Planar Pr9030 Projector User Manual

69
Troubleshooting
Regarding the indicator lamps
Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP  
indicator have the meanings as described in the table below. Please follow the 
instructions within the table. If the same indication is displayed after\
 the remedy, 
or if an indication other than the following is displayed, please contac\
t your dealer 
or service company.
(Continued on next page)
POWER 
indicatorLAMP 
indicatorTEMP 
indicator Description
Lighting
In Orange...

70
Troubleshooting
• When the interior portion has become overheated, for safety 
purposes, the power source is automatically turned off, and the indicator lamps 
may also be turned off. In such a case, press the “” (OFF) side of the power 
switch, and wait at least 45 minutes. After the projector has sufficiently cooled 
down, please make confirmation of the attachment state of the lamp and lamp 
cover, and then turn the power on again. NOTE
POWER 
indicatorLAMP 
indicatorTEMP 
indicator Description...

71
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects
►Never use the projector if abnormal operations such as smoke, 
strange odor, excessive sound, damaged casing or elements or cables, penetration 
of liquids or foreign matter, etc. should occur. In such cases, immediately turn off the 
power switch and then disconnect the power plug from the power outlet. After making 
sure that the smoke or odor has stopped, contact your dealer or service \
company.WARNING
(Continued on...

72
Troubleshooting
Phenomena that may be easily mistaken for machine defects (continued)
(Continued on next page)
PhenomenonCases not involving a machine defectReference
page
Sound does not  come out.
The signal cables are not correctly connected.Correctly connect the audio cables. 10
The MUTE function is working.Restore the sound pressing the MUTE or VOLUME button 
on the remote control. 17
The volume is adjusted to an extremely low level.Adjust the volume to a higher level using the menu function 
or...

73
Troubleshooting
Phenomena that may be easily mistaken for machine defects (continued)
• Although bright spots or dark spots may appear on the screen, this 
is a unique characteristic of liquid crystal displays, and it does not c\
onstitute or 
imply a machine defect. NOTE
Phenomenon Cases not involving a machine defectReference
page
Video screen
display freezes. The FREEZE function is working.
Press the 
FREEZE button to restore the screen to normal.
21
Colors have a faded- out
appearance, or Color...

74
Warranty and after-ser vice / Specifications
Warranty and after-service
If a problem occurs with the equipment, first refer to the “Troubleshooting” and 
run through the suggested checks. If this does not resolve the problem, \
please 
contact your dealer or service company. They will tell you what warranty condition 
is applied.
Specifications
• These specifications are subject to change without notice.
NOTE
Item Specifications
Product name Liquid crystal projector
Liquid
Crystal
Panel Panel size...

75
Specifications
Specifications (continued)
[unit: mm]
418
319
154 139
LAN
AC IN
I   O
VIDEO
CONTROL
AUDIO IN1
AUDIO IN2
AUDIO OUT
RGB
 OUTRGB1
RGB2
HDMI
 R             L      R           L
     AUDIO IN3        AUDIO IN4
CB/PBY CR/PRB/CB/PBR/CR/PRG/Y
HVUSBREMOTE 
CONTROL
   
S-VIDEO 

Planar Systems, Inc .
Corporate Headquarters
1195 NW Compton Drive
Beaverton, OR 97006-1992
Planar Customer Support
Telephone:
US: 1-866-PLANAR1 (866) 752-6271
Outside US: (503) 748-5799
E-mail: [email protected]
Online Technical Library: http://www.planar.com/support
24/7 Technical Support
© 2008 Planar Systems, Inc. Planar is a registered trademark of Plana\
r Systems, Inc.
Other brands and names are the property of their respective owners.
Technical information in this document is subject to...