environmental condition. Warning! TEMPERATURE TOO HIGHPlease: 1. Make sure air in and outlets are not blocked. 2. Make sure the environment temperature is under 40 degree C. Replacing the lamp - the lamp is about to reach its maximum lifetime. Prepare to replace it soon. Warning! Lamp Lamp is approaching the end of its useful life. Replacement Suggested! Fan Error - the cooling system fan is not working. Warning! FAN LOCKED The projector will switch off automatically. Replacing the filter - the filter is about to reach its maximum usage time. Clean or replace the filter soon. Warning! Dust FiltersThe Usage time of the dust filter is reached. Please clean the dust filters for better performance. English Troubleshooting
75 The projector will detect the lamp life itself. It will show you a warning message Warning! LampLamp is approaching the end of its useful life. Replacement Suggested! When you see this message, change the lamp as soon as possible. Make sure the projector has been cooled down for at least 60 minutes before changing the lamp. Warning: To avoid burns, allow the projector to cool for at least 60 minutes before you replace the lamp! Warning: Do not drop the lamp module or touch the glass parts. The glass parts may shatter and cause injury if it is dropped. Warning: For continued safety replace with PJ Replacement Lamp Type 14 for PJ WX2240/X2240/S2240. Warning: For continued safety replace with PJ Replacement Lamp Type 16 for PJ WX5460/X5460/HD5450. Caution: If the lamp should break, handle with care to avoid injury due to broken pieces and contact your sales representative for repair service. Lamp Replacing Procedure: 1. Switch off the power to the projector by pressing the “” button. 2. Allow the projector to cool down at least 60 minutes. 3. Disconnect the power cord. 4. Remove the screw on the lamp cover. 5. Slide the lamp cover to the side and remove the cover. 6. Pull out the lamp connector. 7. Lift up the lamp handle. 8. Carefully remove the lamp module. y 9. Install the new lamp module by reversing the previous steps. See the lamp’s manual for instructions on resetting the lamp time. 1 2 5 4 3 Used LampsThis projector’s lamp contains trace amounts of environmentally harmful inorganic mercury. Be careful not to break used lamps, and dispose of them in accordance with local regulations or contact your sales representative. English English Replacing the lamp English
76 List of Compatible Signals A. VGA Analog (1) VGA Analog - PC Signal ModesResolutionV.Frequency(Hz)H.Frequency(kHz) VGA 640 x 4806031.47 640 x 4807237.86 640 x 4807537.5 640 x 4808543.27 SVGA 800 x 6005635.2 800 x 6006037.88 800 x 6007248.08 800 x 6007546.88 800 x 6008553.67 XGA 1024 x 7686048.36 1024 x 7687056.48 1024 x 7687560.02 1024 x 7688568.67 SXGA 1152 x 8647063.8 1152 x 8647567.5 1152 x 8648577.1 1280 x 10246063.98 1280 x 10247277.9 1280 x 10247579.98 1280 x 10248591.15 Quad VGA1280 x 9606060 1280 x 9607575 SXGA+1400 x 10506065.32 UXGA1600 x 12006075 PowerBook G4 640 x 4806031.5 640 x 48066.6(67)35 800 x 6006037.88 1024 x 7686048.36 1152 x 8707568.68 1280 x 9607575.2 i Mac DV(G3)1024 x 7687560.3 English Appendices
77 A. VGA Analog (2) VGA Analog - Extended Wide Timing ModesResolutionV.Frequency(Hz)H.Frequency(kHz) WSVGA1024 x 6006037.3 WXGA 1280 x 7686047.78 1280 x 7687560.29 1280 x 7688568.63 1280 x 7206044.8 1280 x 8006049.6 1366 x 7686047.71 WXGA+1440 x 9006055.9 WSXGA1680 x 10506065.3 WUXGA1920 x 1080-RB6066.6 1920 x 1080-EIA6067.5 (3) VGA Analog - Component Signal 480i720 x 48059.94(29.97)27 480p720 x 48059.9431.47 576i720 x 57650(25)27 576p720 x 5765031.25 720p1280 x 7206045 720p1280 x 7205037.5 1080i1920 x 108060(30)33.75 1080i1920 x 108050(25)33.75 1080p1920 x 10806067.5 1080p1920 x 10805056.25 B. HDMI (1) HDMI - PC Signal ModesResolutionV.Frequency(Hz)H.Frequency(kHz) VGA 640 x 4806031.47 640 x 4807237.86 640 x 4807537.5 640 x 4808543.27 SVGA 800 x 6005635.2 800 x 6006037.88 800 x 6007248.08 800 x 6007546.88 800 x 6008553.67 (*1) is not available on RICOH PJ TS100. Note English English Appendices English
78 B. HDMI (1) HDMI - PC Signal ModesResolutionV.Frequency(Hz)H.Frequency(kHz) XGA 1024 x 7686048.36 1024 x 7687056.48 1024 x 7687560.02 1024 x 7688568.67 SXGA 1152 x 8647063.8 1152 x 8647567.5 1152 x 8648577.1 1280 x 10246063.98 1280 x 10247277.9 1280 x 10247579.98 1280 x 10248591.15 Quad VGA1280 x 9606060 1280 x 9607575 SXGA+1400 x 10506065.32 UXGA1600 x 12006075 PowerBook G4 640 x 4806031.5 640 x 48066.6 (67)35 800 x 6006037.88 1024 x 7686048.36 1152 x 8707568.68 1280 x 9607575.2 i Mac DV(G3)1024 x 7687560.3 (2) HDMI - Extended Wide Timing WSVGA1024 x 6006037.3 WXGA 1280 x 7686047.78 1280 x 7687560.29 1280 x 7688568.63 1280 x 7206044.8 1280 x 8006049.6 1366 x 7686047.71 WXGA+1440 x 9006055.9 WSXGA1680 x 10506065.3 WUXGA 1920 x 1080-RB6066.6 1920 x 1080-EIA6067.5 1920 x 1200-RB59.9574.04 (*1) is not available on RICOH PJ TS100. Note English Appendices