Projector LG Minibeam User Manual

							31USING	THE	PROJECTOR
USING	THE	PROJECTOR
Connecting	to	an	Antenna	or	Cable
To watch TV using an indoor/outdoor antenna, connect a wall terminal and the  port of the Projector using an RF cable (75 Ω).
You can watch terrestrial or cable (analog or digital) TV.
(The RF cable is sold separately.)
•	Make sure not to bend the copper wire of the RF cable (75 Ω). Turn 
the input jack to the right to fasten it.
Copper wire
•	 Ensure you use a standard coaxial cable (75 Ω, sold separately) 
when connecting to the projector input.
•	 For better image quality in locations where signal strength is low, 
purchase and install a signal amplifier (booster).
•	 A signal splitter is required if you want to use two or more projectors 
through one antenna.
•	 If you have any problems when installing the antenna, please consult 
a suitable retailer or the store where you purchased the antenna.
NOTE  
						

							32USING	THE	PROJECTOR
Watching	Projector
Turning	on	the	Projector
The menu screen display in this owner's manual is an example to help users understand how to operate the product and may look different from the actual screen.
1 Connect the power cord correctly.
2 After waiting for a moment, press the POWER button on the remote control or the joystick button.
3 In the Language Selection screen, select a language.
003A0028002F002600320030002800040037004B00440051004E0003005C0052005800030049
00360057
English
Español
Français 
한국어 
 Next
4 In the Mode	Setting screen, select the setting mode you want.
00360057
00360048004F004800460057
0026004B005200520056004800030057
00360048004F0048004600570003003E00360057
004600440051000300440047004D005800560057
00500048005100580003005200530057
	Confirm	 Previous
00360057 00360057
00270048005000520003003000520047004800320049
* 	 Store	Demo is used when displaying the product in-store. The picture mode is automatically reset after a certain period of time. You can sele\
ct 
Standard to use the product at home.
   
						

							33USING	THE	PROJECTOR
5 In the Time	Zone screen, select Time	Zone region and Daylight	Saving	option.
0036005700030016001100030037004C005000480003003D005200510048
0037004C005000480003003D005200510048 0028004400560057
00270044005C004F004C004A004B0057 0024005800570052
 Confirm Previous
6 Select an input signal by using the INPUT button on the remote control.
002C0051005300580057
00370039 0024003900260052005000530052005100480051005700360026003500280028003100030036002B003800360025 0035002A0025001000330026
1BD20003003000520059004800031BD900030032002E
0028005B004C0057
002C0051005300580057
002B00270030002C  
						

							34USING	THE	PROJECTOR
Focus	of	the	Screen	Image
When an image appears on the screen, check if it is in focus and fits the screen properly.
Adjust the focus of the image by rotating the Focus Ring to the left or \
right.
Make sure the product does not move when adjusting the focus.
Focus Ring
Watching	Projector
1 In standby mode, press the POWER button to turn the projector on.
2 Press the INPUT button and select the input signal you want.
3 Control the projector using the following buttons while watching projector.
ButtonDescription
CH	,Changes the TV channel.
LISTDisplays the channel list.
Number	buttonsEnters a number.
VOL	+,	-Adjusts the volume level.
MUTE	Mutes all sounds.
Q.MENUAccesses the quick menu. (See page 44.)
FLASHBKDisplays the channel you were watching previously.
4 To turn the projector off, press the POWER button.  
						

							35USING	THE	PROJECTOR
To	Set	Channel
Image shown may differ from your projector.
Memorizing	the	Available	Channels
Using	the	Auto	Tuning	function
Saves a channel which is currently broadcasting. Be sure to activate Aut\
o Tuning when you move to a new home or change the position of your projector. When you activate this function, make sure that the antenna i\
s connected and there are channels broadcasting signals.
1 Press the SETTINGS button.
2 Press the , , , or  button to select CHANNEL and press the OK button.
3 Press the ,  button to select Auto	Tuning and press the OK button.
4 Select Start to start automatic tuning. The projector scans and saves available channels automatically.
5 When you are finished, press the EXIT button.  
						

