Philips Lx9000r User Manual

							Selecting the recording mode
By selecting a recording mode, you determine the picture
quality of recordings and the maximum of possible
recording time on a disc.
1Switch your TV set on. If necessar y set the TV to the
correct audio/video channel for the DVD recorder system.
Such channels may be called AUX or AUXILIARY IN,
AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN,
etc. These channels are often near channel 00.
2Load a disc on which you want to record in the tray.
3Press DVD/MON on the remote control as often as
necessar y to see the currently selected TV channel.
➜The currently selected TV channel is displayed.
4Press CH+ or CH- on the remote control as often as
necessar y to select the desired TV channel (programme
number) from which you wish to record.
5Press REC MODE repeatedly on the remote control to
select the desired recording mode:
➜HQ,Record mode: HQ: the recording mode
HighQuality offers the best picture quality and a
maximum recording time of 60 minutes.
➜SP,Record mode: SP: The recording mode
StandardPlay offers excellent picture quality
(pre-recorded DVD quality) and a maximum recording
time of 120 minutes.
➜SP+,Record mode: SP+: The recording mode
StandardPlay+ offers a better picture quality than
S-VHS and a maximum recording time of 150 minutes.
➜LP,Record mode: LP: The recording mode LongPlay
offers S-VHS picture quality and a maximum recording
time of 180 minutes.
➜EP,Record mode: EP: The recording mode
ExtendedPlay offers a better picture quality than VHS
and a maximum recording time of 240 minutes.
➜EP+,Record mode: EP+: The recording mode
ExtendedPlay+ offers VHS picture quality and a
maximum recording time of 360 minutes.Selecting the recording mode via the menu
You can also select the desired recording mode via the
system menu.
1Press SYSTEM MENU on the remote control.
2Press 1on the remote control as often as necessar y until
Ais selected.
3Press 4or 3on the remote control as often as necessar y
until zRecord settingsis selected.
4Press 2on the remote control to confirm the selection.
5Press 1or 2on the remote control as often as necessar y
until the desired recording mode in the line Record mode
is selected.
0 0If you selected the recording mode LP,EPor EP+,you
can do an additional setting: Use 4on the remote control
to go to the line Filter mode. Use 1or 2on the remote
control to select either Stndrd(improves the picture
quality for standard contents) or Sport(improves the
picture quality for fast movements).
6Press OK on the remote control to confirm the new setting.
7Press SYSTEM MENU on the remote control to end.
0 0To switch off the system menu bar press SYSTEM MENU
again on the remote control.
Recording
41
English
MENU
REC MODEDISC DISPLAY
CLEAR RETURN EDIT PLAY MODE
TREBLE TIMER
LOUDNESS
BASS SUBWOOFER
REAR
NIGHTVOICE TV VOL
CH VOLMUTE
SELECT
SURR.
+
-
AUDIO DISC
ÉÉ
É
0
OK
H
§
T/C
SURR.
2;∞9
798
SYSTEM
É
 
						

							Automatic recording from a
satellite receiver
This feature can be used only if you own a satellite receiver
that can control other appliances via a scar t cable and a
programming feature (timer). For more information, please
see the instruction manual of the satellite receiver.
1Switch your TV set on. If necessar y set the TV to the
correct audio/video channel for the DVD recorder system.
Such channels may be called AUX or AUXILIARY IN,
AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN,
etc. These channels are often near channel 00.
2Press SYSTEM MENU on the remote control.
3Press 1on the remote control as often as necessar y until
Ais selected.
4Press 4or 3on the remote control as often as necessar y
until zRecord settingsis selected.
5Press 2on the remote control to confirm the selection.
6Press 4or 3on the remote control as often as necessar y
until the line Sat recordis selected.
7Use 1or 2on the remote control to select EXT2.
0
0To switch off automatic recording from a satellite receiver
use 1or 2on the remote control to select Off.
8Press OK on the remote control to confirm the selection.
9Use a scar t cable to connect the corresponding scar t
socket of the satellite receiver with the scar t socket
EXT 2 AUX I/O on the DVD recorder system.
10Press SYSTEM MENU on the remote control to end.
11Load a disc on which you want to record in the tray.
12Programme the satellite receiver for recording (programme
number of the TV channel, star t time, end time). If necessar y,
see the instruction manual of the satellite receiver.
13Press 2on the remote control to switch off the
DVD recorder system.
➜!is displayed and automatic recording from the
satellite receiver is activated.
➜The DVD recorder system is now ready to record. The
beginning and end of the recording is controlled via the
scar t socket EXT 2 AUX I/O.
Recording
42
English
TV
CDR/TAPE
CAM 1/2
CDTUNERSAT
MENUVCR/GAME DVD/MONREC/OTR
SELECTAUDIO DISC
ÉÉ
É
É
0
OK
H
1
3
2
4
6 5
798
SYSTEM
2
ABCDEFG
2 17 off off no off
<
z
yRecord settings
<
2 3
4
 
