Ricoh B230 Service Manual
Here you can view all the pages of manual Ricoh B230 Service Manual. The Ricoh manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 71
![Page 71
SM 1-39 B230/B237
Installation
1. Install the two support brackets [A] on the left side of the machine
(
x 1 each).
2. Install the two support bracket covers [B] on the support brackets (
x 1 each).
Installation of the 500-Sheet Finisher
1. Unpack the finisher and remove all tapes and retainers.](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-70.png "Page 71
SM 1-39 B230/B237
Installation
1. Install the two support brackets [A] on the left side of the machine
(
x 1 each).
2. Install the two support bracket covers [B] on the support brackets (
x 1 each).
Installation of the 500-Sheet Finisher
1. Unpack the finisher and remove all tapes and retainers.")
SM 1-39 B230/B237 Installation 1. Install the two support brackets [A] on the left side of the machine ( x 1 each). 2. Install the two support bracket covers [B] on the support brackets ( x 1 each). Installation of the 500-Sheet Finisher 1. Unpack the finisher and remove all tapes and retainers.
Page 72
![Page 72
B230/B237 1-40 SM
2. Attach the paper guide [A].
3. Attach the unit holder [B] and the holder bracket [C] (knob screw x 4).
ƒ The holder bracket [C] must be placed outside the unit holder [B]. The holder
bracket is provided with the bridge unit (B227).
4. Install the 500-sheet finisher [D] on the machine (
x 1).
5. Attach the bracket cover [E].
6. Install the output tray [F] on the 500-sheet finisher (2 snap rings).
7. Pull out the tray extension [G] of the bridge unit.
8. Turn...](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-71.png "Page 72
B230/B237 1-40 SM
2. Attach the paper guide [A].
3. Attach the unit holder [B] and the holder bracket [C] (knob screw x 4).
ƒ The holder bracket [C] must be placed outside the unit holder [B]. The holder
bracket is provided with the bridge unit (B227).
4. Install the 500-sheet finisher [D] on the machine (
x 1).
5. Attach the bracket cover [E].
6. Install the output tray [F] on the 500-sheet finisher (2 snap rings).
7. Pull out the tray extension [G] of the bridge unit.
8. Turn...")
B230/B237 1-40 SM 2. Attach the paper guide [A]. 3. Attach the unit holder [B] and the holder bracket [C] (knob screw x 4). ƒ The holder bracket [C] must be placed outside the unit holder [B]. The holder bracket is provided with the bridge unit (B227). 4. Install the 500-sheet finisher [D] on the machine ( x 1). 5. Attach the bracket cover [E]. 6. Install the output tray [F] on the 500-sheet finisher (2 snap rings). 7. Pull out the tray extension [G] of the bridge unit. 8. Turn...
Page 73
SM 1-41 B230/B237 Installation 1.11 1000-SHEET FINISHER (B408) 1.11.1 ACCESSORY CHECK Check the quantity and condition of the accessories against the following list. No. Description Q’ty B230/B237 1 Front Joint Bracket 1 O 2 Rear Joint Bracket 1 --- 3 Rear Joint Bracket 1 O 4 Grounding Plate 1 O 5 Copy Tray 1 O 6 Staple Position Decal 1 O 7 Screw - M4 x 14 4 O 8 Knob Screw - M4 x 10 1 O 9 Screw - M3 x 8 1 O 10 Knob Screw - M3 x 8 1 O O = Necessary, --- =...
Page 74
![Page 74
B230/B237 1-42 SM
1.11.2 INSTALLATION PROCEDURE
ƒ Unplug the main machine power cord before starting the following
procedure.
If this finisher will be installed on the B230 or B237 copier, the following options must be
installed before installing this finisher.
- Bridge Unit (B227)
- Paper Feed Unit (B800) or LCT (B801)
1. Unpack the finisher, and then remove the stopper [A] and tapes (
x 1).
2. Install the front joint bracket [B], holder bracket [C] (
x 2 - M4 x 14), and rear...](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-73.png "Page 74
B230/B237 1-42 SM
1.11.2 INSTALLATION PROCEDURE
ƒ Unplug the main machine power cord before starting the following
procedure.
If this finisher will be installed on the B230 or B237 copier, the following options must be
installed before installing this finisher.
- Bridge Unit (B227)
- Paper Feed Unit (B800) or LCT (B801)
1. Unpack the finisher, and then remove the stopper [A] and tapes (
x 1).
2. Install the front joint bracket [B], holder bracket [C] (
x 2 - M4 x 14), and rear...")
B230/B237 1-42 SM 1.11.2 INSTALLATION PROCEDURE ƒ Unplug the main machine power cord before starting the following procedure. If this finisher will be installed on the B230 or B237 copier, the following options must be installed before installing this finisher. - Bridge Unit (B227) - Paper Feed Unit (B800) or LCT (B801) 1. Unpack the finisher, and then remove the stopper [A] and tapes ( x 1). 2. Install the front joint bracket [B], holder bracket [C] ( x 2 - M4 x 14), and rear...
Page 75
![Page 75
SM 1-43 B230/B237
Installation
3. Install the grounding plate [E] on the finisher (
x 2 - M3 x 8).
ƒ Use the screw removed in step 1 and the screw from the accessory box.
4. Open the front door [F] of the finisher, and then pull the locking lever [G].
5. Align the finisher on the joint brackets, and lock it in place by pushing the
locking lever.
6. Secure the locking lever (1 knob screw - M3 x 8).
7. Close the front door.
8. Install the copy tray [H] (1 knob screw - M4 x 10).
9....](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-74.png "Page 75
SM 1-43 B230/B237
Installation
3. Install the grounding plate [E] on the finisher (
x 2 - M3 x 8).
