Planar Pr9030 Projector User Manual

39
SCREEN Menu
SCREEN Menu
From the SCREEN Menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control, and press the ► cursor button 
on the projector or remote control, or 
ENTER button on 
the remote control to execute the item. Then perform it 
according to the following table.
Item Description
LANGUAGE
Using the ▲/▼ buttons switches the OSD (On Screen Display) language.
�
TÜRKÇE �
POLSKI �
SUOMI �
ENGLISH � FRANÇAIS �...

40
SCREEN Menu
SCREEN Menu (continued)
ItemDescription
START UP Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an 
unsuitable signal is detected.
MyScreen  ó ORIGINAL 
ó TURN OFF
    
Feature
MyScreen Screen can be registered by the MyScreen item 
(
41).
ORIGINAL Screen preset as the standard screen.
TURN OFF Plain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL 
screen will change to the BLANK...

41
SCREEN Menu
SCREEN Menu (continued)
ItemDescription
MyScreen This item allows you to capture an image for use as a MyScreen 
image which can be used as the BLANK screen and START UP 
screen. Display the image you want to capture before executing the 
following procedure.
1.  
Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if 
you start capturing an image from the 
current screen.
Please wait for the target image to be displayed, and press 
the 
ENTER button on the remote...

42
SCREEN Menu
SCREEN Menu (continued)
ItemDescription
MESSAGE Using the ▲/▼ buttons turns on/off the message function.
TURN ON  ó TURN OFF
When the TURN ON is selected, the following message function works.
“AUTO IN PROGRESS” while automatically adjusting
“NO INPUT IS DETECTED”
“SYNC IS OUT OF RANGE”
“INVALID SCAN FREQ”
“Searching….” while searching for the input
“Detecting….” while an input signal is detected
The indication of the input signal displayed by changing 
The indication of the aspect ratio...

43
SCREEN Menu
SCREEN Menu (continued)
ItemDescription
TEMPLATE Using ▲/▼ buttons switches the mode for the 
template screen. The selected template pattern 
can be displayed when the 
MY BUTTON allocated 
to the TEMPLATE function is pressed (
 46). DOT-LINE4 
ó DOT-LINE3 
ó DOT-LINE2
TEST PATTERN  ó DOT-LINE1 

44
OPTION Menu
OPTION Menu
From the OPTION Menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control, and press the ► cursor button 
on the projector or remote control, or 
ENTER button on 
the remote control to execute the item, except for the 
items LAMP TIME and FILTER TIME. Then perform it 
according to the following table.
Item Description
AUTO SEARCH
Using the ▲/▼ buttons turns on/off the automatic signal search...

45
OPTION Menu
OPTION Menu (continued)
ItemDescription
AUTO OFF Using the ▲/▼ buttons adjusts the time to count down to 
automatically turn the projector off.
Long (max. 99 minutes)  ó Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector 
lamp will be turned off. 
If one of the projector's buttons or the remote...

46
OPTION Menu
OPTION Menu (continued)
ItemDescription
MY BUTTON This item is to assign one of the following function to 
MY BUTTON 1 and 2 on the remote control (
6).Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then 
using the ▲/▼ buttons sets one of the following functions to the chosen button.
• RGB1: Sets port to RGB1.
• RGB2: Sets port to RGB2.
• HDMI: Sets port to HDMI.
• COMPONENT: Sets port to COMPONENT (Y, CB/PB, CR/PR).
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to...

47
OPTION Menu
OPTION Menu (continued)
ItemDescription
SERVICE
(continued) AUTO ADJUST
Using the ▲/▼ buttons to select one of the mode. 
When the DISABLE is selected, the automatic 
adjustment feature is disabled.
FINE  ó FAST 
ó DISABLE
      
FINE: Finer tuning including H.SIZE adjustment.
FAST:  Faster tuning, setting H.SIZE to prearranged data for the input signal.
• Depending on conditions, such as input image, signal cable to the projector, 
environment around the projector, etc., the automatic...

48
OPTION Menu
OPTION Menu (continued)
ItemDescription
SERVICE
(continued) KEY LOCK
Using  the  ▲/▼  buttons  turns  on/off  the  key  lock  feature.  When 
TURN  ON  is  selected,  the  buttons  on  the  projector  except  the 
STANDBY/ON button are locked.
TURN ON  ó TURN OFF
• Please use to avoid a mischief and touching accidentally. This 
function does not have any effect on the remote control.
REMOTE RECEIV.
(1) Select a remote sensor using the ▲/▼ button. 1:FRONT  ó 2:TOP 
ó 3:REAR
         
(2)...