Ricoh B230 Service Manual
Here you can view all the pages of manual Ricoh B230 Service Manual. The Ricoh manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 501
![Page 501
SM 5-135 B230/B237
Service
Tables
(77 mm/s): 2nd Side
003 Paper Transfer: FINE: 1st
Side *ENG
004 Paper Transfer: FINE:
2nd Side *ENGNot used
005-008 Adjusts the environment coefficient for each mode. When the environment is
detected as HH, SP2851 is multiplied by these SP values.
005 Separation DC: Thick 1
(77 mm/s): 1st Side *ENG
006 Separation DC: Thick 1
(77 mm/s): 2nd Side: *ENG[10 to 250 / 80 / 5%/step]
007 Separation DC: FINE: 1st
Side *ENG
008 Separation DC: FINE:
2nd Side *ENGNot...](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-500.png "Page 501
SM 5-135 B230/B237
Service
Tables
(77 mm/s): 2nd Side
003 Paper Transfer: FINE: 1st
Side *ENG
004 Paper Transfer: FINE:
2nd Side *ENGNot used
005-008 Adjusts the environment coefficient for each mode. When the environment is
detected as HH, SP2851 is multiplied by these SP values.
005 Separation DC: Thick 1
(77 mm/s): 1st Side *ENG
006 Separation DC: Thick 1
(77 mm/s): 2nd Side: *ENG[10 to 250 / 80 / 5%/step]
007 Separation DC: FINE: 1st
Side *ENG
008 Separation DC: FINE:
2nd Side *ENGNot...")
SM 5-135 B230/B237 Service Tables (77 mm/s): 2nd Side 003 Paper Transfer: FINE: 1st Side *ENG 004 Paper Transfer: FINE: 2nd Side *ENGNot used 005-008 Adjusts the environment coefficient for each mode. When the environment is detected as HH, SP2851 is multiplied by these SP values. 005 Separation DC: Thick 1 (77 mm/s): 1st Side *ENG 006 Separation DC: Thick 1 (77 mm/s): 2nd Side: *ENG[10 to 250 / 80 / 5%/step] 007 Separation DC: FINE: 1st Side *ENG 008 Separation DC: FINE: 2nd Side *ENGNot...
Page 502
![Page 502
B230/B237 5-136 SM
[Image Transfer Roller Brake Time]
2903
Adjusts the time when the image transfer belt motor reverses from normal
rotation after job end. DFU
003 Plain *ENG
004 Thick 1 *ENG
005 Thick 2 & FINE *ENG[100 to 1500 / 500 / 10 msec/step]
[OPC Drum Reverse Time]
2904
Adjusts the time for how long the image transfer belt motor reverses after job
end. DFU
003 All *ENG
[0 to 200 / 30 / 10 msec/step]
[ACS Setting (FC to Bk)]
2907 Adjusts the threshold for moving away...](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-501.png "Page 502
B230/B237 5-136 SM
[Image Transfer Roller Brake Time]
2903
Adjusts the time when the image transfer belt motor reverses from normal
rotation after job end. DFU
003 Plain *ENG
004 Thick 1 *ENG
005 Thick 2 & FINE *ENG[100 to 1500 / 500 / 10 msec/step]
[OPC Drum Reverse Time]
2904
Adjusts the time for how long the image transfer belt motor reverses after job
end. DFU
003 All *ENG
[0 to 200 / 30 / 10 msec/step]
[ACS Setting (FC to Bk)]
2907 Adjusts the threshold for moving away...")
B230/B237 5-136 SM [Image Transfer Roller Brake Time] 2903 Adjusts the time when the image transfer belt motor reverses from normal rotation after job end. DFU 003 Plain *ENG 004 Thick 1 *ENG 005 Thick 2 & FINE *ENG[100 to 1500 / 500 / 10 msec/step] [OPC Drum Reverse Time] 2904 Adjusts the time for how long the image transfer belt motor reverses after job end. DFU 003 All *ENG [0 to 200 / 30 / 10 msec/step] [ACS Setting (FC to Bk)] 2907 Adjusts the threshold for moving away...
