Planar Pr9030 Projector User Manual

							19
Operating
BLANKLASER
ASPECT
PUSH  ENTER
 PAGE UP
LASER
INDICATOR
MY SOURCE/
DOC.CAMERA
SEARCH
STANDBY/ON
VIDEORGB
PAGE DOWN
ESCMENU RESET
POSITION AUTOPbyP
MAGNIFYON
OFFMY BUTTON1
2VOLUME+
-
FREEZE KEYSTONE MUTE
• When the vertical lens shift 
is adjusted, it is recommended to shift 
the picture upward. NOTE
1.Use the zoom ring to adjust the screen size.
Adjusting the zoom and focus
2.Use the focus ring to focus the picture.
1/2
1/10
1/10
Zoom ring Focus ring
Top
1.Use the vertical lens shift dial to shift 
the picture upward or downward.
Adjusting the lens shift
2.Use the horizontal lens shift dial to 
shift the picture left or right.
1.Press the AUTO button on the remote control.
Pressing this button performs the following.
Using the automatic adjustment feature
   For an RGB signal  
The vertical position, the horizontal position and the 
horizontal phase will be automatically adjusted.  
Make sure that the application window is set to its 
maximum size prior to attempting to use this feature. 
A dark picture may still be incorrectly adjusted. Use a 
bright picture when adjusting.
   For a video signal and s-video signal  
The video format best suited for the respective input signal will be sel\
ected 
automatically. This function is available only when the AUTO is selected for 
the VIDEO FORMAT item in the INPUT Menu (
33). The vertical position 
and horizontal position will be automatically set to the default.
   For a component video signal  
The vertical position, horizontal position and horizontal phase will be \
automatically set to the default.
●    The automatic adjustment operation requires approx. 10 seconds.  Also 
please note that it may not function correctly with some input. When thi\
s 
function is performed for a video signal, a certain extra such as a line\
 may 
appear outside a picture.
●    The items adjusted by this function may vary when the FINE or DISABLE is 
selected for the AUTO ADJUST item of the SERVICE item in the OPTION 
Menu (
47).
UP
DOWN
LEFT RIGHT
Lens shift cover 
						

							20
Operating
BLANKLASER
ASPECT
PUSH  ENTER
 PAGE UP
LASER
INDICATOR
MY SOURCE/
DOC.CAMERA
SEARCH
STANDBY/ON
VIDEORGB
PAGE DOWN
ESCMENU RESET
POSITION AUTOPbyP
MAGNIFYON
OFFMY BUTTON1
2VOLUME+
-
FREEZE KEYSTONE MUTE
BLANK LASER
ASPECT
PUSH  ENTER
 PAGE UP
LASER
INDICATOR
MY SOURCE/
DOC.CAMERA
SEARCH
STANDBY/ON
VIDEORGB
PAGE DOWN
ESCMENU RESET
POSITION AUTOPbyP
MAGNIFYON
OFFMY BUTTON1
2VOLUME+
-
FREEZE KEYSTONE MUTE
1.Press the POSITION button on the remote control when no 
menu is indicated.  
The “POSITION” indication will appear on the screen.
Adjusting the position
2.Use the ▲/▼/◄/► cursor buttons to adjust the picture position.
When you want to reset the operation, press the RESET  
button on the remote control during the operation.
To complete this operation, press the 
POSITION  button 
again. Even if you do not do anything, the dialog will 
automatically disappear after a few seconds.
●  
When this function is performed on a video signal, s-video signal or com\
ponent 
video signal, some image such as an extra-line may appear at outside of the picture.
●  When this function is performing on a Video signal, S-Video signal, or component 
signal of 480i@60 or 576i@50 input the range of this adjustment depends on the 
OVER SCAN in IMAGE Menu (
30). It is not possible to adjust when the OVER 
SCAN is set to 10.
1.Press the KEYSTONE button on the remote 
control. A dialog will appear on the screen 
to aid you in correcting the distortion.
Correcting the keystone distortions
2.Use the ▲/▼ cursor buttons to select AUTO or MANUAL 
operation, and press the ► button to perform the following.
●    The adjustable range of this function will vary among inputs. For some input, this 
function may not work well.
●   When V:INVERT or H&V:INVERT is selected to the MIRROR item in the SETUP 
Menu, if the projector screen is inclined or angled downward, this function may 
not work correctly.
●   When the zoom adjustment is set to the TELE (telephoto focus), this function 
may be excessive. This function should be used when the zoom adjustment is 
set to the full WIDE (wide-angle focus) whenever possible.
●   When the projector is placed on the level (about ±3°), this function may not work.
●  
When the projector is inclined to near ±30 degree or over, this function may not work well.
●   When the vertical lens shift is not set fully upward (not set fully downward for the 
optional lens type FL-601 only (
47)), this function may not work well.
●  
When the horizontal lens shift is not set to the center, this function may not work well.
● This function will be unavailable when Transition Detector is on (53).
1)  AUTO executes automatic vertical keystone correction. 
2)    MANUAL displays a dialog for keystone correction.   
Use the ◄/► cursor buttons to select the direction to 
correct (
 or ) then use the ▲/▼ buttons for adjustment.
To close the dialog and complete this operation, press the 
KEYSTONE button again. Even if you don’t do anything, the 
dialog will automatically disappear after a few seconds. 
						

