Planar Pr9030 Projector User Manual

							49
OPTION Menu
OPTION Menu (continued)
ItemDescription
SECURITY This projector is equipped with security functions.
User registration is required before using the security functions.
Please contact your local dealer.
1. Using Security Features
1.1 Inputting the PASSWORD
1.1-1  
Use the ▲/▼ buttons on the OPTION 
Menu to select SECURITY and press the ► 
button. The ENTER PASSWORD box will be 
displayed. The factory default PASSWORD is 
9503. This PASSWORD can be changed (1.2 
Changing the PASSWORD). 
• It is strongly recommended the factory default 
PASSWORD to be changed as soon as possible.
1.1-2   Use the ▲/▼/◄/► buttons to enter the 
registered PASSWORD. Move the cursor to 
the right side of the ENTER PASSWORD 
BOX and press the ► button to display the 
SECURITY menu. If an incorrect PASSWORD 
is input, the ENTER PASSWORD BOX will 
be displayed again. If incorrect PASSWORD 
is input 3 times, the projector will turn off. 
Afterwards the projector will turn off every time 
an incorrect PASSWORD is input.
1.2 Changing the PASSWORD
1.2-1  Use the ▲/▼ buttons on the SECURITY menu 
to select SECURITY PASSWORD CHANGE 
and press the ► button to display the ENTER 
NEW PASSWORD BOX.
1.2-2   Use the ▲/▼/◄/► buttons to enter the new 
PASSWORD.
1.2-3   Move the cursor to the right side of the 
ENTER NEW PASSWORD BOX and press 
the ► button to display the NEW PASSWORD 
AGAIN BOX, enter the same PASSWORD 
again. 
1.2-4   Move the cursor to the right side of the NEW 
PASSWORD AGAIN BOX and press the ► 
button and the NOTE NEW PASSWORD BOX 
will be displayed for about 20 seconds, please 
make note of the PASSWORD during this time. 
Pressing the 
ENTER button on the remote 
control or INPUT  button on the projector will 
close the NOTE NEW PASSWORD BOX.
• Please do not forget your PASSWORD.
ENTER PASSWORD  BOX
SECURITY menu
ENTER NEW 
PASSWORD BOX
NEW PASSWORD  AGAIN BOX
NOTE NEW 
PASSWORD BOX
(continued on next page) 
						

							50
OPTION Menu
OPTION Menu (continued)
ItemDescription
SECURITY
(continued) 1.3 If you have forgotten your PASSWORD
1.3-1  
Follow the procedure in 1.1-1 to display the 
ENTER PASSWORD BOX.
1.3-2   While the ENTER PASSWORD BOX is 
displayed, press and hold the 
RESET  button 
on the remote control for about 3 seconds 
or press and hold the 
INPUT  button for 3 
seconds while pressing the ► button on the 
projector. 
The 10 digit Inquiring Code will be displayed.
• If there is no key input for about 55 seconds while 
the Inquiring Code is displayed, the menu will close. 
If necessary, repeat the process from 1.3-1.
1.3-3   Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD 
will be sent after your user registration information is confirmed.
2. Using the MyScreen PASSWORD Function
The MyScreen PASSWORD function can be used to prohibit access to the 
MyScreen function and prevent the currently registered MyScreen image 
from being overwritten.
2.1 Turning on the MyScreen PASSWORD 
Function
2.1-1   Use the ▲/▼ buttons on the SECURITY 
menu to select MyScreen PASSWORD and 
press the ► button to display the MyScreen 
PASSWORD on/off menu.
2.2 Setting the PASSWORD
2.2-1  Display the MyScreen on/off menu using the 
procedure in 2.1-1.
2.2-2   Use the ▲/▼ buttons on the MyScreen 
PASSWORD on/off menu to select TURN ON. 
The ENTER PASSWORD BOX (small) will be 
displayed.
2.2-3   Use the ▲/▼/◄/► buttons to enter the 
PASSWORD. Move the cursor to the right side 
of the ENTER PASSWORD BOX (small) and 
press the ► button to display the PASSWORD 
AGAIN BOX, enter the same PASSWORD 
again.
Inquiring Code 
(PAS SWO R D)
PASSWORD AGAIN  BOX
MyScreen 
PASSWORD on/off  menu
ENTER PASSWORD BOX  (small)
(continued on next page) 
						