						

							Direct Record
When you are watching a TV programme with the
DVD recorder system switched to standby you can
instantly star t recording the current TV channel if the
function Direct Recordis switched on. If the status light
INSTANT - RECORD lights up, recording can be star ted
without any delay. If it does not and you star t recording,
please note that the system takes about 20 seconds to
star t the recording.
Switching Direct Record on or off
1Switch your TV set on. If necessar y set the TV to the
correct audio/video channel for the DVD recorder system.
Such channels may be called AUX or AUXILIARY IN,
AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN,
etc. These channels are often near channel 00.
2Press SYSTEM MENU on the remote control.
3Press 1on the remote control as often as necessar y until
Ais selected.
4Press 4or 3on the remote control as often as necessar y
until zRecord settingsis selected.
5Press 2on the remote control to confirm the selection.
6Press 4or 3on the remote control as often as necessar y
until the line Direct Recordis selected.
7Use 1or 2on the remote control to select On.
0
0To switch off direct recording use 1or 2on the remote
control to select Off.
8Press OK on the remote control to confirm the selection.
9Press SYSTEM MENU on the remote control to end.
10Press 2on the remote control to switch the
DVD recorder system to standby.Starting Direct Record
1Make sure the function Direct Recordis switched on.
2Select on the TV the TV channel that you wish to record.
3When the DVD recorder system is switched to standby,
press REC/OTR on the remote control.
➜READINGis displayed and the DVD recorder system
searches the TV channel selected on the TV among its
stored TV channels.
During this search please do not change the
TV channel on the TV.This may affect the tuning of
the DVD recorder system.
➜As soon as the TV channel is found, recording star ts
automatically.
Note: If the DVD recorder system was not able to find the
TV channel selected on the TV among its stored TV channels,
NOTVis displayed. Make sure all TV channels stored on the TV
are available on the DVD recorder system. If necessar y, store
any missing channel. Check if the connectors at both ends of
the scart cable are plugged in correctly and firmly. Check your
TV’s instruction manual to see which scart socket is used for
video signals. If the problem then still persists, this feature is not
available.
4Press STOPÇto stop recording.
Recording
43
English
 
						

							Timer recording allows you to automatically star t and stop
a recording at a later date. The DVD recorder system
switches to the right programme number and star ts
recording at the time entered.
You can pre-programme up to 6 recordings within a period
of one month.
Following information has to be keyed in to make a timer
recording:
–the date of the recording
–the programme number of the TV channel
–the start and stop time of the recording
–VPS/PDC on or off
–the recording mode
This information is saved in a timer block.
VPS and PDC
With Video Programming System and Programme
Deliver y Control the TV station controls the star t and the
duration of recordings. The DVD recorder system switches
itself on and off at the right time even if a TV programme
star ts earlier or ends later than scheduled.
Usually the star t time is the same as the VPS/PDC time.
However, if your TV magazine indicates a time that differs
from the programme’s star t time (e.g. programme star t
20.15 and VPS/PDC 20.14), you have to key in 20.14 as
star t time.
If you want to key in a time that differs from the VPS/PDC
time, you have to switch off VPS/PDC .
Only one TV programme on a TV channel at a time can be
controlled using VPS/PDC . If you like to record two or
more TV programmes on a TV channel by using VPS/PDC,
you have to programme them separately.
NexTView Link
This DVD recorder system is equipped with NexTView Link.
In case your TV set is also equipped with this function, you
can mark TV programmes on the TV for programming.These
TV programmes will be transmitted automatically in the
timer block on the DVD recorder system for recording. If
you clear the marking on the TV, the corresponding timer
block on the DVD recorder system will also be cleared. For
fur ther information, please see the instruction manual of your
TV set.
Note: If the TV station does not send the necessar y signal,
NexTView Linkwill not work.
Timer recording
44
English
 
						

