Ricoh Aficio MP 8000SP User Manual

Reproduction Ratio
91
3
Inch version
 25%
 11”×17” → 5
1/2”×81/2” (50%)
 11”×17” → 8
1/2”×11” (65%)
 11”×15” → 8
1/2”×11” (73%)
8
1/2”×14” → 81/2”×11” (78%)
8
1/2”×13” → 81/2”×11” (85%)
 93%
8
1/2”×14” → 11”×17” (121%)
8
1/2”×11” → 11”×17” (129%)
5
1/2”×81/2” → 81/2”×14” (155%)
5
1/2×81/2 → 11×17 (200%)
 400%
 User R / E Ratio (25-400%)
❖R / E Ratio Priority
You can set the ratio with priority when [Reduce/ Enlarge] is pressed.
The default setting is 71% (Metric version) / 73% (Inch...

Copier/Document Server Features
92
3Edit
This section describes the user tools in the Edit menu under Copier/Document
Server Features.
Default settings are shown in bold type.
Enter the width of the binding margin with the number keys as follows:
 Metric version: 0–30 mm (in increments of 1 mm)
 Inch version: 0-1.2 (in increments of 0.1 inch)
Enter the width of the erased margin with the number keys as follows:
 Metric version: 2–99 mm (in increments of 1 mm)
  Inch version: 0.1-3.9 (in increments of...

Edit
93
3
❖Erase Border Width
You can specify the width of the erased border margins with this function.
The default setting is 10 mm (Metric version) / 0.4 (Inch version).
❖Erase Original Shadow in Combine
In Combine mode, you can specify whether to erase a 3 mm, 0.1 boundary
margin around all four edges of each original.
The default setting is On.
❖Erase Centre Width
You can specify the width of the erased centre margins with this function.
The default setting is 10 mm (Metric version) / 0.4 (Inch...

Copier/Document Server Features
94
3
❖Image Repeat Separation Line
You can select a separation line using the Image Repeat function from: None,
Solid, Broken A, Broken B, or Crop Marks.
None
 Solid
Broken A
Broken B
 Crop Marks
The default setting is None.
❖Double Copies Separation Line
You can select a separation line using the Double Copies function from: None,
Solid, Broken A, Broken B, or Crop Marks.
None
 Solid
Broken A
Downloaded From ManualsPrinter.com Manuals 

Edit
95
3
Broken B
 Crop Marks
The default setting is None.
❖Separation Line in Combine
You can select a separation line using the Combine function from: None, Sol-
id, Broken A, Broken B, or Crop Marks.
None
 Solid
Broken A
Broken B
 Crop Marks
The default setting is None.
❖Copy Back Cover
When copying the back cover, you can specify whether to have the back cover
outside (outside page) or inside (inside page).
The default setting is Outside.
Reference
p.3 “Accessing User Tools”...

Copier/Document Server Features
96
3Stamp
This section describes the user tools in the Stamp menu under Copier/Docu-
ment Server Features.
Reference
p.3 “Accessing User Tools”
Background Numbering
This section describes the user tools in the Background Numbering menu under
Stamp.
Default settings are shown in bold type.
❖Size
You can set the size of the numbers.
The default setting is Normal.
❖Density
You can set the density of the numbers.
The default setting is Normal.
Preset Stamp
This section...

Stamp
97
3
Stamp Position
You can adjust the position of the stamp within the available range as
shown below.
Metric version:
 “Top Left”…T/B: 4-144mm, L/R: 4-144mm
 “Top Centre”…T/B: 4-144mm, L/R: 72-72mm
 “Top Right”…T/B: 4-144mm, L/R: 4-144mm
 “Centre Left”…T/B: 72-72mm, L/R: 4-144mm
 “Centre”…T/B: 72-72mm, L/R: 72-72mm
 “Centre Right”…T/B: 72-72mm, L/R: 4-144mm
 “Bottom Left”…T/B: 4-144mm, L/R: 4-144mm
 “Bottom Centre”…T/B: 4-144mm, L/R: 72-72mm
 “Bottom Right”…T/B: 4-144mm, L/R: 4-144mm...

Copier/Document Server Features
98
3
User Stamp
This section describes the user tools in the User Stamp menu under Stamp.
Default settings are shown in bold type.
❖Program / Delete Stamp
You can register, change, or delete these designs as user stamps.
You can register up to four custom stamps with your favourite designs.
❖Stamp Format: 1, Stamp Format: 2, Stamp Format: 3, Stamp Format: 4
You can specify how each of registered User Stamps 1 to 4 is printed.
Stamp Position
You can specify where to print...

Stamp
99
3
Reference
“User Stamp”, Copy/ Document Server Reference
Date Stamp
This section describes the user tools in the Date Stamp menu under Stamp.
Default settings are shown in bold type.
❖Format
You can select the date format for Date Stamp mode.
The default setting is DD / MM / YYYY (Metric version) / MM / DD / YYYY
(Inch version).
❖Font
You can select the Date Stamp font.
The default setting is Font 1.
❖Size
You can set the Date Stamp size.
The default setting is Auto.
❖Superimpose
You can have...

Copier/Document Server Features
100
3
Inch version:
 “Top Left”…T/B: 0.1-5.7, L/R: 0.1-5.7
 “Top Centre”…T/B: 0.1-5.7, L/R: 2.8-2.8
 “Top Right”…T/B: 0.1-5.7, L/R: 0.1-5.7
 “Bottom Left”…T/B: 0.1-5.7, L/R: 0.1-5.7
 “Bottom Centre”…T/B: 0.1-5.7, L/R: 2.8-2.8
 “Bottom Right”…T/B: 0.1-5.7, L/R: 0.1-5.7
 Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
The default setting is All Pages.
Page Numbering
This section describes the user tools in the Page Numbering menu...