							51
OPTION Menu
OPTION Menu (continued)
ItemDescription
SECURITY
(continued)
2.2-4   Move the cursor to the right side of the 
PASSWORD AGAIN BOX and press the 
► button to display the PASSWORD for 
about 20 seconds, please make note of the 
PASSWORD during this time. 
Pressing the 
ENTER button on the remote control 
or INPUT  button on the projector will return to 
MyScreen PASS WORD on/off menu.
When a PASSWORD is set for MyScreen:
• The MyScreen registration function (and menu) will be unavailable.
• The MyScreen Lock menu will be unavailable.
• The START UP setting will be locked on MyScreen (and the menu will be 
unavailable).
Turning the MyScreen PASSWORD off will allow normal operation of these 
functions.
• Please do not forget your MyScreen PASSWORD.
2.3 Turning the PASSWORD off
2.3-1   Follow the procedure in 2.1-1 to display the MyScreen  PASSWORD 
on/off menu.
2.3-2   Select TURN OFF to display the ENTER PASSWORD BOX (large). 
Enter the registered PASSWORD and the screen will return to the 
MyScreen on/off menu.
If an incorrect PASSWORD is input, the menu will close. If necessary, repeat 
the process from 2.3-1.
2.4 If you have forgotten your PASSWORD
2.4-1   Follow the procedure in 2.1-1 to display the MyScreen PASSWORD 
on/off menu.
2.4-2   Select TURN OFF to display the ENTER 
PASSWORD BOX (large). The 10 digit 
Inquiring Code will be displayed inside the 
BOX.
2.4-3   Contact your dealer with the 10 digit Inquiring 
Code. Your PASSWORD will be sent after 
your user registration information is confirmed.
3. Using the PIN LOCK FunctionPIN LOCK is a function which prevents the projector from being used unless 
a registered Code is input.
3.1 Registering the PIN Code
3.1-1  Use the ▲/▼ buttons on the SECURITY menu 
to select PIN LOCK and press the ► button 
or the 
ENTER button to display the PIN LOCK 
on/off menu.
3.1-2   Use the ▲/▼ buttons on the PIN LOCK on/off 
menu to select TURN ON and the PIN BOX 
will be displayed. 
ENTER PASSWORD 
BOX (large)
NOTE PASSWORD 
BOX
(continued on next page)
PIN LOCK on/off menu 
						

							52
OPTION Menu
OPTION Menu (continued)
ItemDescription
SECURITY
(continued)
3.1-3    Input a 4 part PIN Code using the ▲/▼/◄/►/
RGB and INPUT  buttons. 
The PIN CODE AGAIN BOX will appear. 
Reenter the same PIN Code. This will 
complete the PIN Code registration.
• If there is no key input for about 55 seconds while 
the PIN BOX or the PIN CODE AGAIN BOX is 
displayed, the menu will close. If necessary, repeat 
the process from 3.1-1.
Afterwards, anytime the projector is restarted after 
the power switch is turned off the PIN BOX will be 
displayed. Enter the registered PIN Code.
The projector can be used after entering the 
registered PIN Code. If an incorrect PIN Code is 
input, the PIN BOX will be displayed again.
If an incorrect PIN Code is input 3 times, the projector will turn of f. 
Afterwards the projector will turn off every time an incorrect PIN Code is 
input. The projector will also turn off if there is no key input for about 5 
minutes while the PIN BOX is displayed.
This function will activate only when the projector is started after the power 
switch was turned off.
• Please do not forget your PIN Code.
3.2 Turning Off the PIN LOCK Function
3.2-1   Follow the procedure in 3.1-1 to display the PIN LOCK on/off menu. 
Use the ▲/▼ buttons to select TURN OFF and the PIN BOX will be 
displayed.  
Enter the registered PIN Code to turn the PIN LOCK function off.
If an incorrect PASSWORD is input 3 times, the menu will close.
3.3 If you have forgotten your PIN Code
3.3-1   While the PIN BOX is displayed, press and 
hold the RESET  button for three seconds 
or press and hold the INPUT  button for 3 
seconds while pressing the ► button on the 
projector.
• If there is no key input for about 5 minutes while 
the Inquiring Code is displayed, the projector will 
turn off.
3.3-2   Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD 
will be sent after your user registration information is confirmed.
PIN BOX
PIN CODE AGAIN BOX
Inquiring Code (PIN Code)
(continued on next page) 
						