							Programming a recording with
the ShowView®system
You do not need to tediously enter the date, the
programme number, the star t and end time. All information
needed for programming is contained in the ShowView
®
programming number.You can find this number in most of
the TV magazines, indicated next to the star t time of the
TV programme.
1Switch your TV set on. If necessar y set the TV to the
correct audio/video channel. Such channels may be called
AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc. These channels are often near
channel 00.
2Press DVD/MON on the remote control as often as
necessar y to see the currently selected TV channel.
➜The currently selected TV channel is displayed.
3Press CH+ or CH- on the remote control as often as
necessar y to select the desired TV channel (programme
number) from which you wish to record.
4Press TIMER on the remote control.
5Press 4or 3on the remote control as often as necessar y
until the line ShowView systemis selected.
6Press 2on the remote control to confirm the selection.
7Use the numerical keys on the remote control to enter the
ShowView®programming number. This number is up to
9 digits long, e.g. for 5-312-4 or 5 312 4 enter 53124.
0 0To clear, in case you made a mistake, press CLEAR on the
remote control.
0 0If you wish your recording to be repeated, press SELECT
on the remote control as often as necessar y, until the
desired option is selected:
➜Mo-Fr: for recordings to be repeated daily from Monday
to Friday
➜Weekly: for recordings to be repeated weekly (ever y
week on the same day)
8Press OK on the remote control to confirm.
➜The timer programme appears.Notes:
If ShowView number wrongis displayed, the keyed in
ShowView
®programming number is incorrect. Check time and
date on the DVD recorder system. Repeat your entr y correctly
or end programming by pressing SYSTEM MENU.
If Please enter programme numberis displayed, the
programme number of the TV channel has not yet been
allocated to the ShowView
®programming number. Select the
appropriate programme number of the TV channel using 1,2
or the numerical keys on the remote control and confirm by
pressing OK.
If daily recording was entered for a wrong day,Weekend
programming not possibleis displayed. Make sure to
enter a day from Monday to Friday.
0 0To change the timer programme, you can go back at any
time. Use 1or 2to select the appropriate input field. Use
4or 3, or the numerical keys on the remote control to
change the information.
0 0To switch on VPS/PDC press 2on the remote control to
select the line Start. Press SELECT on the remote control
as often as necessar y until 8lights up.
➜VPS/PDC is switched on.
0
0To change the recording mode press 2on the remote
control to select the line End. Press SELECT on the
remote control as often as necessar y until the desired
recording mode is selected.
9Press OK again on the remote control to store the entire
programming information.
➜The entire programming information is stored.
10Press TIMER on the remote control to end.
11Load a disc on which you want to record in the tray.
12Select another source by pressing the corresponding
button on the remote control (TV, TUNER, CD, CDR,
TAPE) or press 2on the remote control to switch off the
DVD recorder system.The timer recording will only
work properly if another source is selected or the
DVD recorder system is switched off with 2.
➜If any recordings are programmed,Xlights up.
45
English
Timer recording
4
Ti m e r
3
#
2
ShowView system2
Timer programming
Timer List
To exit
Press TIMER
#
 
						

							Programming a recording
without the ShowView®system
1Switch your TV set on. If necessar y set the TV to the
correct audio/video channel. Such channels may be called
AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc. These channels are often near
channel 00.
2Press DVD/MON on the remote control as often as
necessar y to see the currently selected TV channel.
➜The currently selected TV channel is displayed.
3Press CH+ or CH- on the remote control as often as
necessar y to select the desired TV channel (programme
number) from which you wish to record.
4Press TIMER on the remote control.
5Press 4or 3on the remote control as often as necessar y
until the line Timer programmingis selected.
6Press 2on the remote control to confirm the selection.
➜The entr y field Dateis selected.
7Use 4,3or the numerical keys on the remote control to
enter the date.
0 0To programme a repeated recording press SELECT on the
remote control as often as necessar y, until the desired
option is selected:
➜Mo-Fr: for recording to be repeated daily from Monday
to Friday
➜e.g.Mo: for recording to be repeated weekly (ever y
week on the same day, e.g. Monday)
8Press 2on the remote control to select the entr y field
Prog..
9Use 4or 3on the remote control to enter the
programme. If you wish to programme recordings from
additional appliances via a scar t socket on the DVD
recorder system select one of the following options:
➜EXT1: Recordings via the scar t socket 1 is selected.
➜EXT2: Recordings via the scar t socket 2 is selected.
10Press 2on the remote control to select the entr y field
Start.
11Use 4,3or the numerical keys on the remote control to
enter the star t time.
0 0To switch on VPS/PDC press SELECT on the remote
control as often as necessar y until 8lights up.
➜VPS/PDC is switched on.
12Press 2on the remote control to select the entr y field End.
13Use 4,3or the numerical keys on the remote control to
enter the time to end.
0 0To change the recording mode press SELECT on the
remote control as often as necessar y until the desired
recording mode is selected.
14Press OK again on the remote control to store the entire
programming information.
➜The entire programming information is stored.
15Press TIMER on the remote control to end.
16Load a disc on which you want to record in the tray.
17Select another source by pressing the corresponding
button on the remote control (TV, TUNER, CD, CDR,
TAPE) or press 2on the remote control to switch off the
DVD recorder system.The timer recording will only
work properly if another source is selected or the
DVD recorder system is switched off with 2.
➜If any recordings are programmed,Xlights up.
Timer recording
46
English
4
Ti m e r
3ShowView system
#
2Timer programming2
Timer List
To exit
Press TIMER
#
 
