Quasar Colorvideo Projection System Sr 5144e Operating Instructions

							10
DOLBY CENTER CHANNEL INPUT CONNECTION
Dolby Center Channel Input Connection
Your PTV can be configured to use the PTV speakers as center channel speakers in 
Dolby* surround sound transmission.  Connect a Dolby surround amplifier to CENTER 
CHANNEL INPUT on the back of the PTV as shown.  DOLBY CENTER MODE & FIXED 
AUDIO OUT must be selected in the AUDIO Roller Guide
™** menu under SPEAKERS. 
COMPONENT VI DEO I NPUT
PRPBY
VI DEO RLAUDI O
RL
TO AUDI O AMP
ANT 2
SPLI T
OUT
ANT 1
CENTER CHANNEL I NPUT
12 Ohms 50W (DIN) MAX
2 1
INPUT 1 S- VI DEO VI DEO
PROG.
OUT R- AUDI O- L
INPUT 2
INPUT 3
PTV
  From Center     
Channel Output
TERMINALS ON BACK OF PTV
        Dolby Surround 
AMPLIFIER
CENTER CHANNEL INPUT
(1) Push and hold down button. 
(2) Insert bare wire into terminal 
      and release button.
VCR
Video Component
  PTV Speakers 
Center ChannelRight Front  
Speaker Left Front 
Speaker
      Left Rear 
Surround Speaker    Right Rear 
Surround Speaker
S-
VIDEO
VIDEO
AUDIO
L
R VIDEO
Y
P
B
PR
PROG 
OUTTO 
         AMPL
RINPUT 
1INPUT 
2INPUT 
3 COMPONENT ANT 1
ANT 2 SPLIT OUT
CENTER 12   50 WATTS (DIN) MAX.W
12 CHANNEL 
INPUT
AUDIO
   VIDEO INPUTS
PTV
  From Center     
Channel Output
        Dolby Surround 
AMPLIFIER
CENTER CHANNEL INPUT
(1) Push and hold down button. 
(2) Insert bare wire into terminal 
      and release button.
VCR
CONNECTIONS ON BACK OF TV
  PTV Speakers 
Center ChannelRight Front  
Speaker Left Front 
Speaker
      Left Rear 
Surround Speaker    Right Rear 
Surround Speaker
Video Component
*”Dolby” and “Pro-logic” are the trademarks of Dolby Laboratories Licensing Corporation.
**U.S. Patent Pending 
						

							11
PICTURE IN PICTURE (PIP) OPERATION
Picture In Picture (PIP) Operation
This television includes a two tuner Picture In Picture (PIP) feature.  This allows
watching two (2) live broadcasts at the same time without or with an external video
source (VCR).
Basic PIP Operation
Procedure
Press the PIP button on the remote control to display the PIP frame onscreen.
Note:The audio is for the Main Picture only.
1. Choose channels for the PIP frame by pressing the remote control PIP CHANNEL up/
down buttons.
2. Choose channels for the 
Main Picture by pressing the remote control CH up/down
buttons or by using the numeric keypad.
PIP Operation with a Cable Box 
Procedure
rTo view premium (scrambled) cable channels through your cable box in the Main Picture:
Note:Use this procedure if you want to watch premium cable channels in the Main Picture while
viewing a television program or video in the PIP frame. 
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune television to Channel 3.
3. Press the PIP button on the remote control to display the 
PIP frame onscreen.
Note:The audio is for the Main Picture only.
4. Verify the cable box is ON.
5. Choose channels for the 
Main Picture by tuning the cable box. 
6. Choose channels for the 
PIP frame by pressing the TV button on the remote control
and using the PIP CHANNEL up/down buttons.
Note:Swap is not available when using the cable box to tune channels. If your cable box has a video
output, it can be connected to the television to allow you to use all PIP functions.  See the
equipment manual for more information. (Tune the PIP to the video input connected to the cable
box).
   SWAP Button
The SWAP button switches the PIP and Main
Picture source.  Press the RECALL button for
onscreen PIP and Main Picture source status. 
						

							12
SPLIT SCREEN OPERATION
Split Screen Operation
This feature lets you watch two different channels side by side with or without an external video
source. The audio is from the Main picture only (left side). 
  
