Ricoh Caplio R30 User Guide
Here you can view all the pages of manual Ricoh Caplio R30 User Guide. The Ricoh manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 131
![Page 131
129
Changing Camera Settings
To transfer images in Mass Storage Mode, follow the
steps below:
1.Change [USB CONNECTION] to [MASS STR] on the Setup
menu.
2.Make sure that the camera power is off.
3.Connect the accessory USB cable to a USB port of your
computer.
4.Connect the USB cable to the USB
terminal of the camera.
The camera power becomes on.
Your computer automatically reads a file
necessary for recognizing the camera as a
drive.
After this preparation, the camera is
displayed as a drive at...](http://img.usermanuals.tech/thumb/64/49821/w300_ricoh_caplio_r30-user-guide-130.png "Page 131
129
Changing Camera Settings
To transfer images in Mass Storage Mode, follow the
steps below:
1.Change [USB CONNECTION] to [MASS STR] on the Setup
menu.
2.Make sure that the camera power is off.
3.Connect the accessory USB cable to a USB port of your
computer.
4.Connect the USB cable to the USB
terminal of the camera.
The camera power becomes on.
Your computer automatically reads a file
necessary for recognizing the camera as a
drive.
After this preparation, the camera is
displayed as a drive at...")
129 Changing Camera Settings To transfer images in Mass Storage Mode, follow the steps below: 1.Change [USB CONNECTION] to [MASS STR] on the Setup menu. 2.Make sure that the camera power is off. 3.Connect the accessory USB cable to a USB port of your computer. 4.Connect the USB cable to the USB terminal of the camera. The camera power becomes on. Your computer automatically reads a file necessary for recognizing the camera as a drive. After this preparation, the camera is displayed as a drive at...
Page 132
![Page 132
130
Disconnecting the Camera from Your Computer
(Windows)
This display is an example for Windows XP. The terms are different
for other OS but the operations are the same.
1.Click the Safely Remove Hardware
icon at the right end of the task bar.
2.Select [USB Large-capacity Storage
Device] and click [Stop].
3.Check that [USB Large-capacity Storage Device] is selected
and click [OK].
4.Click [OK].
5.Unplug the USB cable.
Disconnect the Camera from Your Computer
(Macintosh)
1.Put the displayed drive...](http://img.usermanuals.tech/thumb/64/49821/w300_ricoh_caplio_r30-user-guide-131.png "Page 132
130
Disconnecting the Camera from Your Computer
(Windows)
This display is an example for Windows XP. The terms are different
for other OS but the operations are the same.
1.Click the Safely Remove Hardware
icon at the right end of the task bar.
2.Select [USB Large-capacity Storage
Device] and click [Stop].
3.Check that [USB Large-capacity Storage Device] is selected
and click [OK].
4.Click [OK].
5.Unplug the USB cable.
Disconnect the Camera from Your Computer
(Macintosh)
1.Put the displayed drive...")
130 Disconnecting the Camera from Your Computer (Windows) This display is an example for Windows XP. The terms are different for other OS but the operations are the same. 1.Click the Safely Remove Hardware icon at the right end of the task bar. 2.Select [USB Large-capacity Storage Device] and click [Stop]. 3.Check that [USB Large-capacity Storage Device] is selected and click [OK]. 4.Click [OK]. 5.Unplug the USB cable. Disconnect the Camera from Your Computer (Macintosh) 1.Put the displayed drive...
Page 133
131 Changing Camera Settings Enlarging Icon Display (ENLGE PHOTO ICON) Icons on the shooting screen are enlarged. Under this setting, the following icons are enlarged: •Flash • Macro Shooting •Self Timer • White Balance • Focus • Exposure Compensation • ISO Sensitivity If icons are enlarged, the following items are not displayed: • Zoom Bar/Focus Bar • Date/Time • Sharpness • Color Depth To enlarge icons on the shooting screen, follow the steps below: 1.Display the setup menu. For the operating...
Page 134
132 Downloaded From camera-usermanual.com Ricoh Manuals
Page 135
Chapter 4 Installing Software (Downloading Images to Your Computer) Installing the Provided Software (For Windows) ...134 Installing the Provided Software (For Macintosh) ...................................................... 153 Downloaded From camera-usermanual.com Ricoh Manuals
Page 136
![Page 136
134
Installing the Provided Software (For Windows)
You need to install software for transferring images to your computer
before you can download images from the camera.
Note
• If a file with the same name already exists at the destination, it is overwritten. If you do not
want the file to be overwritten, rename the file or transfer images to another folder.
• To download images from the camera to your computer without having to install the
software, change [USB CONNECTION] to [MASS STR] on the camera...](http://img.usermanuals.tech/thumb/64/49821/w300_ricoh_caplio_r30-user-guide-135.png "Page 136
134
Installing the Provided Software (For Windows)
You need to install software for transferring images to your computer
before you can download images from the camera.
Note
• If a file with the same name already exists at the destination, it is overwritten. If you do not
want the file to be overwritten, rename the file or transfer images to another folder.
• To download images from the camera to your computer without having to install the
software, change [USB CONNECTION] to [MASS STR] on the camera...")