Page 503
![Page 503
SM 5-137 B230/B237
Service
Tables
[Motor Start Control]
2909
Not used
001 On *ENG[0 to 1 / 0 / 1 sheet/step]
0: normal, 1: synchro
[Motor Stop Control]
2910
Not used
001 On *ENG[0 to 1 / 0 / 1 sheet/step]
0: normal, 1: synchro
[Drum Stop Timing] OPC Drum Motor Stop Timing Adjustment
2911
Not used
001 Bk *ENG
002 MCY *ENG[0 to 360 / 30 / 6 deg/step]
[Gear Phase Control Result]
2912
DFU
001 Bk - M *ENG
[–180 to 180 / 0 / 1 deg/step]
[Gear Phase Control]
2913
Enables...](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-502.png "Page 503
SM 5-137 B230/B237
Service
Tables
[Motor Start Control]
2909
Not used
001 On *ENG[0 to 1 / 0 / 1 sheet/step]
0: normal, 1: synchro
[Motor Stop Control]
2910
Not used
001 On *ENG[0 to 1 / 0 / 1 sheet/step]
0: normal, 1: synchro
[Drum Stop Timing] OPC Drum Motor Stop Timing Adjustment
2911
Not used
001 Bk *ENG
002 MCY *ENG[0 to 360 / 30 / 6 deg/step]
[Gear Phase Control Result]
2912
DFU
001 Bk - M *ENG
[–180 to 180 / 0 / 1 deg/step]
[Gear Phase Control]
2913
Enables...")
SM 5-137 B230/B237 Service Tables [Motor Start Control] 2909 Not used 001 On *ENG[0 to 1 / 0 / 1 sheet/step] 0: normal, 1: synchro [Motor Stop Control] 2910 Not used 001 On *ENG[0 to 1 / 0 / 1 sheet/step] 0: normal, 1: synchro [Drum Stop Timing] OPC Drum Motor Stop Timing Adjustment 2911 Not used 001 Bk *ENG 002 MCY *ENG[0 to 360 / 30 / 6 deg/step] [Gear Phase Control Result] 2912 DFU 001 Bk - M *ENG [–180 to 180 / 0 / 1 deg/step] [Gear Phase Control] 2913 Enables...
Page 504
![Page 504
B230/B237 5-138 SM
001 Stop Delay: Open *ENG
002 Stop Delay: Close *ENGDFU
[1 to 50 / 38 / 1 ms/step]
003 Open Execution *ENGOpens the shutter on the laser optics
housing unit manually for test purposes.
004 Close Execution *ENGCloses the shutter on the laser optics
housing unit manually for test purposes.
007 Presence *ENG Not used
[GainAdjust] Gain Adjustment of OPC Bk Drum Motor
2915
DFU
001 154 mm/sec *ENG
002 138 mm/sec *ENG
003 115 mm/sec *ENG
004 77 mm/sec *ENG[0 or 1 /...](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-503.png "Page 504
B230/B237 5-138 SM
001 Stop Delay: Open *ENG
002 Stop Delay: Close *ENGDFU
[1 to 50 / 38 / 1 ms/step]
003 Open Execution *ENGOpens the shutter on the laser optics
housing unit manually for test purposes.
004 Close Execution *ENGCloses the shutter on the laser optics
housing unit manually for test purposes.
007 Presence *ENG Not used
[GainAdjust] Gain Adjustment of OPC Bk Drum Motor
2915
DFU
001 154 mm/sec *ENG
002 138 mm/sec *ENG
003 115 mm/sec *ENG
004 77 mm/sec *ENG[0 or 1 /...")