							53
OPTION Menu
OPTION Menu (continued)
ItemDescription
SECURITY
(continued)
4. Using the Transition Detector Function
While the Transition Detector function is ON, when power switch is started to 
supply to the projector, it might react as below.
• Transition Detector alarm shown below might appear on screen, if the 
projector has been moved or re-installed.
• Transition Detector alarm might appear on screen, if the MIRROR setting 
has been changed.
• Keystone adjustment feature has been prohibited as long as the Transition 
Detector function is ON.
4.1 Turning On the Transition Detector Function
4.1-1  Use the ▲/▼ buttons on the SECURITY menu to 
select Transition Detector and press the ► or the 
ENTER button to display the Transition Detector on/
off menu. Select TURN ON and the current angle 
and mirror setting will be recorded.
• This feature may not function properly if the projector is 
not in a stable position when TURN ON is selected.
4.1-2  If this function is set to TURN ON when the 
vertical angle of the projector or mirror setting 
at which the projector is turned on is different 
than the previously recorded, the Transition 
Detector Alarm will be displayed and the 
projector will not display the input signal.
Set the Transition Detector off in the SECURITY menu to display the input signal.
If the Transition Detector ALARM is displayed for about 5 minutes, the lamp will turn 
off. 
This function will activate only when the projector is started after the power 
switch was turned off.
4.2 Setting the Transition Detector PASSWORD
4.2-1   Use the ▲/▼ buttons on the SECURITY menu to select Transition 
Detector and press the ► or the ENTER button to display the 
Transition Detector on/off menu.
4.2-2   Use the ▲/▼ buttons on the Transition 
Detector on/off menu to select TURN ON. 
The ENTER PASSWORD BOX (small) will be 
displayed.
4.2-3 
 Use the ▲/▼/◄/► buttons to enter a 
PASSWORD. Move the cursor to the right side of 
the ENTER PASSWORD BOX (small) and press 
the 
► button to display the PASSWORD AGAIN 
BOX, enter the same PASSWORD again.
4.2-4   Move the cursor to the right side of the 
PASSWORD AGAIN BOX and press the 
► button to display the PASSWORD for 
about 20 seconds, please make note of the 
PASSWORD during this time.
Pressing the 
ENTER button on the remote control or 
the INPUT  button on the projector will return to the 
Transition Detector on/off menu.
• Please do not forget your Transition Detector PASSWORD.
Transition Detector on/
off menu
Transition Detector  Alarm
ENTER PASSWORD BOX 
(small)
PASSWORD AGAIN BOX
NOTE PASSWORD BOX
(continued on next page) 
						