							21
Operating
BLANKLASER
ASPECT
PUSH  ENTER
 PAGE UP
LASER
INDICATOR
MY SOURCE/
DOC.CAMERA
SEARCH
STANDBY/ON
VIDEORGB
PAGE DOWN
ESCMENU RESET
POSITION AUTOPbyP
MAGNIFYON
OFFMY BUTTON1
2VOLUME+
-
FREEZE KEYSTONE MUTE
BLANK LASER
ASPECT
PUSH  ENTER
 PAGE UP
LASER
INDICATOR
MY SOURCE/
DOC.CAMERA
SEARCH
STANDBY/ON
VIDEORGB
PAGE DOWN
ESCMENU RESET
POSITION AUTOPbyP
MAGNIFYON
OFFMY BUTTON1
2VOLUME+
-
FREEZE KEYSTONE MUTE
• The zoom level can be finely adjusted. Closely watch the screen to 
find the level you want. NOTE
1.Press the ON button of MAGNIFY  on the remote control.  
The “MAGNIFY” indication will appear on the screen and 
the projector will go into the MAGNIFY mode. When the 
ON button of MAGNIFY  is pressed first after the projector 
is started, the picture will be zoomed. The indication will 
disappear in several seconds with no operation.
Using the magnify feature
2.Use the ▲/▼ cursor buttons to adjust the zoom level.To move the zoom area, 
press the 
POSITION  button in the MAGNIFY mode, then use the ▲/▼/◄/► 
cursor buttons to move the area. And to finalize the zoom area, press the 
POSITION  button again.
To exit from the MAGNIFY mode and restore the screen to normal, press the 
OFF  button of MAGNIFY  on the remote control. 
●    The projector automatically exits from the MAGNIFY mode when the input 
signal is changed or when the display condition is changed. 
●   In the MAGNIFY mode, the keystone distortion condition may vary, it will be 
restored when the projector exits from the MAGNIFY mode.
1.Press the FREEZE button on the remote control.  
The “FREEZE” indication will appear on the screen (however, 
the indication will not appear when the TURN OFF is 
selected for the MESSAGE item in the SCREEN Menu 
(
42)), and the projector will go into the FREEZE mode, 
which the picture is frozen.
To exit the FREEZE mode and restore the screen to normal, 
press the 
FREEZE button again. 
Freezing the screen
●   
The projector automatically exits from the FREEZE mode when some control 
buttons are pressed.
●   If the projector continues projecting a still image for a long time, the LCD 
panel might possibly be burned in. Do not leave the projector in the FREEZE 
mode for too long. 
						

							22
Operating
BLANKLASER
ASPECT
PUSH  ENTER
 PAGE UP
LASER
INDICATOR
MY SOURCE/
DOC.CAMERA
SEARCH
STANDBY/ON
VIDEORGB
PAGE DOWN
ESCMENU RESET
POSITION AUTOPbyP
MAGNIFYON
OFFMY BUTTON1
2VOLUME+
-
FREEZE KEYSTONE MUTE
1.Press the BLANK button on the remote control.  
The blank screen will be displayed instead of the screen of 
input signal. Please refer to the BLANK item in SCREEN 
Menu (
39).
To exit from the blank screen and return to the input signal 
screen, press the 
BLANK button again. 
Temporarily blanking the screen
●  The projector automatically exits from the BLANK mode when some control 
buttons are pressed.
• The sound is not connected with the blank screen function. If necessary, 
set the volume or mute first.NOTE 
						