Basic SPLIT Operation
Procedure
Press the   button on the remote control to display the SPLIT screen.
Note:The audio is from the Main Picture only.
1. Choose channels for the SPLIT Picture by pressing the remote control PIP CHANNEL
up/down buttons.
2. Choose channels for the 
Main Picture by pressing the remote control CH up/down
buttons or by using the numeric keypad.
3. The SWAP button switches the SPLIT and MAIN Picture source. Press RECALL
button for onscreen SPLIT and Main Picture source status.
        MAIN           SPLIT 
SPLIT/SIZEPLAY 
						

							13
DIGITAL TV - SET-TOP BOX (DTV-STB) OR DVD CONNECTION
Digital TV - Set-Top Box (DTV-STB) or DVD Connection
Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) or DVD
to the back of your PTV.
Note:There are 2 sets of three video inputs, Y, PB, and PR.  Separate component color
inputs provide luminance and color separation.  Use the L (left) and R (right) audio
inputs.
S-
VIDEO
VIDEO
AUDIO
L
R VIDEO
Y
P
B
PR
PROG 
OUTTO 
         AMPL
RINPUT 
1INPUT 
2INPUT 
3 COMPONENT ANT 1
ANT 2 SPLIT OUT
CENTER 12   50 WATTS (DIN) MAX.W
12 CHANNEL 
INPUT
AUDIO
   VIDEO INPUTS
DIGITAL  TV OUTPUT
PRPBYMAIN 
VIDEO
NTSC  OUTPUT
R-AUDIO-L
S-VIDEOL-AUDIO-R
-VIDEO
CONPONENT INPUT TERMINALS ON BACK OF TV TERMINALS ON BACK OF DTV-STB OR DVD PLAYER
CABLES NOT SUPPLIED 
						

							14
ROLLER GUIDE MENU NAVIGATION
Roller Guide Menu Navigation
Procedure
1. Press the ACTION button in the middle of the large blue button on the Remote Control
to display the Roller Guide Menu.  
2. Press the CH up/down to rotate the Roller Guide to the desired feature.
3. Press the ACTION button to display main menus and submenus.  
4. Press the CH up/down buttons to highlight desired main menu feature. 
5. Press the VOL right button to enter submenus.
6. Press the CH up/down buttons to highlight desired submenu feature.
7. Press the VOL right/left button to select or adjust feature.
8. Press the ACTION button twice to return to the Roller Guide Menu. 
9. To exit the Roller Guide Menu, press the  VOL left button.
Note: Be careful to press ACTION in the middle of the button.  If you do not press in the
middle of the button, the (CH) channel or (VOL) volume keys may be activated.
Remote Control Guide
The Remote Control Quick Reference Guide is located within the package provided
with this PTV.
ROLLER GUIDE MENU SELECTIONS
Remote ACTION / Navigation Button
p
q tu
VOL VOLCH
CH ACTION 
						

							15
ROLLER GUIDE FEATURE CHART
Roller Guide Feature Chart
MENUDESCRIPTION
SET UP
LANGUAGESrSelect English, Spanish, or French menu.
PROG. CHAN
(Program Channels)
rMODE - Select Cable or TV. See
Installation section in manual.
rANTENNA  -  Select ANT 1 or ANT 2.
rAUTO PROGRAM - Automatically program
channels having a signal into memory. 
rMANUAL PROGRAM - Manually add or
delete channels from memory. 
(Closed Captioning)
rCC ON MUTE -  Activate C1-C4 for Closed
Captioning display when the remote MUTE
button is pressed. 
rCC MODE - Select T1-T4 or C1-C4 for
Closed Captioning, program guides and
other information.
OTHER ADJ.
rAUTO POWER ON - Select SET to power
up the TV at the same time as the Cable
Box or other components or select OFF.
rCONVERGENCE 1 - Adjustment may be
required when the PTV is moved because
of the effects of the Earth’s magnetic field
on the projection tubes.
rCONVERGENCE 2 - Adjustment may be
required after setting Convegence 1. 
 AUDIO
AUDIO ADJ.
 (Adjustments)
rMODE - Select STEREO, SAP (Second
Audio Program) or MONO. (Use MONO
when stereo signal is weak.)
rBASS - Increase or decrease the bass
response.
rTREBLE - Increase or decrease the treble
response.
rBALANCE - Emphasize the left/right
speaker volume.
rNORMAL - Reset BASS, TREBLE and
BALANCE to factory default.
CC 
						

							16
ROLLER GUIDE FEATURE CHART
OTHER ADJ. 
(Adjustments)
rAI SOUND -  Automatically adjust volume
to maintain a comfortable listening level.
(AI sound is not available in VIDEO mode).
rBBE - Sound technology enhances speech
intelligibility and restores the dynamic
range of musical passages to provide
outstanding natural sound.
 SURROUNDrMODE - Enhances audio response when
listening to stereo.
 SPEAKERS
rON - PTV speakers operate normally.
rOFF & VARIABLE AUDIO OUT - 
PTV speakers off - audio adjustable by
PTV.
rOFF & FIXED AUDIO OUT - 
PTV speakers off — audio adjustable only
by the external amplifier.
rDOLBY CENTER MODE & FIXED AUDIO
OUT - PTV speakers provide center
speakers for Dolby sound transmission
available on video or laser disc.  (See
Installation section in manual.)
TIMER
CLOCK SET
rSet the time and the day of the week.
(Time will display onscreen after turning on
the television, pressing the RECALL button
or changing channels).
SLEEPrSet timer to turn off PTV in 30, 60 or
90 minutes.  Select NO to turn timer off.
TIMER 1
TIMER 2rSet one or both timers to automatically turn
television on and off at selected times, on
selected channels, and on selected days.
(Clock must be set to use Timer features).
Roller Guide Feature Chart (Cont.)
MENUDESCRIPTION 
						