							54
OPTION Menu
OPTION Menu (continued)
ItemDescription
SECURITY
(continued) 4.3 Setting the Transition Detector off
4.3-1  
Follow the procedure in 4.1-1 to display the Transition Detector on/off 
menu.
4.3-2   Select TURN OFF to display the ENTER PASSWORD BOX (large). 
Enter the registered PASSWORD and the screen will return to the 
Transition Detector on/off menu.
If an incorrect PASSWORD is input, the menu will close. If necessary, repeat 
the process from 4.3-1.
4.4 If you have forgotten your PASSWORD
4.4-1   Follow the procedure in 4.1-1 to display the Transition Detector on/off 
menu.
4.4-2  
Select TURN OFF to display the ENTER 
PASSWORD BOX (large). The 10 digit Inquiring 
Code will be displayed inside the BOX.
4.4-3   Contact your dealer with the 10 digit Inquiring 
Code. Your PASSWORD will be sent after your 
user registration information is confirmed.
5. Using the MY TEXT PASSWORD function
This item allows you to display your own message (MY TEXT) on the START 
UP screen and INPUT-INFORMATION. It can be protected by a password to 
prevent it from being overwritten.
5.1 Writing the MY TEXT
(1)  Use the ▲/▼ buttons on the SECURITY menu 
to select the MY TEXT WRITING menu and 
press the ► button. The MY TEXT WRITING 
dialog will be displayed.
(2) 
 The current MY TEXT will be displayed on the first 3 
lines. If not yet written, the lines will be blank.
Use the 
▲/▼/◄/► buttons and the ENTER or INPUT  button to select and enter 
characters. The RESET  button can be used to erase 1 character at a time. Also if 
you move the cursor to DELETE or ALL CLEAR on screen and push the ENTER 
or INPUT  button, 1 character or all characters will be erased. The MY TEXT can 
be input up to 24 characters on each line.
(3)   
To change an already inserted character, press 
the ▲/▼ button to move the cursor to one of 
the first 3 lines, and use the ◄/► buttons to 
move the cursor on the character to be changed. 
After pressing the 
ENTER or INPUT  button, the 
character is selected. Then, follow the same 
procedure as described at the item (2) above.
(4)    To finish entering text, move the cursor to the 
SAVE on screen and press the 
ENTER or INPUT  
button. To revert to the previous MY TEXT 
without saving changes, move the cursor to the 
CANCEL on screen and press the 
ENTER or INPUT  button.
• The MY TEXT WRITING function is available only when the MY TEXT 
PASSWORD function is set to TURN OFF.
ENTER PASSWORD BOX  (large)
(continued on next page) 
						

							55
OPTION Menu
OPTION Menu (continued)
ItemDescription
SECURITY
(continued) 5.2 Displaying the MY TEXT
(1)  
Use the ▲/▼ buttons on the SECURITY menu 
to select the MY TEXT DISPLAY menu and 
press the ► button to display the MY TEXT 
DISPLAY on/off menu.
(2)   Use the ▲/▼ buttons on the MY TEXT DISPLAY 
on/off menu to select on or off.
TURN ON 
ó TURN OFF
When it is set TURN ON, the MY TEXT will be 
displayed on the START UP screen and the INPUT-
INFORMATION- when the INFORMATION on the 
SERVICE menu is chosen.
• This function is available only when the MY TEXT 
PASSWORD function is set to the TURN OFF.
5.3 Turning on the MY TEXT PASSWORDThe MY TEXT PASSWORD function can prevent the MY TEXT from being overwritten.
5.3-1 
  Turning on the MY TEXT PASSWORD function
(1)   Use the ▲/▼ buttons on the SECURITY menu 
to select the MY TEXT PASSWORD menu and 
press the ► button to display the MY TEXT 
PASSWORD on/off menu.
5.3-2   Setting the MY TEXT PASSWORD
(1)   Display the MY TEXT PASSWORD on/off menu 
using the procedure in 5.3-1
(2)   Use the ▲/▼ buttons on the MY TEXT 
PASSWORD menu to select TURN ON. The 
ENTER PASSWORD BOX (small) will be 
displayed.
(3)   Use the ▲/▼/◄/► buttons to enter the 
PASSWORD. Move the cursor to the right side of 
the ENTER PASSWORD BOX (small) and press 
the ► button to display the PASSWORD AGAIN 
BOX, and then enter the same PASSWORD 
again.
(4)   Move the cursor to the right side of the 
PASSWORD AGAIN BOX and press ► button to 
display the PASSWORD for about 20 seconds, 
then please make note of the PASSWORD 
during this time.
Pressing the 
ENTER button on the remote control 
or INPUT  button on the projector will return to the 
MY TEXT PASSWORD on/off menu. When the 
PASSWORD is set for the MY TEXT;
• The MY TEXT DISPLAY menu will be unavailable, which can prohibit 
changing the DISPLAY setting.
• The MY TEXT WRITING menu will be unavailable, which can prevent the 
MY TEXT from being overwritten.
MY TEXT DISPLAY on/ off menu
ENTER PASSWORD BOX  (small)
PASSWORD AGAIN BOX 
NOTE PASSWORD BOX 
(continued on next page)
MY TEXT PASSWORD on/off menu 
						