B230/B237 5-138 SM 001 Stop Delay: Open *ENG 002 Stop Delay: Close *ENGDFU [1 to 50 / 38 / 1 ms/step] 003 Open Execution *ENGOpens the shutter on the laser optics housing unit manually for test purposes. 004 Close Execution *ENGCloses the shutter on the laser optics housing unit manually for test purposes. 007 Presence *ENG Not used [GainAdjust] Gain Adjustment of OPC Bk Drum Motor 2915 DFU 001 154 mm/sec *ENG 002 138 mm/sec *ENG 003 115 mm/sec *ENG 004 77 mm/sec *ENG[0 or 1 /...
Page 505
![Page 505
SM 5-139 B230/B237
Service
Tables
001 Voltage *ENG
[0 to 7000 / 5000 / 10 –V/step]
[SecondaryFB: Plain]
2931
Adjusts the upper limit voltage for the paper transfer roller. These SPs are only
used for plain paper use in full color mode.
001 Limit Voltage: Division 1 *ENG
[0 to 7000 / 6000 / 10 –V/step]
002 Limit Voltage: Division 2 *ENG
[0 to 7000 / 5000 / 10 –V/step]
[SecondaryFB: Thin]
2932
Adjusts the upper limit voltage for the paper transfer roller. These SPs are only
used...](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-504.png "Page 505
SM 5-139 B230/B237
Service
Tables
001 Voltage *ENG
[0 to 7000 / 5000 / 10 –V/step]
[SecondaryFB: Plain]
2931
Adjusts the upper limit voltage for the paper transfer roller. These SPs are only
used for plain paper use in full color mode.
001 Limit Voltage: Division 1 *ENG
[0 to 7000 / 6000 / 10 –V/step]
002 Limit Voltage: Division 2 *ENG
[0 to 7000 / 5000 / 10 –V/step]
[SecondaryFB: Thin]
2932
Adjusts the upper limit voltage for the paper transfer roller. These SPs are only
used...")
SM 5-139 B230/B237 Service Tables 001 Voltage *ENG [0 to 7000 / 5000 / 10 –V/step] [SecondaryFB: Plain] 2931 Adjusts the upper limit voltage for the paper transfer roller. These SPs are only used for plain paper use in full color mode. 001 Limit Voltage: Division 1 *ENG [0 to 7000 / 6000 / 10 –V/step] 002 Limit Voltage: Division 2 *ENG [0 to 7000 / 5000 / 10 –V/step] [SecondaryFB: Thin] 2932 Adjusts the upper limit voltage for the paper transfer roller. These SPs are only used...
Page 506
![Page 506
B230/B237 5-140 SM
[SecondaryFB: Thick 1]
2935
Adjusts the upper limit voltage for the paper transfer roller. These SPs are only
used for thick 1 paper use in full color mode.
001 Limit Voltage: Division 1 *ENG
[0 to 7000 / 6000 / 10 –V/step]
002 Limit Voltage: Division 2 *ENG
[0 to 7000 / 5000 / 10 –V/step]
[SecondaryFB: Thick 2]
2936
Adjusts the upper limit voltage for the paper transfer roller. These SPs are only
used for thick 2 paper use in full color mode.
001 Limit Voltage:...](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-505.png "Page 506
B230/B237 5-140 SM
[SecondaryFB: Thick 1]
2935
Adjusts the upper limit voltage for the paper transfer roller. These SPs are only
used for thick 1 paper use in full color mode.
001 Limit Voltage: Division 1 *ENG
[0 to 7000 / 6000 / 10 –V/step]
002 Limit Voltage: Division 2 *ENG
[0 to 7000 / 5000 / 10 –V/step]
[SecondaryFB: Thick 2]
2936
Adjusts the upper limit voltage for the paper transfer roller. These SPs are only
used for thick 2 paper use in full color mode.
001 Limit Voltage:...")
B230/B237 5-140 SM [SecondaryFB: Thick 1] 2935 Adjusts the upper limit voltage for the paper transfer roller. These SPs are only used for thick 1 paper use in full color mode. 001 Limit Voltage: Division 1 *ENG [0 to 7000 / 6000 / 10 –V/step] 002 Limit Voltage: Division 2 *ENG [0 to 7000 / 5000 / 10 –V/step] [SecondaryFB: Thick 2] 2936 Adjusts the upper limit voltage for the paper transfer roller. These SPs are only used for thick 2 paper use in full color mode. 001 Limit Voltage:...
