Ricoh B230 Service Manual

 
 
 
 
 
 
INSTALLATION 
 
  

Installation Requirements 
SM 1-1 B230/B237 
Installation 
1. INSTALLATION 
1.1 INSTALLATION REQUIREMENTS 
1.1.1 ENVIRONMENT 
 
1.  Temperature Range: 10°C to 32°C (50°F to 89.6°F) 
2.  Humidity Range: 15% to 80% RH 
3.  Ambient Illumination: Less than 1500 lux (do not expose to direct sunlight) 
4.  Ventilation: 3 times/hr/person or more 
5.  Do not let the machine get exposed to the following:   
1) Cool air from an air conditioner 
2) Heat from a heater 
6.  Do not install the machine in areas that...

 
B230/B237 1-2  SM 
1.1.3  MACHINE SPACE REQUIREMENTS 
 
ƒ  This machine, which uses high voltage power sources, can generate ozone gas. 
High ozone density is harmful to human health. Therefore, the machine must be 
installed in a well-ventilated room. 
 
A: Over 100 mm (3.9) 
B: Over 100 mm (3.9) 
C: Over 100 mm (3.9) 
D: Over 100 mm (3.9) 
Put the machine near the power source with the clearance shown above. 
1.1.4 POWER REQUIREMENTS 
 
ƒ  Insert the plug firmly in the outlet. 
ƒ  Do not use an...

  
SM 1-3 B230/B237 
Installation 
1.2  OPTIONAL UNIT COMBINATIONS 
1.2.1 MACHINE OPTIONS 
 
No. Options Remarks 
1  2-tray paper feed unit 
2  Large capacity tray One from No.1 or No.2 
3 Platen cover 
4 ARDF One from No.3 or No.4 
5  1-bin tray unit  - 
6 Bridge unit 
7 Shift tray One from No.6 or No.7 
8  1000-sheet booklet finisher   One from No.8, No.10 or No.11; 
Requires No.6 and one from No.1 and 
No.2. 
9  *Punch kit (3 types)  No. 8 required; One of the three types 
10 1000-sheet finisher  One...

 
B230/B237 1-4  SM 
1.2.2 CONTROLLER OPTIONS 
No. Options Remarks 
1 IEEE 1394 
2  USB Host Interface Unit One from the two (I/F Slot A) 
3 IEEE 802.11b 
4 IEEE 1284 
5 Bluetooth One from the three (I/F Slot B) 
6 File Format Converter I/F Slot C 
Requires fax unit option (B786) 
7 PostScript 3 
8 PictBridge Option 
9  Data Overwrite Security Unit One from the three (SD card slot 2) 
11  Browser Unit  SD card slot 3 (during installation only) 
12  Copy Data Security Unit  - 
  

  
SM 1-5 B230/B237 
Installation 
1.3 COPIER INSTALLATION 
 
ƒ  Make sure that the image transfer belt is in its correct position before you move the 
machine. Otherwise, the image transfer belt and the black PCU can be damaged. 
1.3.1  POWER SOCKETS FOR PERIPHERALS 
 
ƒ  Rating voltage for peripherals.   
ƒ  Make sure to plug the cables into the correct sockets. 
  

 
B230/B237 1-6  SM 
1.3.2 INSTALLATION FLOW CHART 
This flow chart shows the best procedure for installation. 
 
You need the optional paper tray unit or the LCT if you want to install the finisher (B408 or 
B793). 
The punch unit is for 1000-sheet booklet finisher (B793).  

  
SM 1-7 B230/B237 
Installation 
1.3.3 ACCESSORY CHECK 
Check the quantity and condition of these accessories. 
 
 Description Qty Destination 
1.  Operating Instruction - Troubleshooting  1  -57 -29 -58 -21 -19 
2.  Operating Instruction - About This Machine  1  -57 -29 -58 -21 -19 
3.  Operating Instruction - Security  1  -57 -29 -58 -21 -19 
4.  Operation Instruction - Quick Reference Guide  1  -29 -21 -19 
5.  Operation Instruction - Printer Quick Reference  1  -29 -21 -19 
6.  Operation...

 
B230/B237 1-8  SM 
 Description Qty Destination 
19  Operating Instructions Holder  1 -57 -67 -29 -28 -21 -19 
-58 -26 
20 Ferrite Core  1 -57 -67 -29 -28 -21 -19 
-58 -26 
21  Power Supply Cord  1 -57 -67 -29 -28 -21 -19 
-58 
22 Cover  1 -57 -67 -29 -28 -21 -19 
-58 -26 
23  Decal - Paper Size  1 -57 -67 -29 -28 -21 -19 
-58 -26 
24  Emblem Cover  1  -57 -67 -29 -58 
25  Sheet - Eula: 16 Languages  1  -57 -67 -29 -26 -58 
26  Sheet - Caution 16 Languages  1  -57 -67 -29 -26 -58 
27  Decal - Safety...