RCA 25255re2c Manual

T-T104 (GP, 2.4V, 550mAh), 

12  
Base Station
7KHSKRQHPD\EHFRQQHFWHGWRWZROLQH5-&ZDOOMDFNVWRDFFRPPRGDWHDOOWZROLQHV
 &KRRVHDQDUHDQHDUDQHOHFWULFDORXWOHWDQGDWHOHSKRQHZDOOMDFN5-&DQGSODFH
\RXUFRUGOHVVWHOHSKRQHRQDOHYHOVXUIDFHVXFKDVDGHVNWRSRUWDEOHWRSRU\RXPD\
PRXQWLWRQWKHZDOO
 NXSSRZHULQWKHHYHQWRID
SRZHUIDLOXUH
f,QVHUWDflDWKHDGVFUHZGULYHURU VLPLODU REMHFWLQWRWKHEDWWHU\GRRUODWFKDQGJHQWO\
SU\XSZDUGWRUHOHDVHWKHEDWWHU\GRRUIURPWKHEDVH...

13
Line 1 + 2
Line 1
Line 2
 2U\RXFDQXVHWKHVLQJOHWHOHSKRQHOLQHVSOXJLQWRWKHMDFNVRQWKHEDFNRIWKH
WHOHSKRQH
 ,I\RXKDYH/LQHDQG/LQHZLUHGLQWRRQHZDOOMDFNLQ\RXUKRPHRURI

14 
  25
  &RQQHFWWKHKDQGVHWFRUG
 &RQQHFWRQHHQGRIWKHFRLOHGKDQGVHWFRUGWRWKHMDFNRQWKHVLGHRIWKHEDVHDQGWKH
RWKHUHQGLQWRWKHMDFNLQWKHKDQGVHW DQGSODFHWKHKDQGVHWLQWKHFUDGOH
Line 1
Line 2
Line 1 & 2 

15  
Programming the Phone 
Standby Screen
NOTE: The Soft keys will change according to the status of the unit .NOTE: The base LCD has a dedicated “SET CLOCK” icon  ashing when the clock 
is not set . Please go to menu “Phone Setting- Date /Time” to set the clock.
Programming Functions
NOTE: During programming, you may press the BACK Soft key (left) at any time  to exit the sub-menu and return to the main menu, or press exit key to exit programming and return to standby screen.
NOTE: If no key is pressed...

1 6
Date/Time
From the Phone Setting Menu:
VOL
2. Press  SELECT  Soft key.
3. LCD will display last-set time (or, if the device is new or has been reset to default, the  LCD will display 
    12:00AM 01/01/ 11)
4. Use the dial-pad to enter digits for the current time and date.      Note:  Use DIR/CID  button to move the cursor and the AM/PM softkey to set the time AM or PM.
5. Press  SAVE softkey to confirm the setting, a confirmation tone will indicate that your selection has been 
    saved.Date/Time...

1 7  
Dial Mode (only applicable for base)
From the Phone Setting Menu:
volDial Mode
SELECT
3.    Use the VOL (- or +) button to toggle between L1 and L2 and press  Select soft key 
       to confirm, then use the  VOL (- or +) button to scroll to Tone or Pulse.
SELECT
NOTE: The Dial mode only can be set in the base menu.
Area Code (only applicable for base)
From the Phone setting Menu:
volArea code
SELECT
SAVE.
Registration (only applicable to handset)
NOTE: If a handset has not been registered to the...

Register
From the Phone Setting Menu:
VOLRegister
SELECTRegister HS Registering....
pageabout 3 seconds
Registering
Registration complete
REGISTRATION FAILED!
Remove Handset
WARNING: It is not recommended that a handset be deregistered unless 
absolutely necessary because once a handset is deregistered, that 
handset’s telephone features cannot be used until the handset is   
re-registered.
From the Phone Setting Menu:
VOLRemove handset
SELECTRemove handset?
YESPress REG to
 initiate registration
NOTE:...

19
 
2nd Call Alert 
From the Phone Setting Menu:
VOL2ND Call Alert
SELECTVOLOn
SELECT
Handset Name (only applicable for handset)
From the Phone Setting Menu:
VOLHandset name
SELECTHandset
NOTE: If you make a mistake, press DIR/CID button to move the cursor forward 
or backward, and then use the mute/del button to backspace and delete one 
character at a time.
SAVE
Update Handset List (only applicable for base)
From the Phone Setting Menu:
volUpdate  HS List
SELECT
Display Setting
OFF
menuMENU
VOLDisplay...

20
Language
From the Display Setting Menu:
VOLLanguage
SELECT
VOLEnglish, FrancaisEspa olñEnglish
SELECT
Contrast
From the Display Setting Menu:
VOLContrast
SELECT
VOLVOL
SELECT
Backlight (only applicable for base)
From the Display Setting Menu:
volBacklight
SELECTvolAlways OnAutomatic
SELECT
Sound Setting
OFF
menuMENU
VOLSound Setting
SELECT
Ring Tone
From the Sound Setting Menu:
VOLRing Tone
SELECT
3.    Use the  VOL (- or +) button to toggle between L1 and L2 and use the  VOL (- or +) button to...