Ricoh Mp C2003 User Guide

MessagesCausesSolutions"Unable to access the
specified memory storage
device."• An error occurred when the machine
accessed the memory
storage device or a file
stored on the memory
storage device.
• An error occurred when the user used the
Direct printing function to print from a memory
storage device.Save the file to a different memory storage device, and then try to print
again.
Messages Printed on the Error Logs or Reports When Using the Printer Function
This section describes likely causes of...

MessagesCausesSolutions"An error occurred while
processing an Unauthorized
Copy Prevention job. The
job was cancelled."The resolution is set to a
value less than 600 dpi
when [Unauthorized Copy
Prevention] is specified.On the printer driver, set the resolution
to 600 dpi or higher, or deselect
[Unauthorized Copy Prevention]."Collate has been
cancelled."Collate was canceled.Turn off the power, and then back on
again. If the message appears again,
contact your service...

MessagesCausesSolutions"Classification Code is
incorrect."The classification code is not
supported with the printer
driver.Select [Optional] for classification
code. For details about how to specify
classification code settings, see
"Configuring Classification Codes",
Print."Duplex has been
cancelled."Duplex printing was
canceled.• Select an appropriate paper size for the duplex function. For details
about paper, see "Specifications
for the Main Unit", Maintenance
and...

MessagesCausesSolutions"Punch has been cancelled."Punch printing was
canceled.Check the paper orientation, print
orientation, and then punch position.
Certain settings can produce print
results that might not be as expected."Staple has been cancelled."Stapling printing was
canceled.Check the paper orientation, paper
quantity, print orientation, and staple
position. Certain settings can produce
print results that might not be as
expected.
When documents cannot be stored in the Document...

MessagesCausesSolutions"Exceeded max. number of
files. (Auto)"While using the error job
store function to store
Normal Print jobs as Hold
Print files, the maximum file
capacity for file storage or
Hold Print file management
(automatic) was exceeded.Delete Hold Print files (automatic) or
unneeded files stored in the machine."Exceeded max. number of
pages of Document Server.
Cannot store."The maximum page
capacity of the Document
Server was exceeded.Delete some of the files stored in the...

When there is not enough free hard disk spaceMessagesCausesSolutions"HDD is full."When printing with the
PostScript 3 printer driver,
the hard disk capacity for
fonts and forms has been
exceeded.Delete unneeded forms or fonts
registered in the machine."HDD is full."The hard disk became full
while printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file.Delete unneeded files stored in the
machine.
Alternatively, reduce the data size of
the Sample Print, Locked Print, Hold...

When the user lacks privileges to perform an operationMessagesCausesSolutions"No response from the
server. Authentication has
failed."A timeout occurred while
connecting to the server for
LDAP authentication or
Windows Authentication.Check the status of the server."Printing privileges have not
been set for this document."The PDF document you have
tried to print has no
privileges to print.Contact the owner of the document."You do not have a privilege
to use this function. This job
has...

MessagesCausesSolutions"Information for user
authentication is already
registered for another user."The user name for LDAP or
Integration Server
authentication was already
registered in a different
server with a different ID,
and a duplication of the user
name occurred due to a
switching of domains
(servers), etc..For details about user authentication,
see Security Guide.
When other errors occur
MessagesCausesSolutions"85: Error"The specified graphics
library is unavailable.Check that the...

MessagesCausesSolutions"Compressed Data Error."The printer detected corrupt
compressed data.• Check the connection between the computer and the printer.
• Check that the program you used to compress the data is
functioning correctly."Data storage error."You tried to print a Sample
Print, Locked Print, Hold
Print, or Stored Print file, or
to store a file in the
Document Server when the
hard disk was
malfunctioning.Contact your service representative."Error has occurred."A syntax...

MessagesCausesSolutions"I/O buffer overflow."An input buffer overflow
occurred.• In [Printer Features], under [Host Interface], select [I/O Buffer],
and then set the maximum buffer
size to a larger value.
• Reduce the number of files being sent to the machine."Insufficient Memory"A memory allocation error
occurred.PCL 6
On the printer driver's [Detailed
Settings] tab, click [Print Quality]
in "Menu:", and then select
[Raster] in the "Vector/Raster:"
list. In some...