							23
Operating
Main
SubRGB1
RGB2HDMIComponent Scart RGB S-Video
S-VideoRGB1 000000
RGB2 000000
HDMI 00 0X XX
Component000 00Scart RGB00X XXS-Video00X 0X XVideo00X 0X X
PbyP (Picture by Picture)
The PbyP is a function to display two different picture signals on a screen that is 
split in two areas for each signal. Some of functions can be used with t\
he same 
operation as it for the normal mode (not in the  PbyP mode). There are some 
operations available only in the  PbyP mode.
The setting information will be appeared for several 
seconds when the  PbyP function is started. It shows 
the input signal information for each area. Also, there 
will be a yellow frame and speaker mark with one of the area that is the\
 main area 
where most of operations are effective. The information can be appeared using 
the cursor buttons ▲/▼/◄/► when the setting information is not on the screen. Press the 
PbyP  button on the remote control, then 
the PbyP function will be started. To quit the PbyP 
mode, press the button again.
Most of operations are effective for the main area 
only. Also the audio input signal paired with the 
picture input signal for the main area is assigned as 
the audio output signal. The main area can be changed using the 
cursor buttons ◄/► when the setting information is on the screen.
Press the INPUT , RGB or VIDEO button while in 
the PbyP mode, the menu to select the input signal 
will be appeared. Choose a signal using the cursor 
buttons ▲/▼. If you want to change the signal in the sub 
area, switch the main area using the cursor buttons ◄/► first. 
Displaying the same signal on the both areas is not allowed. 
For other combinations of the input signal, refer to the right 
table. Any combinations marked with X can not be selected.

Press the MY BUTTON1/2 assigned the  PbyP SWAP 
(
46). The position of the both area is exchanged 
without any setting change.
Starting the PbyP
Changing the main area Showing the setting information
Changing the picture input signal
Using the PbyP SWAP function
normal mode PbyP mode
setting information
•For some signals, it may not be displayed correctly in the  PbyP mode, 
even if it can be displayed properly in the normal mode. NOTE
main area
sub area
main area 
						

							24
Operating
BLANKLASER
ASPECT
PUSH  ENTER PAGE UP
LASER
INDICATORMY SOURCE/
DOC.CAMERASEARCH
STANDBY/ON
VIDEORGB
PAGE DOWNESCMENU RESET
POSITION AUTOPbyPMAGNIFYON
OFFMY BUTTON1
2VOLUME+
-FREEZE KEYSTONE MUTE
BLANK LASER
ASPECT
PUSH  ENTER
 PAGE UP
LASER
INDICATOR
MY SOURCE/
DOC.CAMERA
SEARCH
STANDBY/ON
VIDEORGB
PAGE DOWN
ESCMENU RESET
POSITION AUTOPbyP
MAGNIFYON
OFFMY BUTTON1
2VOLUME+
-
FREEZE KEYSTONE MUTE1.Press the MENU button on the remote control or one of the cursor 
buttons on the projector. 
The Advanced MENU, or EASY MENU that has priority just after 
powered on, will appear. 
If you want to move the menu position, use the cursor buttons after 
pressing the 
POSITION button. While the projector is displaying any 
menu, the 
MENU button on the projector works as the cursor buttons.
Using the menu function
2.If you want to change it to the Advanced MENU, select the 
"Go to Advanced Menu..."
●   Some functions cannot be performed when a certain input port is selected, or 
when a certain input signal is displayed.
●  
When you want to reset the operation, press the RESET  button on the remote control 
during the operation. Note that items whose functions are performed simu\
ltaneously 
with operation (ex. LANGUAGE, H PHASE, VOLUME etc.) cannot be reset.
●   In the Advanced MENU, when you want to return to the previous display, press the ◄ 
cursor button on the projector or remote control, or the 
ESC button on the remote control.
This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, 
NETWORK, C.C. and EASY MENU. The EASY MENU consists of functions often used, and the other 
menus are classified into each purpose and brought together as the Advanced Menu. Each of these 
menus is operated using the same methods. The basic operations of these menus are as follows.
In the EASY MENU
3.Use the ▲/▼ cursor buttons to select an item to operate.
4.Use the ◄/► cursor buttons to operate the item.
5.Press the MENU button on the remote control again to close the menu and complete this \
operation. 
Even if you do not do anything, the dialog will automatically disappear \
after about 10 seconds.
2.Use the ▲/▼ cursor buttons to select a menu. 
If you want to change it to the EASY MENU, select the EASY MENU. 
Then press the ► cursor button on the projector or remote control, or the ENTER button 
on the remote control to select an item. The display of the selected menu will be active.
In the Advanced MENU
3.Use the ▲/▼ cursor buttons to select an item to operate. 
Then press the ► cursor button on the projector or remote control, or the ENTER button 
on the remote control to progress. The operation menu of the selected item will appear.
4.Use the ▲/▼ cursor buttons to operate the item.
RESET  button
ENTER button
MENU button
Cursor buttons
INPUT
 button 
						

