Radio Sangean U1 Operating Instruction

U1GB
F
E
NL
D
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.THE LIGHTNING
FLASH AND ARROW-
HEAD WITHIN THE
TRIANGLE IS A WARN-
ING SIGN ALERTING
YOU OF “DANGEROUS
VOLTAGE” INSIDE THE
RADIO.CAUTION: TO REDUCE THE
RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
THE BACK, NO USER SER-
VICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE PER-
SONNEL.CAUTION
  RISK OF ELECTRIC
SHOCK DO NOT OPEN
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A WARN-
ING SIGN...

1  IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with
    the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
    heat registers, stoves, or other apparatus (including amplifiers)
    that produce heat.
9. Do not defeat the safety purpose of...

2GB 10. Protect the power cord from being walked on or pinched
       particularly at plugs, convenience receptacles, and the point
       where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by
       the manufacturer, or sold with the apparatus. When a cart is
       used, use caution when moving the cart/apparatus combination
       to avoid injury from tip-over.
13. Unplug this...

3The U-1 is designed and manufactured to meet the satisfaction of
usage around the house, yard, garage, campsite and worksite.
The full range 6 1/2 inches speakers produces high quality rich
sound. The high impact cushion around the radio is made to endure
a six-feet drop and also water resistant housing provides protection
when used poolside, by the lake and outdoors.
The U-1 has been fully tested to be certain it meets Sangean quality
control standards. Please read this manual carefully before using it...

4GB (9) 9-14V DC jack for vehicle and boat power.
(10) Earphones socket.
(11) AUX IN socket.
(12) Microphone IN socket.
(13) 6 1/2 inches 15 Watts full range speaker.
(14) AC wire compartment.
(15) High sensitivity, excellent sound performance. 

5 

6GB   Controls
     Power and AM/FM/AUX IN band selector
     Tuning LED indicator
     Volume Control
     AUX/FM band indicator
     DC IN (9-14V) socket for vehicle and boat power
     LED light
     AUX IN socket
     Open to AC cord compartment
     AM band /Microphone indicator
     Soft and bendable spring antennaTuning Control
Battery Compartment
LED illuminator switch
Microphone socket
Headphones socket
Loudspeaker
Carrying Handle
Dial scale345678910111213141516171821 

7  Power the radio
1. Battery operation
Installing the batteries, first turn battery cover fixture anti-clockwise to
loosen and put down the battery cover. Insert 6 x D size ( UM-1 )
battery into the compartment. Ensure the battery is inserted in
accordance with the diagram shown.
Close the battery cover and fasten the fixture by turning clockwise.
If the radio is not to be used for any extended period of time, it is
recommended that the battery is removed from the radio.
2. AC operation
Before you plug...

8GB   Operating your radio FM
1. Turn on the radio by switching the Power knob to FM position.
    The FM band indicator will be lit on.
2. Rotate the Tuning Control to select the desired station.
    On FM, the tuning scale is marked in MHz ( Megahertz ).
    The Tuning LED will be lit on, if the radio station has been
    correctly tuned.
3. Adjust the Volume Control for comfortable listening.
4. To switch off the radio, turn the Power knob to OFF position.
5. The soft spring antenna is used for FM...

9  Headphones socket
You can use a stereo or mono headphones set with a 3.5 mm plug
for listening radio program via headphones. When you insert the
headphones plug, the speaker is disconnected. This is a mono type
radio, sound from the headphones set will be all in mono even if you
apply a stereo headphones set.
  AUX IN socket
Switch the Band selector to AUX. position, the Aux. band indicator is
lit on. Connect a stereo or mono audio source ( like CD walkman ) to
this input to listen the audio program...