							56
OPTION Menu
OPTION Menu (continued)
ItemDescription
SECURITY
(continued)
5.3-3   
Turning the MY TEXT PASSWORD off
(1)   Follow the procedure in 5.3-1 to display the MY 
TEXT PASSWORD on/off menu.
(2)   Select TURN OFF to display the ENTER 
PASSWORD BOX (large). Enter the registered 
PASSWORD and the screen will return to the 
MY TEXT PASSWORD on/off menu. 
If an incorrect PASSWORD is input, the menu will close. If necessary, repeat 
the process from 5.3-3(1)
5.3.4 If you have forgotten your PASSWORD.
(1)   Follow the procedure in 5.3-1 to display the MY TEXT PASSWORD on/
off menu.
(2)   Select TURN OFF to display the ENTER PASSWORD BOX (large). The 
10 digit inquiring code will be displayed inside the box. 
(3)   Contact your dealer with the 10 digit inquiring code. Your PASSWORD 
will be sent after your user registration information is confirmed.
ENTER PASSWORD BOX 
(large) 
						

							57
NETWORK Menu
Remember that incorrect network settings on this projector 
may cause trouble on the network. Be sure to consult with 
your network administrator before connecting to an existing 
access point on your network.
Select “NETWORK” from the main menu to access the 
following functions. 
Select an item using the ▲/▼ cursor buttons on the projector or remote control, 
and press the ► cursor button on the projector or remote control, or 
ENTER 
button on the remote control to execute the item. Then perform it according to the 
following table.
See the User’s Manual - Network Guide for details of NETWORK operation.
NETWORK Menu
• If you are not utilizing SNTP (Date/Time Settings of the User’s 
Manual - Network Guide) , then you must set the DATE AND TIME during the 
initial installation. NOTE
Item Description
SETUP Selecting this item displays the SETUP Menu 
for the network.
Use the ▲/▼ buttons to select an item, and 
the ► or 
ENTER button on the remote control 
to perform the item.
DHCP (Dynamic  Host 
Configuration  Protocol)
Use the ▲/▼ buttons to turn DHCP on/off.
ON  ó OFF
Select OFF when the network does  
not have DHCP enabled.
• When the “DHCP” setting changes to “ON”, it takes a 
little time to obtain IP address from DHCP server.
• Auto IP function will be assigned an IP address if the 
projector could not obtain an IP address from server 
even if DHCP is “ON”.
(continued on next page) 
						

							58
NETWORK Menu
NETWORK Menu (continued)
ItemDescription
SETUP
(continued)
IP 
ADDRESS
Use the ▲/▼ /◄/► buttons to 
enter the IP ADDRESS. This 
function can only be used when 
DHCP is set to OFF.
• The IP ADDRESS is the number that identifies this 
projector on the network. You cannot have two devices 
with the same IP ADDRESS on the same network.
• The IP ADDRESS “0.0.0.0” is prohibited.
SUBNET  MASK Use the ▲/▼
/◄/► buttons to 
enter the same SUBNET MASK 
used by your PC. This function 
can only be used when DHCP is 
set to OFF.
•  The SUBNET MASK ”0.0.0.0” is prohibited.
DEFAULT 
GATEWAY
Use the ▲/▼ /◄/► buttons to 
enter the DEFAULT GATEWAY 
(a node on a computer network 
that serves as an access point to 
another network) address.
This function can only be used when DHCP is set to 
OFF.
DNS 
SERVER Use the ▲/▼/◄/► buttons to 
input the DNS server address. The 
DNS server is a system to control 
domain names and IP addresses 
on the Network. 
TIME 
DIFFERENCE
Use the ▲/▼  buttons to enter the 
TIME DIFFERENCE. 
Set the same TIME DIFFERENCE 
as the one set on your PC. If 
unsure, consult your IT manager. 
Use the ◄ button to return to 
the menu after setting the TIME 
DIFFERENCE.
DATE  AND 
TIME Use the ▲/▼
/◄/► buttons to 
enter the Year (last two digits), 
Month, Date, Hour and Minute.
• The projector will override this setting and retrieve 
DATE AND TIME information from the Time server 
when SNTP is enabled.  (
 Date/Time Settings of the 
User’s Manual - Network Guide)
(continued on next page)