Ricoh Aficio MP 8000SP User Manual

Administrator Tools
71
2
Program / Change / Delete LDAP Server
This section describes how to specify the LDAP server settings.
To program / change the LDAP server
APress [System Settings].
BPress [Administrator Tools], and then press [TNext] twice.
CPress [Program / Change / Delete LDAP Server].
DCheck that [Program / Change] is selected.
ESelect the LDAP server you want to program or change.
When programming the server, select [Not Programmed].
FSet each item as necessary.
GPress [OK] after setting each...

System Settings
72
2
Programming the LDAP server
This section describes how to program the LDAP server.
To enter an identification name
APress [Change] under “Name”.
Register a name for the LDAP server that will appear on the server selection
screen of the LDAP search operation.
BEnter the server’s identification name.
CPress [OK].
To enter a server name
APress [Change] under “Server Name”.
Register the LDAP server’s host name or IPv4 address.
BEnter the LDAP server name.
CPress [OK].
To enter the search...

Administrator Tools
73
2
To enter a port number
APress [Change] under “Port Number”.
Specify the port number for communicating with the LDAP server. Specify a
port that is compliant with your environment.
BEnter the port number using the number keys, and then press the {#} key.
When SSL is set to [On], the port number automatically changes to “636”.
To start SSL communication
APress [On] under “Use Secure Connection(SSL)”.
Use SSL to communicate with the LDAP server.
To use SSL, the LDAP server must...

System Settings
74
2
To enter the user name and password
APress [TNext].
BPress [Change] under “User Name”.
When [On] or [High Security] is selected for the authentication setting, use the
administrator account name and password. Do not enter the administrator
account name and password when using authentication for each individual
or each search.
CEnter the user name, and then press [OK].
Procedures for the user name setting differ depending on server environ-
ment. Check your server environment before...

Administrator Tools
75
2
To set search conditions
APress [TNext] twice.
BPress [Change] for items you want to use as search conditions from the fol-
lowing: “Name”, “E-mail Address”, “Fax Number”, “Company Name”, and
“Department Name”.
You can enter an attribute as a typical search keyword. Using the entered at-
tribute, the function searches the LDAP server’s Address Book.
CEnter the attribute you want to use when searching for e-mail addresses,
and then press [OK].
The attribute value may change...

System Settings
76
2
EEnter the key display, and then press [OK].
The registered “key display” appears as a keyword for searching LDAP.
 Without key display registration
 With key display registration
The key does not appear on the search screen unless both “Attribute” and
“Key Display” are registered. Make sure you register both to use the optional
search.
Downloaded From ManualsPrinter.com Manuals 

System Settings on Main and Sub-machines
77
2
System Settings on Main and Sub-machines
This section describes the System Settings on the two machines during Connect
Copy.
When connect copy is in progress, the {User Tools/Counter} keys of the sub-ma-
chines remain disabled. To change the default settings, first press [Connect Copy],
which is highlighted on main machines control screen, then clear the connect
copy job, and then make the required changes.
General Features
How the defaults in the General...

System Settings
78
2
❖Function Reset Timer
 Settings made on the main and sub-machines do not affect the connect
copy.
❖Interleave Print
 Settings made on the main and sub-machines do not affect the connect
copy.
❖Output: Copier
 The main machine applies the setting that has been made on it. Sub-ma-
chines also apply their own respective settings.
❖Output: Document Server
 The main machine applies the setting that has been made on it. Sub-ma-
chines also apply their own respective settings.
❖Output:...

System Settings on Main and Sub-machines
79
2
Tray Paper Settings
How the defaults in the Tray Paper Settings of copying of the main and sub-ma-
chines are used in connect copy will be explained.
❖Paper Tray Priority: Copier
 The main machine applies the setting that has been made on it. Sub-ma-
chines also apply their own respective settings.
❖Paper Tray Priority: Facsimile (facsimile)
 The main machine applies the setting that has been made on it. Sub-ma-
chines also apply their own respective...

System Settings
80
2
❖Front Cover Sheet Tray
 The main machine applies the setting that has been made on it. Sub-ma-
chines also apply their own respective settings.
❖Back Cover Sheet Tray
 The main machine applies the setting that has been made on it. Sub-ma-
chines also apply their own respective settings.
❖Slip Sheet Tray
 The main machine applies the setting that has been made on it. Sub-ma-
chines also apply their own respective settings.
❖Designation Sheet 1 Tray, Designation Sheet 2 Tray
 The...