Ricoh Caplio R30 User Guide
Here you can view all the pages of manual Ricoh Caplio R30 User Guide. The Ricoh manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 121
![Page 121
119
Changing Camera Settings
Changing Image Confirmation Time
(LCD CONFIRM.)
Immediately after pressing the shutter button, the still image taken is
displayed for a moment so you can check it.
At purchase, Confirmation Time is set to 0.5 seconds, but this can
be changed.
To change Confirmation Time, follow the steps below.
1.Display the setup menu.
For detailed operation, see P.111.
2.Press the button to select [LCD
CONFIRM.] and press the $
button.
3.Press the ! buttons to select
the desired...](http://img.usermanuals.tech/thumb/64/49821/w300_ricoh_caplio_r30-user-guide-120.png "Page 121
119
Changing Camera Settings
Changing Image Confirmation Time
(LCD CONFIRM.)
Immediately after pressing the shutter button, the still image taken is
displayed for a moment so you can check it.
At purchase, Confirmation Time is set to 0.5 seconds, but this can
be changed.
To change Confirmation Time, follow the steps below.
1.Display the setup menu.
For detailed operation, see P.111.
2.Press the button to select [LCD
CONFIRM.] and press the $
button.
3.Press the ! buttons to select
the desired...")
119 Changing Camera Settings Changing Image Confirmation Time (LCD CONFIRM.) Immediately after pressing the shutter button, the still image taken is displayed for a moment so you can check it. At purchase, Confirmation Time is set to 0.5 seconds, but this can be changed. To change Confirmation Time, follow the steps below. 1.Display the setup menu. For detailed operation, see P.111. 2.Press the button to select [LCD CONFIRM.] and press the $ button. 3.Press the ! buttons to select the desired...
Page 122
120 Changing File Name Settings (SEQUENTIAL NO.) When you shoot a still image, it is stored on an SD Memory Card or in internal memory, with a consecutively numbered file name automatically assigned. When you are switching SD Memory Cards, you can set your camera to continue consecutive numbering from the previously loaded SD Memory Card. To make changes to file numbering, follow the steps below. 1.Display the setup menu. For detailed operation, see P.111. 2.Press the button to select [SEQUENTIAL...
Page 123
![Page 123
121
Changing Camera Settings
Note
• When you are recording to internal memory, file names are assigned just as when
[SEQUENTIAL NO.] is set to [OFF].
• When transferring images to a computer using RICOH Gate La (P.143), if a file with the
same name already exists in the destination folder of the computer, the file being
transferred is renamed and saved to prevent overwriting the existing file.
• When an image has been transferred to a computer using a mass storage device (P.146), it
is saved as a...](http://img.usermanuals.tech/thumb/64/49821/w300_ricoh_caplio_r30-user-guide-122.png "Page 123
121
Changing Camera Settings
Note
• When you are recording to internal memory, file names are assigned just as when
[SEQUENTIAL NO.] is set to [OFF].
• When transferring images to a computer using RICOH Gate La (P.143), if a file with the
same name already exists in the destination folder of the computer, the file being
transferred is renamed and saved to prevent overwriting the existing file.
• When an image has been transferred to a computer using a mass storage device (P.146), it
is saved as a...")
121 Changing Camera Settings Note • When you are recording to internal memory, file names are assigned just as when [SEQUENTIAL NO.] is set to [OFF]. • When transferring images to a computer using RICOH Gate La (P.143), if a file with the same name already exists in the destination folder of the computer, the file being transferred is renamed and saved to prevent overwriting the existing file. • When an image has been transferred to a computer using a mass storage device (P.146), it is saved as a...
Page 124
![Page 124
122
Setting the Date and Time
(DATE SETTINGS)
You can take still images with the time or date stamped onto the
picture.
The date/time setting on the SETUP menu is explained here.
1.Display the setup menu.
For detailed operation, see P.111.
2.Press the button to select
[DATE SETTINGS] and press the $
button.
3.Press !#$ to set the year,
month, date and time.
If you hold down the ! or button, you
can increase/decrease the value quickly.
4.In [FORMAT], choose the date and
time format.