							25
EASY MENU
EASY MENU
From the EASY MENU, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control. Then perform it according to 
the following table.
ItemDescription
ASPECT Using the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE
 Menu
 (
30).
AUTO 
KEYSTONE 
EXECUTE Using the ► button executes the auto keystone function.See the AUTO KEYSTONE  EXECUTE item in SETUP Menu (
36).
KEYSTONE 
Using the ◄/► buttons corrects the vertical keystone distortion.
See the KEYSTONE  item in SETUP Menu ( 36).
KEYSTONE 
Using the ◄/► buttons corrects the horizontal keystone distortion.
See the KEYSTONE  item in SETUP Menu ( 37).
 PICTURE MODE Using the ◄/► buttons switches the picture mode.
The picture modes are combinations of GAMMA and COLOR 
TEMP settings. Choose a suitable mode according to the projected 
source.
     NORMAL  ó CINEMA 
ó DYNAMIC 
ó BOARD(BLACK)
          DAYTIME  ó WHITEBOARD 
ó BOARD(GREEN)
COLOR TEMP
GAMMA
NORMAL #2 MID #1 DEFAULT
CINEMA #3 LOW #2 DEFAULT
DYNAMIC #1 HIGH #3 DEFAULT
BOARD(BLACK) #4 Hi-BRIGHT-1 #4 DEFAULT
BOARD(GREEN) #5 Hi-BRIGHT-2 #4 DEFAULT
WHITEBOARD #2 MID #5 DEFAULT
DAYTIME #6 Hi-BRIGHT-3 #6 DEFAULT
• When the combination of GAMMA and COLOR TEMP differs 
from pre-assigned modes above, the display on the menu for the 
PICTURE MODE is “CUSTOM”. Please refer to the GAMMA and 
COLOR TEMP (
27, 28) items in PICTURE Menu.
• When this function is performed, a certain extra such as a line may appear.
(continued on next page) 
						

							26
EASY MENU
EASY MENU (continued)
ItemDescription
BRIGHTNESS Using the ◄/► buttons adjusts the brightness.
See the BRIGHTNESS item in PICTURE Menu
 (
27).
CONTRAST
Using the ◄/► buttons adjusts the contrast.
See the CONTRAST item in PICTURE Menu
 ( 27).
COLOR Using the ◄/► buttons adjusts the strength of whole color.
See the COLOR item in PICTURE Menu
 (
28).
TINT Using the ◄/► buttons adjusts the tint.
See the TINT item in PICTURE Menu
 (
28).
SHARPNESS
Using the ◄/► buttons adjusts the sharpness.
See the SHARPNESS item in PICTURE Menu
 ( 28).
WHISPER Using the ◄/► buttons turns off/on the whisper mode.
See the WHISPER item in SETUP Menu
 (
37).
MIRROR Using the ◄/► buttons switches the mode for mirror status.
See the MIRROR item in SETUP Menu
 (
37).
RESET Performing this item resets all of the EASY MENU items except the 
FILTER TIME and LANGUAGE.
A dialog is displayed for confirmation. Selecting the RESET using 
the ▲ button performs resetting.
FILTER TIME The usage time of the air filter is shown in the menu.
Performing this item resets the filter time which counts usage time 
of the air filter.
A dialog is displayed for confirmation. Selecting the RESET using 
the ▲ button performs resetting. 
See the FILTER TIME item in OPTION Menu
 (
45).
LANGUAGE
Using the ◄/► buttons changes the display language. 
See the LANGUAGE item in SCREEN Menu
 ( 39).
Go to
Advanced Menu...Select “Go to Advanced Menu…” on the menu, and press the ► 
or ENTER button to use the menu of PICTURE, IMAGE, INPUT, 
SETUP, AUDIO, SCREEN, OPTION, NETWORK or C.C.. 
						

