Planar Pr9030 Projector User Manual

49
OPTION Menu
OPTION Menu (continued)
ItemDescription
SECURITY This projector is equipped with security functions.
User registration is required before using the security functions.
Please contact your local dealer.
1. Using Security Features
1.1 Inputting the PASSWORD
1.1-1  
Use the ▲/▼ buttons on the OPTION 
Menu to select SECURITY and press the ► 
button. The ENTER PASSWORD box will be 
displayed. The factory default PASSWORD is 
9503. This PASSWORD can be changed (1.2 
Changing the PASSWORD). 
• It...

50
OPTION Menu
OPTION Menu (continued)
ItemDescription
SECURITY
(continued) 1.3 If you have forgotten your PASSWORD
1.3-1  
Follow the procedure in 1.1-1 to display the 
ENTER PASSWORD BOX.
1.3-2   While the ENTER PASSWORD BOX is 
displayed, press and hold the 
RESET  button 
on the remote control for about 3 seconds 
or press and hold the 
INPUT  button for 3 
seconds while pressing the ► button on the 
projector. 
The 10 digit Inquiring Code will be displayed.
• If there is no key input for about 55...

51
OPTION Menu
OPTION Menu (continued)
ItemDescription
SECURITY
(continued)
2.2-4   Move the cursor to the right side of the 
PASSWORD AGAIN BOX and press the 
► button to display the PASSWORD for 
about 20 seconds, please make note of the 
PASSWORD during this time. 
Pressing the 
ENTER button on the remote control 
or INPUT  button on the projector will return to 
MyScreen PASS WORD on/off menu.
When a PASSWORD is set for MyScreen:
• The MyScreen registration function (and menu) will be unavailable.
•...

52
OPTION Menu
OPTION Menu (continued)
ItemDescription
SECURITY
(continued)
3.1-3    Input a 4 part PIN Code using the ▲/▼/◄/►/
RGB and INPUT  buttons. 
The PIN CODE AGAIN BOX will appear. 
Reenter the same PIN Code. This will 
complete the PIN Code registration.
• If there is no key input for about 55 seconds while 
the PIN BOX or the PIN CODE AGAIN BOX is 
displayed, the menu will close. If necessary, repeat 
the process from 3.1-1.
Afterwards, anytime the projector is restarted after 
the power switch...

53
OPTION Menu
OPTION Menu (continued)
ItemDescription
SECURITY
(continued)
4. Using the Transition Detector Function
While the Transition Detector function is ON, when power switch is started to 
supply to the projector, it might react as below.
• Transition Detector alarm shown below might appear on screen, if the 
projector has been moved or re-installed.
• Transition Detector alarm might appear on screen, if the MIRROR setting 
has been changed.
• Keystone adjustment feature has been prohibited as...

54
OPTION Menu
OPTION Menu (continued)
ItemDescription
SECURITY
(continued) 4.3 Setting the Transition Detector off
4.3-1  
Follow the procedure in 4.1-1 to display the Transition Detector on/off 
menu.
4.3-2   Select TURN OFF to display the ENTER PASSWORD BOX (large). 
Enter the registered PASSWORD and the screen will return to the 
Transition Detector on/off menu.
If an incorrect PASSWORD is input, the menu will close. If necessary, repeat 
the process from 4.3-1.
4.4 If you have forgotten your...

55
OPTION Menu
OPTION Menu (continued)
ItemDescription
SECURITY
(continued) 5.2 Displaying the MY TEXT
(1)  
Use the ▲/▼ buttons on the SECURITY menu 
to select the MY TEXT DISPLAY menu and 
press the ► button to display the MY TEXT 
DISPLAY on/off menu.
(2)   Use the ▲/▼ buttons on the MY TEXT DISPLAY 
on/off menu to select on or off.
TURN ON 
ó TURN OFF
When it is set TURN ON, the MY TEXT will be 
displayed on the START UP screen and the INPUT-
INFORMATION- when the INFORMATION on the 
SERVICE menu is...

56
OPTION Menu
OPTION Menu (continued)
ItemDescription
SECURITY
(continued)
5.3-3   
Turning the MY TEXT PASSWORD off
(1)   Follow the procedure in 5.3-1 to display the MY 
TEXT PASSWORD on/off menu.
(2)   Select TURN OFF to display the ENTER 
PASSWORD BOX (large). Enter the registered 
PASSWORD and the screen will return to the 
MY TEXT PASSWORD on/off menu. 
If an incorrect PASSWORD is input, the menu will close. If necessary, repeat 
the process from 5.3-3(1)
5.3.4 If you have forgotten your...

57
NETWORK Menu
Remember that incorrect network settings on this projector 
may cause trouble on the network. Be sure to consult with 
your network administrator before connecting to an existing 
access point on your network.
Select “NETWORK” from the main menu to access the 
following functions. 
Select an item using the ▲/▼ cursor buttons on the projector or remote control, 
and press the ► cursor button on the projector or remote control, or 
ENTER 
button on the remote control to execute the item....

58
NETWORK Menu
NETWORK Menu (continued)
ItemDescription
SETUP
(continued)
IP 
ADDRESS
Use the ▲/▼ /◄/► buttons to 
enter the IP ADDRESS. This 
function can only be used when 
DHCP is set to OFF.
• The IP ADDRESS is the number that identifies this 
projector on the network. You cannot have two devices 
with the same IP ADDRESS on the same network.
• The IP ADDRESS “0.0.0.0” is prohibited.
SUBNET  MASK Use the ▲/▼
/◄/► buttons to 
enter the same SUBNET MASK 
used by your PC. This function 
can only be...