5.Check the...](http://img.usermanuals.tech/thumb/64/49821/w300_ricoh_caplio_r30-user-guide-123.png "Page 124
122
Setting the Date and Time
(DATE SETTINGS)
You can take still images with the time or date stamped onto the
picture.
The date/time setting on the SETUP menu is explained here.
1.Display the setup menu.
For detailed operation, see P.111.
2.Press the button to select
[DATE SETTINGS] and press the $
button.
3.Press !#$ to set the year,
month, date and time.
If you hold down the ! or button, you
can increase/decrease the value quickly.
4.In [FORMAT], choose the date and
time format.
5.Check the...")
122 Setting the Date and Time (DATE SETTINGS) You can take still images with the time or date stamped onto the picture. The date/time setting on the SETUP menu is explained here. 1.Display the setup menu. For detailed operation, see P.111. 2.Press the button to select [DATE SETTINGS] and press the $ button. 3.Press !#$ to set the year, month, date and time. If you hold down the ! or button, you can increase/decrease the value quickly. 4.In [FORMAT], choose the date and time format. 5.Check the...
Page 125
![Page 125
123
Changing Camera Settings
Changing the Display Language
(LANGUAGE/ )
You can change the language displayed on the LCD Monitor.
To change the display language, follow the steps below.
1.Display the setup menu.
For detailed operation, see P.111.
2.Press the button to select
[LANGUAGE/ ] and press the
$ button.
The language selection screen appears.
3.Press the !#$ buttons to select
the desired setting.
4.Press the M/O button.
This setting will be used until you
change it.
Possible Settings...](http://img.usermanuals.tech/thumb/64/49821/w300_ricoh_caplio_r30-user-guide-124.png "Page 125
123
Changing Camera Settings
Changing the Display Language
(LANGUAGE/ )
You can change the language displayed on the LCD Monitor.
To change the display language, follow the steps below.
1.Display the setup menu.
For detailed operation, see P.111.
2.Press the button to select
[LANGUAGE/ ] and press the
$ button.
The language selection screen appears.
3.Press the !#$ buttons to select
the desired setting.
4.Press the M/O button.
This setting will be used until you
change it.
Possible Settings...")
123 Changing Camera Settings Changing the Display Language (LANGUAGE/ ) You can change the language displayed on the LCD Monitor. To change the display language, follow the steps below. 1.Display the setup menu. For detailed operation, see P.111. 2.Press the button to select [LANGUAGE/ ] and press the $ button. The language selection screen appears. 3.Press the !#$ buttons to select the desired setting. 4.Press the M/O button. This setting will be used until you change it. Possible Settings...
Page 126
124 Changing the Playback Method for Viewing on TV (VIDEO OUT MODE) You can view your still images and movies on a television screen by connecting your camera to a television with the AV cable that came with your camera. Your camera is set to NTSC video format (used in Japan and other countries) for use with television equipment, etc. If the equipment you want to connect to uses PAL format (used in Europe and elsewhere), then switch your camera to PAL format before connecting. To change the...
Page 127
![Page 127
125
Changing Camera Settings
Changing the Setting of Step Zooming
(STEP ZOOM)
The focal length with optical zooming can be fixed to any of seven
levels (28, 35, 50, 85, 105, 135, and 160 mm as converted
equivalent to 35 mm cameras) (Step Zoom).
To set whether to use step zooming (ON) or not (OFF), follow the
steps below.
1.Display the setup menu.
For detailed operation, see P.111.
2.Press the button to select [STEP
ZOOM] and press the $ button.
3.Press the ! buttons to select
the desired setting....](http://img.usermanuals.tech/thumb/64/49821/w300_ricoh_caplio_r30-user-guide-126.png "Page 127
125
Changing Camera Settings
Changing the Setting of Step Zooming
(STEP ZOOM)
The focal length with optical zooming can be fixed to any of seven
levels (28, 35, 50, 85, 105, 135, and 160 mm as converted
equivalent to 35 mm cameras) (Step Zoom).
To set whether to use step zooming (ON) or not (OFF), follow the
steps below.
1.Display the setup menu.
For detailed operation, see P.111.