							36USING	THE	PROJECTOR
Memorizing	or	Deleting	Channels	Manually
1 Press the SETTINGS button.
2 Press the , , , or  button to select CHANNEL and press the OK button.
3 Press the  or  button to select Manual	Tuning and press the OK button.
4 Scroll through the channel types, and then add or delete channels.
5 When you are finished, press the EXIT button.
•	If Lock	System is turned on, a pop-up window will appear asking for 
password.
•	 You can store up to 1000 Channels. The number of channels 
that you can store differs depending on the broadcasting signal 
environment.
•	 Auto	Tuning memorizes the Channels that are currently being 
broadcast. 
•	 The channels are stored in the order of DTV, TV, Cable DTV, and 
Cable TV.
NOTE  
						

							37USING	THE	PROJECTOR
Editing	Your	Channel	List
1 Press the SETTINGS button.
2 Press the , , , or  button to select CHANNEL and press the OK button.
3 Press the  or  button to select Channel	Edit and press the OK button.
4 Edit channels using the following buttons.
0026004B0044005100510048004F000300280047004C005700240051005700330044004A0048000300140012
001600100014 001800100014001A00100014
002700370039
00370039002600440045004F00480003002700370039 002600440045004F0048000300370039
0003002400470047001200030025004F00520046004E0012 1C46000300290044005900520055004C0057
1BD200030030005200590048000300031BD900030032002E
ButtonDescription
RedAdds or deletes a channel.
GreenBlock or unblock a channel.
FAVAdds a favorite channel.
5 When you are finished, press the EXIT button.  
						

							38USING	THE	PROJECTOR
Favorite	Channel	Setup
1 Press the SETTINGS button.
2 Press the , , , or  button to select CHANNEL and press the OK button.
3 Press the  or  button to select Channel	Edit and press the OK button.
4 Move to your desired channel.
5 Press the FAV button to access the Set	as	Favorite. 
6 Press the  or  buttons to scrolls through channel group.
7 Press the OK button.
Set	as	Favorite
Select a favorite channel group.
Multiple selection is available.
Group AGroup B
Group C
Group D
0032002E00260044005100460048004F  
						

							39USING	THE	PROJECTOR
Additional	Options
Adjusting	Aspect	Ratio
•	Resize an image to view at its optimal size by pressing RATIO while you are using the projector.
•	Available picture size may differ depending on the input signal.
•	 You can also use the Q.MENU or SETTINGS button.
NOTE
MenuDescription
16:9Resizes images to the 16:9 ratio.
FullChanges to the full screen regardless of the aspect ratio.
Just	ScanDisplays video images in the original size without removing parts of the edge of the image.
•	If you select Just	Scan, you may see image noises at the edge or edges of the screen.
Set	By 	ProgramDisplays images in the same aspect ratio as the original image.
4:3Resizes images to the previous standard 4:3.
ZoomResizes the image to fit the screen width. The top and bottom parts of the image may be cut off.
Press the , or  button to zoom in or out of the image.
Press the , or  button to move the image.
Cinema 	Zoom	1Formats an image to the cinemascope ratio, 2.35:1. It ranges from 1 to 16.
Press the , or  button to zoom in or out of the image.
Press the , or  button to move the image.
•	If you enlarge or reduce an image, the image may be distorted.  
						

							40USING	THE	PROJECTOR
Using	the	Keystone	Function
To prevent the screen image from becoming trapezoidal, Keystone adjusts the top and bottom width of the image if the projector is not se\
t up at a right angle to the screen.
Because the Keystone function may cause inferior screen image quality, use this function only when it is not possible to set up the projector a\
t an optimal angle.
06120003002E0048005C0056005700030003000300030013070100100003 000E06FD
	OK
1 Press the Key's	, or Key's	, button to adjust the picture.
•	Keystone can be adjusted from -40 to 40.
2 Press the OK button when done.