Ricoh Mp C4500 Instruction Manual

Tray Paper Settings
51
2 Tray Paper Settings
This section describes the user tools in the Tray Paper Settings menu under Sys-
tem Settings.
Default settings are shown in bold type.
Important
❒If the specified paper size differs from the actual size of the paper loaded in
the paper tray, a misfeed might occur because the correct paper size was not
detected.
❖Paper Tray Priority: Copier (copier/Document Server)
Specify the tray to supply paper for output.
Tray 1
Tray 2
Tray 3 (optional)
Tray 4...

System Settings
52
2
❖Tray Paper Size: Tray 2-4
Select the size of the paper loaded in the paper tray.
The paper guide for the optional LCT is fixed for A4K, 81/2×11K size pa-
per. Contact your service representative if you need to change the paper size.
❖The paper sizes you can set for tray 2 are as follows:
Metric version:
Auto Detect, A3L, A4K, A4L, A5K, B4JISL, B5JISK,
B5JISL, 11×17L, 11×15L, 10×14L, 8
1/2×14L, 81/2×13L,
81/2×11K, 81/2×11L, 81/4×14L, 81/4×13L, 8×13L, 8×10L,
71/4×101/2K, 71/4×101/2L,...

Tray Paper Settings
53
2
❖Printer Bypass Paper Size
Specify the size of the paper in the bypass tray when printing data from the
computer.
❖The paper sizes you can set for bypass tray are as follows:
Metric version
Auto Detect, A3L, A4K, A4L, A5K, A5L, A6L,
B4JISL, B5JISK, B5JISL, B6JISL, C5 EnvK, C6 EnvK, 
DL EnvK, 12×18L, 11×17L, 8
1/2×14L, 81/2×13L,
81/2×11K, 81/2×11L, 81/4×13L, 8×13L, 71/4×101/2K,
71/4×101/2L, 51/2×81/2L, 41/8×91/2K, 37/8×71/2K, 8KL,
16KK, 16KL
Specify a custom size of between...

System Settings
54
2
Paper Thickness
 Thin Paper
Plain Paper (60-81g/m
2, 16-22lb.)
 Middle Thick (82-105g/m
2, 22-28lb.)
 Thick Paper 1 (106-169g/m
2, 28.5-44.9lb.)
 Thick Paper 2 (170-219g/m
2, 45-58lb.)
 Thick Paper 3 (220-253g/m
2, 58.5-67lb.)
❖Paper Type: Tray 1-4
Sets the display so you can see what type of paper is loaded in each paper
tray. The print function uses this information to automatically select the pa-
per tray.
Paper Type
No Display
Recycled Paper
 Colour Paper
 Letterhead...

Tray Paper Settings
55
2
❖Cover Sheet Tray
Allows you to specify and display the paper tray that is setting cover sheets.
After selecting the paper tray, you can also specify the display timing and
copy method for two-sided copying.
Tray to Program
Off
 Bypass Tray
Tray 1
Tray 2
 Tray 3 (optional)
 Tray 4 (optional)
 Copying Method in Duplex
 2 Sided Copy
 1 Sided Copy
Display Time
 At Mode Selected
 Full Time
❖Slip Sheet Tray
Allows you to specify and display the paper tray that is...

System Settings
56
2
Note
❒When paper of the same type and size is loaded in two different paper trays
and you want to specify tray for 2 Sided Copy and tray for 1 Sided Copy,
specify the upper tray for 2 Sided Copy. If one of the trays is specified as the
default in Paper Tray Priority, assign 2 Sided Copy to that tray.
❒A   mark appears next to the paper tray if [Off] is selected in [Auto Paper Se-
lect].
❒[Auto Paper Select] can only be selected for the copier function if [No Display]
and [Recycled...

Timer Settings
57
2 Timer Settings
This section describes the user tools in the Timer Settings menu under System
Settings.
Default settings are shown in bold type.
❖Auto Off Timer
After a specified period has passed, following job completion, the machine
automatically turns off, in order to conserve energy. This function is called
Auto Off. The machine status after the Auto Off operation is referred to as
Off mode, or Sleep mode. For the Auto Off Timer, specify the time to
elapse before Auto Off.
The...

System Settings
58
2
❖Facsimile Auto Reset Timer (facsimile)
Specifies the time to elapse before the facsimile mode resets.
The time can be set from 30 to 999 seconds, using the number keys.
The default setting is 30 second(s).
❖Printer Auto Reset Timer (printer)
Specifies the time to elapse before the printer function resets.
On
Off
The time can be set from 10 to 999 seconds, using the number keys.
The default setting is 60 second(s).
❖Scanner Auto Reset Timer (scanner)
Specifies the time to elapse...

Interface Settings
59
2 Interface Settings
This section describes the user tools in the Interface Settings menu under System
Settings.
Default settings are shown in bold type.
Network
This section describes the user tools in the Network menu under Interface Set-
tings.
❖Machine IPv4 Address
Before using this machine in the network environment, you must specify the
IPv4 address and subnet mask.
When you select [Specify], enter the IPv4 address and subnet mask as
xxx.xxx.xxx.xxx (x indicates a number).
If...

System Settings
60
2
❖IPv6 Gateway Address
Displays the machine’s IPv6 gateway address.
❖IPv6 Stateless Address Autoconfiguration
Specify IPv6 Stateless Address Autoconfiguration.
Active
Inactive
❖DNS Configuration
Make settings for the DNS server.
When you select [Specify], enter the DNS Server IPv4 address as
xxx.xxx.xxx.xxx(x indicates a number).
Auto-Obtain (DHCP)
Specify
DNS Server 1: 000.000.000.000
DNS Server 2: 000.000.000.000
DNS Server 3: 000.000.000.000
❖DDNS Configuration
Specify the...