							27
PICTURE Menu
PICTURE Menu
From the PICTURE Menu, items shown in the table 
below can be performed. 
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control, and press the ► cursor 
button on the projector or remote control, or the 
ENTER 
button on the remote control to execute the item. Then 
perform it according to the following table.
Item Description
BRIGHTNESS Using the ▲/▼ buttons adjusts the brightness.
Light  ó Dark
CONTRAST Using the ▲/▼ buttons adjusts the contrast.
Strong  ó Weak
GAMMA Using the ▲/▼ buttons switches the gamma mode.
To adjust CUSTOM
Selecting a mode whose name includes 
CUSTOM and then pressing the ► button 
or the 
ENTER button displays a dialog to aid 
you in adjusting the mode.  
This function is useful when you want to 
change the brightness of particular tones.
Choose an item using the ◄/► buttons, and   
adjust the level using the ▲/▼ buttons.
You can display a test pattern for checking the effect of your 
adjustment by pressing the 
ENTER button. 
Each time you press the ENTER button, the pattern changes as 
below.
  No pattern  ð Gray scale of 9 steps 
     Ramp 
 Gray scale of 15 steps
The eight equalizing bars correspond to eight tone levels of the test 
pattern  (Gray  scale  of  9  steps)  except  the  darkest  in  the  left  end. 
If  you  want  to  adjust  the  2nd  tone  from  left  end  on  the  test  pattern, 
use  the  equalizing  adjustment  bar  “1”.  The  darkest  tone  at  the  left 
end  of  the  test  pattern  cannot  be  controlled  with  any  of  equalizing 
adjustment bar.
• When this function is performed, lines or other 
distortion may appear.
(continued on next page)

 

%&6-5
 


$6450.
 


%&6-5
 


$6450.
 


%&6-5

$6450.



























































































$6450.

%&6-5
 


$6450.
 


%&6-5
 


$6450.
 


%&6-5 
						

							28
PICTURE Menu
PICTURE Menu (continued)
ItemDescription
COLOR TEMP Using the ▲/▼ buttons switches the color temperature mode.
To adjust CUSTOM
Selecting a mode whose name includes 
CUSTOM and then pressing the ► button or the 
ENTER button displays a dialog to aid you in 
adjusting the OFFSET and GAIN of the selected 
mode.
OFFSET adjustments change the color intensity 
on the whole tones of the test pattern.
GAIN adjustments mainly affect color intensity 
on the brighter tones of the test pattern.
Choose an item using the ◄/► buttons, and adjust the level using 
the ▲/▼ buttons. 
You can display a test pattern for checking the effect of your 
adjustment by pressing the 
ENTER button.  
Each time you press the ENTER button, the pattern changes as 
below.
No pattern  ð Gray scale of 9 steps
      Ramp 
 Gray scale of 15 steps
• When this function is performed, lines or other 
distortion may appear.
COLOR Using the ▲/▼ buttons adjusts the strength of whole color.
Strong  ó Weak
• This item can be selected only for a video signal, s-video, 
component video or HDMI signal.
TINT Using the ▲/▼ buttons adjusts the tint.
Greenish  ó Reddish
• This item can be selected only for a video signal, s-video, 
component video or HDMI signal.
SHARPNESS Using the ▲/▼ buttons adjusts the sharpness.
Strong  ó Weak
•  There may be some noise and/or the screen may flicker for a 
moment when an adjustment is made. This is not a malfunction.
(continued on next page)
#1 HIGH#1 CUSTOM #2 MID#2 CUSTOM#3 LOW 
#3 CUSTOM
#5 CUSTOM   
    #5 Hi-BRIGHT-2   
    #4 CUSTOM
#6 CUSTOM 
 


#6 Hi-BRIGHT-3#4 Hi-BRIGHT-1