Page 507
![Page 507
SM 5-141 B230/B237
Service
Tables
used for special 3 paper use in full color mode.
001 Limit Voltage: Division 1 *ENG
[0 to 7000 / 6000 / 10 –V/step]
002 Limit Voltage: Division 2 *ENG
[0 to 7000 / 5000 / 10 –V/step]
SP3-XXX (Process)
3011 [Process Cont. Manual Execution]
001 Normal Executes the normal process control
manually (potential control).
Check the result with SP3-325-001 and
3-012-001 after executing this SP.
002 Density Adjustment Executes the toner density adjustment...](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-506.png "Page 507
SM 5-141 B230/B237
Service
Tables
used for special 3 paper use in full color mode.
001 Limit Voltage: Division 1 *ENG
[0 to 7000 / 6000 / 10 –V/step]
002 Limit Voltage: Division 2 *ENG
[0 to 7000 / 5000 / 10 –V/step]
SP3-XXX (Process)
3011 [Process Cont. Manual Execution]
001 Normal Executes the normal process control
manually (potential control).
Check the result with SP3-325-001 and
3-012-001 after executing this SP.
002 Density Adjustment Executes the toner density adjustment...")
SM 5-141 B230/B237 Service Tables used for special 3 paper use in full color mode. 001 Limit Voltage: Division 1 *ENG [0 to 7000 / 6000 / 10 –V/step] 002 Limit Voltage: Division 2 *ENG [0 to 7000 / 5000 / 10 –V/step] SP3-XXX (Process) 3011 [Process Cont. Manual Execution] 001 Normal Executes the normal process control manually (potential control). Check the result with SP3-325-001 and 3-012-001 after executing this SP. 002 Density Adjustment Executes the toner density adjustment...
Page 508
![Page 508
B230/B237 5-142 SM
See the troubleshooting section for details.
001 History: Latest *ENG
002 Result: Latest 1 *ENG
003 Result: Latest 2 *ENG
004 Result: Latest 3 *ENG
005 Result: Latest 4 *ENG
006 Result: Latest 5 *ENG
007 Result: Latest 6 *ENG
008 Result: Latest 7 *ENG
009 Result: Latest 8 *ENG
010 Result: Latest 9 *ENG[ 11111111 t o 99999999 / - / 1/step]
3013 [T Sensor Initial Set: Execution] Developer Initialization Setting
001 Execution: ALL -
002 Execution: COL...](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-507.png "Page 508
B230/B237 5-142 SM
See the troubleshooting section for details.
001 History: Latest *ENG
002 Result: Latest 1 *ENG
003 Result: Latest 2 *ENG
004 Result: Latest 3 *ENG
005 Result: Latest 4 *ENG
006 Result: Latest 5 *ENG
007 Result: Latest 6 *ENG
008 Result: Latest 7 *ENG
009 Result: Latest 8 *ENG
010 Result: Latest 9 *ENG[ 11111111 t o 99999999 / - / 1/step]
3013 [T Sensor Initial Set: Execution] Developer Initialization Setting
001 Execution: ALL -
002 Execution: COL...")
B230/B237 5-142 SM See the troubleshooting section for details. 001 History: Latest *ENG 002 Result: Latest 1 *ENG 003 Result: Latest 2 *ENG 004 Result: Latest 3 *ENG 005 Result: Latest 4 *ENG 006 Result: Latest 5 *ENG 007 Result: Latest 6 *ENG 008 Result: Latest 7 *ENG 009 Result: Latest 8 *ENG 010 Result: Latest 9 *ENG[ 11111111 t o 99999999 / - / 1/step] 3013 [T Sensor Initial Set: Execution] Developer Initialization Setting 001 Execution: ALL - 002 Execution: COL...
