Projector LG Minibeam User Manual
Have a look at the manual Projector LG Minibeam User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11SAFETY INSTRUCTIONS • Do not touch the lens; doing so can result in burns or damage to lens. Lens and unit may be HOT during and immediately after use. Use caution when handling unit, allowing for proper cool down. • Only use a grounded electrical outlet. (Except for devices which are not grounded.) • Do not insert anything into or cover up the exhaust vents. -This may result in fire or electric shock. • Follow all maintenance guidelines for optimal use; service only at an authorized service center. • Lamp contains mercury and as such must be disposed of according to local, state, and federal laws (not applicable on LED models). • Keep the batteries and remote out of reach of children. -This will prevent personal injury or damage to the product. CAUTION • Do not use or store the projector outdoors for long periods of time. • Do not mix new batteries with old ones. -Burst or leaking batteries may result in damage or injury. • Be sure to unplug if the projector is not to be used for a long period. -Accumulated dust may result in fire or electric shock due to overheating, ignition, or poor insulation. • Only use the specified type of battery. -Burst or leaking batteries may result in damage or injury. • Make sure you use the same type of battery when replacing. -In the case of a battery contact failure, the battery may drain quickly or the remote control may not work properly. • Dispose of used batteries properly. -This may result in explosion or fire. The correct method of disposal may vary depending on your country or region.
12SAFETY INSTRUCTIONS • Do not throw or disassemble the battery. -This may result in fire or explosion due to damage to the battery. • Store batteries away from metallic objects, such as keys and paper clips. -Excess current may cause a rapid increase in temperature, resulting in fire or burns. • Do not store the batteries near any heat source, such as a heater. -This may result in fire or damage to the product. • Do not store batteries at temperatures higher than 60 °C or in high humidity. -This may result in explosion or fire. • Make sure that the battery is installed correctly. -This prevent explosion or fire. • Incorrect battery replacement may cause fire. Risk Group 2 CAUTION Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. May be harmful to the eye. ANTENNA Outdoor Antenna Grounding • If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.
13SAFETY INSTRUCTIONS Antenna grounding according to the National Electrical Code, ANSI/NFPA 70 Antenna Lead in Wire Grounding Conductor (NEC Section 810-21) Antenna Discharge Unit (NEC Section 810-20) Power Service GroundingElectrode System (NEC Art 250, Part H) NEC: National Electrical Code Ground Clamp Electric Service Equipment Ground Clamp For USA NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820 - 40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
14SAFETY INSTRUCTIONS CONTENTS LICENSE 2 SAFETY INSTRUCTIONS 3 PREPARATION 16 Accessories 16 Optional Extras 18 Parts and Components 19 Using the Joystick Button 21 -Basic Functions 21 -Adjusting the Menu 22 Projector Status Indicators 22 Installation 23 -Installation Precautions 23 -Projection Distance per Screen Size 24 -How to Install the Projector On a Tripod 26 -Kensington Security System 27 REMOTE CONTROL 28 USING THE PROJECTOR 31 Connecting to an Antenna or Cable 31 Watching Projector 32 -Turning on the Projector 32 -Focus of the Screen Image 34 -Watching Projector 34 To Set Channel 35 -Memorizing the Available Channels 35 Additional Options 39 -Adjusting Aspect Ratio 39 -Using the Keystone Function 40 -Changing Input Device 41 -Blank Function 43 Using the Quick Menu 44 ENTERTAINMENT 45 Using SCREEN SHARE 45 Setting Up Bluetooth on the Projector 46 -Searching for Bluetooth Devices and Connecting 47 -Connecting, Disconnecting, or Deleting Bluetooth Devices in the List of registered devices 49 -Adjusting AV Sync. Adjust 50 MY MEDIA 51 Before Using 51 -Connecting a USB Device 51 -Removing a USB Device 51 To Use My Media 53 -Watching the Videos 57 -Viewing the Photos 63 -Listening to Music 67 -Viewing Files 71
15SAFETY INSTRUCTIONS 3D FUNCTION 75 While Watching 3D 75 Requirements for Watching 3D Images 79 -Using the DLP-LINK (DLP- Ready) Type Glasses 80 To view 3D images 80 -Supported 3D Mode 81 CUSTOMIZING SETTINGS 82 SETTINGS 82 PICTURE Settings 83 AUDIO Settings 90 CHANNEL Settings 92 TIME Settings 93 WIRELESS Settings 95 LOCK Settings 97 OPTION 1 Settings 101 OPTION 2 Settings 104 CONNECTING DEVICES 106 Connecting to HD Receiver, DVD, VCR Player, or External Devices 107 -HDMI Connection 107 -HDMI to DVI Connection 107 -Composite (AV) Connection 108 -Component Connection 108 Connecting a PC 109 -HDMI Connection 109 -HDMI to DVI Connection 109 -RGB Connection 110 Connecting a Laptop 111 -HDMI Connection 111 Connecting to Headphones 112 Using the Mirroring Function of a Mobile Phone 113 -MHL/Slimport Connection 113 MAINTENANCE 114 Cleaning 114 -Cleaning the Lens 114 -Cleaning the Projector Case 114 SPECIFICATIONS 115 KEY CODES 119 EXTERNAL CONTROL DEVICE SETUP 121 Communication Parameters 122 Command reference list 122 Transmission / Receiving Protocol 123
16PREPARATION PREPARATION Accessories Accessories included with the projector are show below. The pictures may differ slightly from the actual product. Accessories are subject to change without prior notice. New accessories may be added or old ones removed. Remote Control Two AAA BatteriesOwner's ManualOwner's Manual CD AC-DC AdaptorComposite GenderPower Cord Pouch
17PREPARATION • When connecting an HDMI or USB cable, or connecting a USB flash drive to the HDMI or USB port, use a product that has a width of 18 mm or less and a height of 10 mm or less. If the USB cable or USB flash drive does not fit the USB ports of the projector, use an extension cable that supports USB 2.0. • Use a certified cable with the HDMI logo attached. • If you do not use a certified HDMI cable, the screen may not display or \ a connection error may occur. (Recommended HDMI cable types) - High-Speed HDMI®/™ Cable - High-Speed HDMI®/™ Cable with Ethernet
18PREPARATION Optional Extras To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where you purchased the produc\ t. Optional accessories are subject to change without prior notice. Projection ScreenTripodHDMI Cable Video CableAudio Cable 3D glasses (DLP-LINK or DLP-Ready Type) RGB to Component cableComponent CableMHL or Slimport cable Computer CableRF Cable
19PREPARATION Parts and Components The projector is manufactured using high-precision technology. You may, however, see tiny black dots and/or bright colored dots (red, blue, or green) that continuously appear on the projector screen. This is a norm\ al result of the manufacturing process and does not indicate a malfunction.\ Lens2)Vent1) Speaker Focus ring Joystick button 1) Due to the high temperature of the vent area, do not get close to the vent area. 2) Do not touch the lens when using the projector. The lens may be damaged. Speaker Vent1)
20PREPARATION RS-232C IN 1 2 3 4 5 6 7 8 1 RS-232C IN Port 2 (USB Port) 3 Port 4 Port 5 RGB IN Port 6 (Headphone Port) 7 AV IN Port 8 DC IN Port