134 Installing the Provided Software (For Windows) You need to install software for transferring images to your computer before you can download images from the camera. Note • If a file with the same name already exists at the destination, it is overwritten. If you do not want the file to be overwritten, rename the file or transfer images to another folder. • To download images from the camera to your computer without having to install the software, change [USB CONNECTION] to [MASS STR] on the camera...
Page 137
![Page 137
135
Installing Software
Software that can be installed from the Caplio Software
CD-ROM
Once you insert the Caplio Software
CD-ROM in the CD-ROM drive, the
following screen appears
automatically:
When [Install Software] is clicked: (P.139)
The following software will be installed:
XP: Windows XP 98: Windows 98/98SE/Me/2000
Item NameDescription(Refer to)
Install the Software Use this button to install software required for handling the
camera and images.P. 1 3 9
Installing DeskTopBinder Lite P.141...](http://img.usermanuals.tech/thumb/64/49821/w300_ricoh_caplio_r30-user-guide-136.png "Page 137
135
Installing Software
Software that can be installed from the Caplio Software
CD-ROM
Once you insert the Caplio Software
CD-ROM in the CD-ROM drive, the
following screen appears
automatically:
When [Install Software] is clicked: (P.139)
The following software will be installed:
XP: Windows XP 98: Windows 98/98SE/Me/2000
Item NameDescription(Refer to)
Install the Software Use this button to install software required for handling the
camera and images.P. 1 3 9
Installing DeskTopBinder Lite P.141...")
135 Installing Software Software that can be installed from the Caplio Software CD-ROM Once you insert the Caplio Software CD-ROM in the CD-ROM drive, the following screen appears automatically: When [Install Software] is clicked: (P.139) The following software will be installed: XP: Windows XP 98: Windows 98/98SE/Me/2000 Item NameDescription(Refer to) Install the Software Use this button to install software required for handling the camera and images.P. 1 3 9 Installing DeskTopBinder Lite P.141...
Page 138
![Page 138
136
Reference
The camera is provided with software ImageMixer that allows you to display and edit images
from your computer. For how to use ImageMixer, click the [?] button on the ImageMixer
window and see the displayed manual.
For the latest information about the ImageMixer, access the Web page of Pixela Co., Ltd.
(http://www.imagemixer.com).
Note
The WinASPI installer starts during installation of ImageMixer.
WinASPI is required when creating a Video CD using ImageMixer.
When [Installing...](http://img.usermanuals.tech/thumb/64/49821/w300_ricoh_caplio_r30-user-guide-137.png "Page 138
136
Reference
The camera is provided with software ImageMixer that allows you to display and edit images
from your computer. For how to use ImageMixer, click the [?] button on the ImageMixer
window and see the displayed manual.
For the latest information about the ImageMixer, access the Web page of Pixela Co., Ltd.
(http://www.imagemixer.com).
Note
The WinASPI installer starts during installation of ImageMixer.
WinASPI is required when creating a Video CD using ImageMixer.
When [Installing...")
136 Reference The camera is provided with software ImageMixer that allows you to display and edit images from your computer. For how to use ImageMixer, click the [?] button on the ImageMixer window and see the displayed manual. For the latest information about the ImageMixer, access the Web page of Pixela Co., Ltd. (http://www.imagemixer.com). Note The WinASPI installer starts during installation of ImageMixer. WinASPI is required when creating a Video CD using ImageMixer. When [Installing...
Page 139
![Page 139
137
Installing Software
When [Browse User’s Manual (Software Version)] is clicked:
The Software User Guide (PDF file) on the Caplio Software CD-ROM can be
displayed on your computer screen. If you are a Windows user and have
Acrobat Reader installed on your computer, simply double-click [View
Software User Guide].
If not installed, Acrobat Reader should be installed (see P.149).
When [Browse CD-ROM] is clicked:
You can check folders and files on the CD-ROM.
The CD-ROM contains not only the Caplio...](http://img.usermanuals.tech/thumb/64/49821/w300_ricoh_caplio_r30-user-guide-138.png "Page 139
137
Installing Software
When [Browse User’s Manual (Software Version)] is clicked:
The Software User Guide (PDF file) on the Caplio Software CD-ROM can be
displayed on your computer screen. If you are a Windows user and have
Acrobat Reader installed on your computer, simply double-click [View
Software User Guide].
If not installed, Acrobat Reader should be installed (see P.149).
When [Browse CD-ROM] is clicked:
You can check folders and files on the CD-ROM.
The CD-ROM contains not only the Caplio...")
137 Installing Software When [Browse User’s Manual (Software Version)] is clicked: The Software User Guide (PDF file) on the Caplio Software CD-ROM can be displayed on your computer screen. If you are a Windows user and have Acrobat Reader installed on your computer, simply double-click [View Software User Guide]. If not installed, Acrobat Reader should be installed (see P.149). When [Browse CD-ROM] is clicked: You can check folders and files on the CD-ROM. The CD-ROM contains not only the Caplio...
Page 140
138 System Requirements for Using the Provided Software The following environments are necessary for using the provided software. Please check your computer, or the computer’s user manual. Caution • If your computer has an upgraded OS, the USB function may not work normally, so it cannot be supported. • The provided software may not operate properly if changes are made to the operating system, such as with patches and service package releases. • The camera does not support connection to a USB port...