2.Press the button to select [STEP
ZOOM] and press the $ button.
3.Press the ! buttons to select
the desired setting....")
125 Changing Camera Settings Changing the Setting of Step Zooming (STEP ZOOM) The focal length with optical zooming can be fixed to any of seven levels (28, 35, 50, 85, 105, 135, and 160 mm as converted equivalent to 35 mm cameras) (Step Zoom). To set whether to use step zooming (ON) or not (OFF), follow the steps below. 1.Display the setup menu. For detailed operation, see P.111. 2.Press the button to select [STEP ZOOM] and press the $ button. 3.Press the ! buttons to select the desired setting....
Page 128
126 Displaying a Setting Change War ning (SHTG STGS WARNG.) You can set the icon of a changed function to blink or a warning message indicating a change will be displayed at power-on for about 5 seconds if the initial settings are changed for the following functions. •White Balance •Focus • ISO Setting • Exposure Comp. •Time Exposure If you operate a camera button while an icon is blinking, the icon stops blinking and lights steadily. If you operate a camera button during a warning message display,...
Page 129
![Page 129
127
Changing Camera Settings
Changing the USB Communication System
(USB Connection)
If the USB communication system is changed (by selecting [MASS STR] at
[USB CONNECTION] on the Setup menu), files in the camera can be browsed
and transferred from the camera to your computer through the USB cable
without installing the accessory application or USB driver.
Usually, select [ORIGINAL]. When [ORIGINAL] is set, you can transfer images
to your computer using the supplied RICOH Gate La.
Caution
• At [MASS...](http://img.usermanuals.tech/thumb/64/49821/w300_ricoh_caplio_r30-user-guide-128.png "Page 129
127
Changing Camera Settings
Changing the USB Communication System
(USB Connection)
If the USB communication system is changed (by selecting [MASS STR] at
[USB CONNECTION] on the Setup menu), files in the camera can be browsed
and transferred from the camera to your computer through the USB cable
without installing the accessory application or USB driver.
Usually, select [ORIGINAL]. When [ORIGINAL] is set, you can transfer images
to your computer using the supplied RICOH Gate La.
Caution
• At [MASS...")
127 Changing Camera Settings Changing the USB Communication System (USB Connection) If the USB communication system is changed (by selecting [MASS STR] at [USB CONNECTION] on the Setup menu), files in the camera can be browsed and transferred from the camera to your computer through the USB cable without installing the accessory application or USB driver. Usually, select [ORIGINAL]. When [ORIGINAL] is set, you can transfer images to your computer using the supplied RICOH Gate La. Caution • At [MASS...
Page 130
![Page 130
128
To change the USB communication system, follow the steps below:
1.Display the setup menu.
For the operating procedure, see P.111.
2.Press the button to select [USB
CONNECTION] and press the $
button.
3.Press the ! button to select a
value.
4.Press the M/O or # button.
5.If the # button was pressed in
Step 4, press the M/O button.
These settings are used until they are changed the next time.
Reference
For how to transfer images using RICOH Gate La, see P.143.
Downloaded From camera-usermanual.com...](http://img.usermanuals.tech/thumb/64/49821/w300_ricoh_caplio_r30-user-guide-129.png "Page 130
128
To change the USB communication system, follow the steps below:
1.Display the setup menu.
For the operating procedure, see P.111.
2.Press the button to select [USB
CONNECTION] and press the $
button.
3.Press the ! button to select a
value.
4.Press the M/O or # button.
5.If the # button was pressed in
Step 4, press the M/O button.
These settings are used until they are changed the next time.
Reference
For how to transfer images using RICOH Gate La, see P.143.
Downloaded From camera-usermanual.com...")
128 To change the USB communication system, follow the steps below: 1.Display the setup menu. For the operating procedure, see P.111. 2.Press the button to select [USB CONNECTION] and press the $ button. 3.Press the ! button to select a value. 4.Press the M/O or # button. 5.If the # button was pressed in Step 4, press the M/O button. These settings are used until they are changed the next time. Reference For how to transfer images using RICOH Gate La, see P.143. Downloaded From camera-usermanual.com...