Projector LG Minibeam User Manual

Owner's Manual
LG Minibeam 
DLP Projector
Please read the safety information carefully before using this product.
www.lg.com
PW1500
PW1000  

2LICENSE
LICENSE
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
This DivX Certified® device has passed rigorous
testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your
device at vod.divx.com. Find your registration
code in the DivX VOD section of your device setup
menu.
DivX Certified® to play DivX® video...

3SAFETY	INSTRUCTIONS
SAFETY	INSTRUCTIONS
Please take note of the safety instructions to prevent any potential acc\
ident or misuse of the projector.
•	Safety precautions are given in two forms, i.e. WARNING and CAUTION as detailed below. WARNING  Failure to follow the instructions may cause serious injury and even death.  CAUTION  Failure to follow the instructions may cause injury to persons or damage to the product.
•	Read the owner’s manual carefully and keep it on hand.
WARNING/CAUTIONRISK OF...

4SAFETY	INSTRUCTIONS
•	Do not allow children to cling to or climb up to the projector. -This may cause the projector to fall, causing injury or death.
•	Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a closet) or on a carpet or cushion. -This may result in fire due to the increase in internal temperature.
•	Do not place the product close to sources of steam, oil or oil mist, such as humidifiers and kitchen counters. -Failure to do so may result in fire, electric...

5SAFETY	INSTRUCTIONS
Power
	WARNING
•	DISCONNECTING THE DEVICE FROM THE MAIN POWER  -The Power plug is the disconnecting device.  In case of an emergency, the Power Plug must remain readily accessible. 
•	The grounding wire should be connected. (Except for devices which are not grounded.) -Ensure that you connect the grounding cable to avoid electric shock. 
If it is not possible to ground the unit, have a qualified electrician install a separate circuit breaker. Do not try to ground the projector by...

6SAFETY	INSTRUCTIONS
	CAUTION
•	Always grab the plug to remove the AC adapter or power cord. -Otherwise, this may result in a fire or may damage the product.
•	Refrain from constantly bending the power cord of the AC adapter. -If the power cord is bent excessively for a long period of time, the cord may break inside. This may result in a fire or electric shock.
•	Ensure the power cord and plug are not damaged, modified, severely bent, twisted, pulled, 
sandwiched or hot. Do not use the product if the...

7SAFETY	INSTRUCTIONS
•	Never disassemble the power supply devices (AC adapter/power cord, etc.). -This may damage the power cord and result in a fire or electric shock.
•	Connect the AC adapter and the power cord firmly. -Not doing so may result in a product failure or fire.
•	Do not place heavy objects or put pressure on the power cord and AC adapter and avoid damage. -This may result in a fire or may damage the product.
•	Always use the AC adapter provided or any AC adapters approved and certified by...

8SAFETY	INSTRUCTIONS
•	Do not look directly into the lens when the projector is in use. -The bright light may damage your eyes.
•	When the lamp is on or has just been turned off, avoid touching the air vent or lamp, because these will be very hot.
•	If there is a gas leak in the room with the projector, do not touch the projector or power outlet. Open the windows for ventilation. -Sparks may cause fire or  burns.
•	Unplug the power cord from the outlet during a lightning storm.  -This will prevent shock...

9SAFETY	INSTRUCTIONS
•	It is recommended that you maintain a distance of more than 5 to 7 times the diagonal length of the screen. -If you watch the screen at a close distance for a long time, your eye sight may become worse.
•	Do not block the light beam emitted from the projector using a book or other object. -Lengthy exposure to the projector beam may result in fire. In addition, the lens may be overheated and damaged by the reflected heat. 
•	Do not start the projector with the volume turned up high....

10SAFETY	INSTRUCTIONS
	CAUTION
•	Contact your seller or our service center once a year to clean the internal parts of the projector. -If you do not clean the projector for a long period of time, dust will accumulate, which may result in fire or damage to the projector.
•	When cleaning plastic parts such as the projector case, unplug the power first and wipe with a soft cloth. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, automobile or industrial polish, abrasives, wax,...