ƒ Use the screw removed in step 1 and the screw from the accessory box.
4. Open the front door [F] of the finisher, and then pull the locking lever [G].
5. Align the finisher on the joint brackets, and lock it in place by pushing the
locking lever.
6. Secure the locking lever (1 knob screw - M3 x 8).
7. Close the front door.
8. Install the copy tray [H] (1 knob screw - M4 x 10).
9....")
SM 1-43 B230/B237 Installation 3. Install the grounding plate [E] on the finisher ( x 2 - M3 x 8). ƒ Use the screw removed in step 1 and the screw from the accessory box. 4. Open the front door [F] of the finisher, and then pull the locking lever [G]. 5. Align the finisher on the joint brackets, and lock it in place by pushing the locking lever. 6. Secure the locking lever (1 knob screw - M3 x 8). 7. Close the front door. 8. Install the copy tray [H] (1 knob screw - M4 x 10). 9....
Page 76
B230/B237 1-44 SM 1.12 1000-SHEET BOOKLET FINISHER (B793) 1.12.1 ACCESSORY CHECK Check the quantity and condition of the accessories against the following list. No. Description Q’ty 1 Rear Joint Bracket 1 2 Front Joint Bracket 1 3 Grounding Plate 1 4 Upper Output Tray 1 5 Cushion 2 6 Lower Output Tray 1 7 Short Knob Screw 1 8 Long Knob Screw 1 9 Screw (M3 x 8) 2 10 Screw (M4 x 14) 4
Page 77
SM 1-45 B230/B237 Installation 1.12.2 INSTALLATION PROCEDURE ƒ Unplug the main machine power cord before starting the following procedure. The bridge unit (B227) and optional paper feed unit (B800 or B801) must be installed before installing this finisher (B793). 1. Unpack the finisher and remove all tapes and packing materials from the finisher.
Page 78
![Page 78
B230/B237 1-46 SM
2. Open the front door [A] of the 1000-sheet booklet finisher, and then pull out the
jogger unit [B].
3. Remove all tapes and packing materials from the inside of the finisher.
4. Attach the cushions [C] to the finisher.
ƒ Make sure that the cushions are placed within 0 to 1 mm [D] from the edge of
the cover or frame.
5. Install the ground plate [E] on the finisher (
x 2; M3 x 8).](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-77.png "Page 78
B230/B237 1-46 SM
2. Open the front door [A] of the 1000-sheet booklet finisher, and then pull out the
jogger unit [B].
3. Remove all tapes and packing materials from the inside of the finisher.
4. Attach the cushions [C] to the finisher.
ƒ Make sure that the cushions are placed within 0 to 1 mm [D] from the edge of
the cover or frame.
5. Install the ground plate [E] on the finisher (
x 2; M3 x 8).")
B230/B237 1-46 SM 2. Open the front door [A] of the 1000-sheet booklet finisher, and then pull out the jogger unit [B]. 3. Remove all tapes and packing materials from the inside of the finisher. 4. Attach the cushions [C] to the finisher. ƒ Make sure that the cushions are placed within 0 to 1 mm [D] from the edge of the cover or frame. 5. Install the ground plate [E] on the finisher ( x 2; M3 x 8).
Page 79
![Page 79
SM 1-47 B230/B237
Installation
6. Attach the rear joint bracket [F]
(
x 2, M4 x 14).
7. Attach the front joint bracket [G] and the holder bracket [H] (
x 2; M4 x 14).
ƒ The holder bracket [H] must be placed outside the front joint bracket [G]. The
holder bracket is provided with the bridge unit (B227).
8. Pull the lock lever [I] (Long knob screw x 1).
9. Slowly push the finisher to the left side of the machine, keeping its front door
open until the brackets [J] [K] go into...](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-78.png "Page 79
SM 1-47 B230/B237
Installation
6. Attach the rear joint bracket [F]
(
x 2, M4 x 14).
7. Attach the front joint bracket [G] and the holder bracket [H] (
x 2; M4 x 14).
ƒ The holder bracket [H] must be placed outside the front joint bracket [G]. The
holder bracket is provided with the bridge unit (B227).
8. Pull the lock lever [I] (Long knob screw x 1).
9. Slowly push the finisher to the left side of the machine, keeping its front door
open until the brackets [J] [K] go into...")
SM 1-47 B230/B237 Installation 6. Attach the rear joint bracket [F] ( x 2, M4 x 14). 7. Attach the front joint bracket [G] and the holder bracket [H] ( x 2; M4 x 14). ƒ The holder bracket [H] must be placed outside the front joint bracket [G]. The holder bracket is provided with the bridge unit (B227). 8. Pull the lock lever [I] (Long knob screw x 1). 9. Slowly push the finisher to the left side of the machine, keeping its front door open until the brackets [J] [K] go into...
Page 80
![Page 80
B230/B237 1-48 SM
13. Install the upper output tray [M] (Short knob screw x 1).
14. Install the lower output tray [N].
15. Turn on the main power switch of the machine.
16. Check the 1000-sheet booklet finisher operation.](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-79.png "Page 80
B230/B237 1-48 SM
13. Install the upper output tray [M] (Short knob screw x 1).
14. Install the lower output tray [N].
15. Turn on the main power switch of the machine.
16. Check the 1000-sheet booklet finisher operation.")
B230/B237 1-48 SM 13. Install the upper output tray [M] (Short knob screw x 1). 14. Install the lower output tray [N]. 15. Turn on the main power switch of the machine. 16. Check the 1000-sheet booklet finisher operation.