Page 509
![Page 509
SM 5-143 B230/B237
Service
Tables
meaning of each code.
All colors are displayed. Values are displayed in the order Y C M Bk.
e.g., 1 (Y) 2 (C) 1 (M) 1 (Bk): Initialization of Cyan failed but the others
succeeded.
3015 [Forced Toner Supply] Forced Toner Supply ([Color])
001 Execution: ALL -
002 Execution: COL (MCY) -
003 Execution: Bk -
004 Execution: M -
005 Execution: C -
006 Execution: Y - Executes the manual toner supply to the
development unit.
[Forced Toner Supply:...](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-508.png "Page 509
SM 5-143 B230/B237
Service
Tables
meaning of each code.
All colors are displayed. Values are displayed in the order Y C M Bk.
e.g., 1 (Y) 2 (C) 1 (M) 1 (Bk): Initialization of Cyan failed but the others
succeeded.
3015 [Forced Toner Supply] Forced Toner Supply ([Color])
001 Execution: ALL -
002 Execution: COL (MCY) -
003 Execution: Bk -
004 Execution: M -
005 Execution: C -
006 Execution: Y - Executes the manual toner supply to the
development unit.
[Forced Toner Supply:...")
SM 5-143 B230/B237 Service Tables meaning of each code. All colors are displayed. Values are displayed in the order Y C M Bk. e.g., 1 (Y) 2 (C) 1 (M) 1 (Bk): Initialization of Cyan failed but the others succeeded. 3015 [Forced Toner Supply] Forced Toner Supply ([Color]) 001 Execution: ALL - 002 Execution: COL (MCY) - 003 Execution: Bk - 004 Execution: M - 005 Execution: C - 006 Execution: Y - Executes the manual toner supply to the development unit. [Forced Toner Supply:...
Page 510
![Page 510
B230/B237 5-144 SM
004 Lower Threshold *ENG
[0 to 5 / 0.5 / 0.01 V/step]
005 Number of Lower counter *ENG
[0 to 99 / 10 / 1 time/step]
006 Upper Counter: Bk *ENG
007 Upper Counter: M *ENG
008 Upper Counter: C *ENG
009 Upper Counter: Y *ENG
010 Lower Counter: Bk *ENG
011 Lower Counter: M *ENG
012 Lower Counter: C *ENG
013 Lower Counter: Y *ENG[0 to 99 / 0/ 1 time/step]
[TD Sensor Initial Set] Developer Initialization Setting
3021
Specifies the developer agitation time for each...](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-509.png "Page 510
B230/B237 5-144 SM
004 Lower Threshold *ENG
[0 to 5 / 0.5 / 0.01 V/step]
005 Number of Lower counter *ENG
[0 to 99 / 10 / 1 time/step]
006 Upper Counter: Bk *ENG
007 Upper Counter: M *ENG
008 Upper Counter: C *ENG
009 Upper Counter: Y *ENG
010 Lower Counter: Bk *ENG
011 Lower Counter: M *ENG
012 Lower Counter: C *ENG
013 Lower Counter: Y *ENG[0 to 99 / 0/ 1 time/step]
[TD Sensor Initial Set] Developer Initialization Setting
3021
Specifies the developer agitation time for each...")
B230/B237 5-144 SM 004 Lower Threshold *ENG [0 to 5 / 0.5 / 0.01 V/step] 005 Number of Lower counter *ENG [0 to 99 / 10 / 1 time/step] 006 Upper Counter: Bk *ENG 007 Upper Counter: M *ENG 008 Upper Counter: C *ENG 009 Upper Counter: Y *ENG 010 Lower Counter: Bk *ENG 011 Lower Counter: M *ENG 012 Lower Counter: C *ENG 013 Lower Counter: Y *ENG[0 to 99 / 0/ 1 time/step] [TD Sensor Initial Set] Developer Initialization Setting 3021 Specifies the developer agitation time for each...