Ricoh Aficio MP 8000SP User Manual

General Features
41
2
❖Output: Copier (copier)
You can specify a tray to which documents are delivered.
1.Copy Tray
2.Finisher Upper Tray
3.Finisher Shift Tray
The default setting is Copy Tray.
❖Output: Document Server (Document Server)
You can specify a tray to which documents are delivered.
The default setting is Copy Tray.
❖Output: Facsimile (facsimile)
Specify a tray to which documents are delivered.
The default setting is Copy Tray.
❖Output: Printer (printer)
You can specify a tray to which...

System Settings
42
2
❖Key Repeat
You can enable or disable repetition of an operation if a key on the screen or
control panel is pressed continuously.
The default setting is Normal.
❖Z-fold Position
If you specify Z-folding, set the fold-back position in 1 mm (0.1) increments.
The setting ranges of the folding position for each paper size are shown be-
low:
Metric version:
 A3: 2 - 25 mm
 B4 JIS: 2 - 40 mm
 A4: 2 - 10 mm
 11 × 17: 2 - 20 mm
8
1/2 × 14: 2-35 mm
 Inch version:
 A3: 0.1 - 1.0
 B4...

Tray Paper Settings
43
2 Tray Paper Settings
This section describes the user tools in the Tray Paper Settings menu under Sys-
tem Settings.
Default settings are shown in bold type.
❖Paper Tray Priority: Copier (copier/Document Server)
You can specify the tray to supply paper for output.
The default setting is Tray 1.
❖Paper Tray Priority: Facsimile (facsimile)
Specify the tray to supply paper for output.
The default setting is Tray 1.
When optional LCT is installed, [LCT] is displayed.
❖Paper Tray...

System Settings
44
2
❖Paper Type: Bypass Tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
The paper types you can set for the bypass tray are as follows:
No Display
Recycled Paper
 Preprinted Paper
 Special Paper
Thick Paper
 Prepunched Paper
 Colour Paper 1
 Colour Paper 2
Bond Paper
Letterhead
 Translucent Paper
Card Stock
 OHP (Transparency)
Label Paper
The default setting is No Display.
❖Paper Type: Tray 1
Sets the display so you can see what type of...

Tray Paper Settings
45
2
❖Paper Type: Tray 2, Paper Type: Tray 3
Sets the display so you can see what type of paper is loaded in each paper
tray. The print function use this information to automatically select the paper
tray.
The paper types you can set are as follows:
Paper Type
No Display
Recycled Paper
 Preprinted Paper
 Special Paper
Thick Paper
 Prepunched Paper
 Colour Paper 1
 Colour Paper 2
Bond Paper
Translucent Paper
 Letterhead
The default setting for “Paper Type” is No Display....

System Settings
46
2
Note
❒The paper guide for the LCT is fixed for A4K, 81/2×11K size paper. Con-
tact your service representative if you need to change the paper size.
❒When paper of the same type and size is loaded in two different paper trays
and you want to specify tray for 2 Sided Copy. If one of the trays is specified
as the default in Paper Tray Priority, assign 2 Sided Copy to that tray.
❒A   mark appears next to the paper tray if [Off] is selected in [Apply Auto Paper
Select].
❒[Apply Auto...

Timer Settings
47
2 Timer Settings
This section describes the user tools in the Timer Settings menu under System
Settings.
Default settings are shown in bold type.
❖Auto Off Timer
After a specified period has passed, following job completion, the machine
automatically turns off, in order to conserve energy. This function is called
“Auto Off”. The machine status after the Auto Off operation is referred to as
“Off mode”, or “Sleep mode”. For the Auto Off Timer, specify the time to
elapse before Auto Off....

System Settings
48
2
❖Printer Auto Reset Timer (printer)
Specifies the time to elapse before the printer function resets.
The time can be set from 10 to 999 seconds, using the number keys.
The default setting is On, 60 second(s).
❖Scanner Auto Reset Timer (scanner)
Specifies the time to elapse before the scanner function resets.
If [Off] is selected, the machine will not automatically switch to the user code
entry screen.
The time can be set from 10 to 999 seconds, using the number keys.
The default...

Interface Settings
49
2 Interface Settings
This section describes the user tools in the Interface Settings menu under System
Settings.
Network
This section describes the user tools in the Network menu under Interface Set-
tings.
Default settings are shown in bold type.
❖Machine IPv4 Address
Before using this machine in the network environment, you must configure
the IP address and subnet mask.
When you select [Specify], enter the [Machine IPv4 Address] and [Sub-net Mask]
as “xxx.xxx.xxx.xxx” (“x”...

System Settings
50
2
❖DDNS Configuration
You can specify the DDNS settings.
The default setting is Active.
❖Domain Name
You can specify the domain name.
The default setting is Auto-Obtain (DHCP).
Enter the domain name using not more than 63 single-byte alphanumeric
characters.
❖WINS Configuration
You can specify the WINS server settings.
If [On] is selected, enter the WINS Server IPv4 address as
“xxx.xxx.xxx.xxx”(“x” indicates a number).
If DHCP is in use, specify the [Scope ID].
Enter a [Scope ID] using...