							17
ROLLER GUIDE FEATURE CHART
PICTURE
VIDEO ADJ1
(Adjustments)
rCOLOR - Adjust desired color intensity.
rTINT - Adjust natural flesh tones.
rBRIGHTNESS - Adjust dark areas for crisp
detail.
rPICTURE - Adjust white areas of picture.
rSHARPNESS - Adjust clarity of outline
detail.
rNORMAL- Reset all picture adjustments to
factory default settings.
VIDEO ADJ2
(Adjustments)
rCOLOR TEMP NORMAL - Adjust white
balance to COOL (blue), WARM (red) or
NORMAL.
rNATURAL COLOR - Expands the color
reproduction range resulting in vivid
pictures with natural color gradation and
highly delicate hues.
rVIDEO NR - Reduces noise in the channel,
commonly called snow.  Remains off when
receiving strong signal.
r3D Y/C FILTER - Minimize noise and cross
color in the picture.
rASPECT - Select 16:9 or 4:3 with 1080i
input signal from STB.
OTHER ADJ
(Adjustments)
rSCAN MODE - Picture adjustment when
switching between video games and DTV,
if needed. 
rCOLOR MATRIX - Select HD or SD to
automatically adjust color parameters for
HD (high definition and SD (standard
definition) transmissions.
Roller Guide Feature Chart (Cont.)
MENUDESCRIPTION 
						

							18
ROLLER GUIDE FEATURE CHART
CHANNELS
FAV O R I TE S
rCHANNEL SCAN - Select FAV (16
favorites) or ALL channels to scan
channels using the up/down CH buttons.
CAPTION
rPRESET CAPTION - Enter channel
numbers for preset captions.
rMANUAL CAPTION - Enter channel
numbers and captions manually.
rINPUT LABEL - Label video connections
for onscreen display of optional equipment.
Note:This receiver has a video input skip feature,
which will allow the user to skip Input
modes when pressing TV/VIDEO button.  
LOCK
MODE
rLock All, Channels or Game with a secret
code.
Note:For more information about Block
Programs, see the V-CHIP Parental Lock
manual provided with the TV package.
HOW LONG?rSelect the period of time (12, 24, 48 hours
or ALWAYS) for your option to be locked.
Roller Guide Feature Chart (Cont.)
MENUDESCRIPTION 
						

							19
SPECIAL FEATURES
Special Features
SET UP
Prog Chan (Program Channels)
In SET UP menu under PROG CHAN select:
rMODE to select TV (antenna) or CABLE mode depending on the signal source.
rANTENNA to select either ANT1 or ANT2. 
rAUTO PROGRAM to automatically program all channels with a signal.
rMANUAL PROGRAM to manually add or delete channels.    
  (Closed Captioning)
This television contains a built-in decoder that displays   (Closed Captioned) text across the
screen (white or colored letters on black background).  It allows the viewer to read the dialogue of a
television program or other information. The program viewed must include Close Captioning for the
feature to work.    
 Mode
rIn SET UP Menu, select   (Closed Caption).
rSelect  MODE.
rSelect OFF, C1, C2, T1, T2, C3, C4, T3 or T4:
• OFF - When Closed Caption is not desired.
• C1 - For video related information to be displayed, up to 4 lines onscreen at a time.  (It
does not block relevant parts of the picture).  Text may be in any language.
• C2 to C4 - For other modes of video related information.
• T1 - For program guide and other information to be displayed, when available.
(Blocks a large portion of the picture on the television screen).
• T2 to T4 - For other modes of information.  (Blocks a large portion of the picture on the
television screen).
rPress ACTION to return to submenu options, and exit menus.
 On Mute
Activates the onscreen Closed Caption feature when the MUTE button on the remote control is
pressed.              
Note:This feature only functions when the Closed Caption Mode is OFF. The program being
viewed must be broadcast with Closed Captioning. (Refer to your local TV guide). 
rIn SET UP Menu, select   (Closed Caption).
rSelect NO, C1, C2, C3, or C4.
rRecommended set up for Closed Caption when using the MUTE button:
• ON MUTE: C1
• MODE: OFF
rPress ACTION to return to submenu options,  and exit menus.
MODE             CABLE
ANTENNA ANT1
AUTO PROGRAM
MANUAL PROGRAM
   
IDIOMA/     
LANGUE    
PROG CHAN
CC
OTHER ADJ.
CC
CC
CC
CC
CC
CC
CC
CC
CC