Pioneer Kuro Pro Fpj1 Projector User Manual

11
Getting StartedPreparation Basic Operation Settings Troubleshooting Others
ENGLISH
How to Use the Remote Control
zIf the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out. When this 
happens, replace the batteries.  Insert the batteries according to the +- marks.
zBe sure to insert the - end first.
zIf an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the batteries again and 
operate the...

2Preparation
12
Selecting Connecting Devices
zDo not turn on the power until connection is complete.
zThe connection procedures differ according to the device used. For details, refer to the instruction manual of the device to be 
connected.
zFor audio output, connect the device to an amplifier.
zThe images may not be displayed depending on the devices and cables to be connected.
Use an HDMI compliant cable (sold separately) with the HDMI logo.
zIt may not be possible to connect to this unit depending on...

13
ENGLISH
Getting StartedPreparationBasic Operation Settings Troubleshooting Others
Connecting
zSet “Video Format” in the setting menu to “Component”. (pP26 - Q)
Connecting via Video Cable and S-video Cable
Connecting via Component Video Cable
S-VIDEOHD RS-232C
OMPONENT
VIDEO
SYNCYCB/PBCR/PRGBR
HDRS-232COMPONENT
YCB/PBCR/PRGBR
Video cable (sold separately)
VCR and camcorder Video output To video input terminal This unit
S-video output S-video cable (sold separately)
To S-video input terminal
S-VIDEOHD...

14
Connecting (Continued)
2Preparation
Connecting via HDMI Cable
Connecting via HDMI-DVI Conversion Cable
S-VIDEOHDMI 2 HDMI 1 RS-232C
COMPONENT
VIDEO
SYNCYCB/PBCR/PRGBRS-VIDEO
RS-232CCOMPONENT
VIDEOSYNCYCB/PBCR/PRGBR
CO
HDMI output terminal
HDMI cable (sold separately)DVD recorder
To HDMI 1 or HDMI 2 
input terminal This unit
S-VIDEOMDMI 2 MDMI 1 RS-232C
COMPONENT
VIDEO
SYNCYCB/PBCR/PRGBRS-VIDEO
RS-232CCOMPONENT
VIDEOSYNCYCB/PBCR/PRGBR
CO
Notebook PC
To HDMI 1 or HDMI 2 
input terminal This unit...

15
ENGLISH
Getting StartedPreparationBasic Operation Settings Troubleshooting Others
zSet “Video Format” in the setting menu to “SCART”. (pP26 - Q)
zSet “Video Format” in the setting menu to “RGB”. (pP26 - Q)
zFor information on compatible input signals, see “Specifications”. (pP50)
Connecting via SCART-RCA Cable
Connecting via RGB Video Cable
S-VIDEOHD RS-232C
OMPONENT
VIDEO
SYNCYCB/PBCR/PRGBRS-VIDEO
HDRS-232COMPONENTOMPONENT
SCART-RCA cable
(sold separately)DVD player for European market
To RGB video...

2Preparation
16
Installing the Projector and Screen
Install this unit and the screen. Place this unit and the screen perpendicular to each other. 
Failing to do so may give rise to trapezoidal distortion of the projected image. 
AInstall the projector and screen
80%
34% 34%
80%
S-VIDEOMDMI 2 MDMI 1 RS-232CCOMPONENTVIDEO
SYNCYCB/PBCR/PRGBR
„Left/Right position
*0 % up/down position (center)
„Up/Down position
*0 % left/right position (center)Approximately 34 % (maximum) of the projected image
(Turn the...

17
ENGLISH
Getting StartedPreparationBasic Operation Settings Troubleshooting Others
BAdjust such that the projected image is in the center of the screen
zIt may be necessary to set “Pixel Adjust” in the setting menu after adjusting the image position. (pP25 - J)
Determine the distance from the lens to the screen to achieve your desired screen size.
This unit uses a 2.0x power zoom lens for projection.
„Relationship Between Projection Screen Size and Projection Distance
z
The projection distances in the...

18
3Basic Operation
Projecting Image
.......................................................................Preparation
zRemove the lens cap.
AInsert the power plug to the power outlet
BTurn on the power
CProject the image
aSelect input mode
bPlay back the selected device
DAdjust the position of the projection screen
EAdjust the image size (zoom) and the focus
aDisplay the test pattern (crosshatch)
This section describes the basic operations to project input images on the screen.
zYou can also press the...

19
Getting Started PreparationBasic OperationSettings Troubleshooting Others
ENGLISH
bAdjust the focus
cAdjust the image size (zoom)
dTo end
FTurn off the power
zSwitches between “Focus” and “Zoom” whenever the [ENTER] button is 
pressed.
zThe power cannot be turned off within approximately 90 seconds after it 
has been turned on. Start operation only after 90 seconds time. 
zYou can also press the [STANDBY/ON] button on the unit to turn off the 
power. (pP9)
zPut back the lens cap after use to prevent...

20
3Basic Operation
Convenient Features during Projection
The projected image can be set to a most appropriate screen size (aspect 
ratio). 
z
The screen size can also be set from “Aspect” of the setting menu. (pP27 - S)
zWhen high definition images are input, the “V-Stretch” setting will be available 
instead. (pP27 - T)
zWhen PC signals are input, the “PC Resize” setting will be available instead.       
(pP27 - U)
„Input Image and Projected Image by Different Screen Size Settings
z
Depending on the...