						

							Checking, changing or deleting a
timer recording
1Switch your TV set on. If necessar y set the TV to the
correct audio/video channel. Such channels may be called
AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc. These channels are often near
channel 00.
2Press TIMER on the remote control.
3Press 4or 3on the remote control as often as necessar y
until the line Timer Listis selected.
4Press 2on the remote control to confirm the selection.
5Press 4or 3on the remote control as often as necessar y
to select the timer recording to be checked, changed or
deleted.
6If you want to check or change the timer recording:
Press 2again on the remote control.
Use 1or 2on the remote control to select the input field
to be checked or changed.
Use 4,3or the numerical keys on the remote control to
change the desired data.
Press OK on the remote control to store the changed data.
If you want to delete the timer recording:
Press CLEAR on the remote control.
➜Clear timeris displayed.
Press OK on the remote control to star t deleting.
➜Timer Clearedis displayed briefly, the programmed
recording data disappear and are replaced by -----.
7Press TIMER on the remote control to end.
8Press 2on the remote control to switch off the
DVD recorder system.
Timer recording
47
English
TV
CDR/TAPE
CAM 1/2
CDTUNERSAT
MENU
REC MODEDISC DISPLAY
CLEAR RETURN EDIT PLAY MODE
TREBLE TIMER
LOUDNESSVCR/GAME DVD/MON
SUBWOOFERTV VOL REC/OTR
CH VOLMUTE
SELECT
SURR.
+
-
AUDIO DISC
ÉÉ
É
É
0
OK
H
§
T/C
SURR.
2;∞9
1
3
2
4
6 5
798
SYSTEM
2
4
Ti m e r
ShowView system
3Timer programming
#
2Timer List2
To exit
Press TIMER
#
 
						

							Editing the name of the recording
After the recording has been made, you can change the
name of the recording.
1Press STOPÇwhen playback is stopped or press
DISC MENU on the remote control during playback.
2Press 4or 3on the remote control as often as necessar y
to select the desired title for editing.
3Press 2on the remote control to confirm the selection.
➜The editing menu appears.
4Press 4or 3on the remote control as often as necessar y
to select the line Name.
5Press 2on the remote control to confirm the selection.
6Use 1or 2on the remote control to move to the
character to be deleted or substituted.
➜The character is highlighted.
7Use 4or 3on the remote control to select a new
character, symbol or number.
0 0To switch between upper and lower case press SELECT on
the remote control.
0 0To delete a character press CLEAR on the remote control.
8Repeat steps 6–7 until the name of the recording is
changed as desired.
9Press OK on the remote control to confirm the new name.
➜Storing nameis displayed.
10Press 1on the remote control to exit the editing menu.
Erasing an entire recording/title
You can erase an entire recording/title from a DVD+RW or
an unfinalised DVD+R. The position of a deleted title on a
DVD+RW can be used for a new recording. However, a
deleted title on a DVD+R is only marked as deleted, but
not physically deleted. This means the deleted title will be
skipped during playback, but no new recording can be
made. Once the DVD+R has been finalised no fur ther
changes can be made.
1Press STOPÇwhen playback is stopped or press
DISC MENU on the remote control during playback.
2Press 4or 3on the remote control as often as necessar y
to select the desired title for erasing.
3Press 2on the remote control to confirm the selection.
➜The editing menu appears.
4Press 4or 3on the remote control as often as necessar y
to select the line Erase this title.
5Press OK on the remote control to confirm.
➜This will completely erase this titleand Press
OK to confirmis displayed.
6Press OK again on the remote control to erase the entire
recording/title.
➜Erasing titleis displayed.
➜Afterwards Empty title(if you inser ted a DVD+RW)
or Deleted title(if you inser ted a DVD+R) is displayed
in the index picture screen.
Note: If the deleted title was shorter than 1 minute Empty
titleor Deleted titlewill not be displayed.
0
0To exit the editing menu without erasing press 1on the
remote control.
Advanced features
48
English
MENU
REC MODEDISC DISPLAY
CLEAR RETURN EDIT PLAY MODE
TREBLE TIMER
LOUDNESS
BASS SUBWOOFER
REAR
NIGHTVOICE TV VOL
CH VOLMUTE
SELECT
SURR.
+
-
AUDIO DISC
ÉÉ
É
0
OK
H
§
T/C
SURR.
2;∞9
798
SYSTEM
ÉSettings for title Philips 1
Name2Philips 1
Play full title
Erase this title42
 
						

							Disc info screen (DVD+R,
DVD+RW discs only)
You can use the disc info screen for the following
proceedings:
–Changing the disc name
–Activating or deactivating the write protection
–Making edits compatible for other DVD players
–Finalising DVD+R discs
–Erasing DVD+RW discs
How to display the disc info screen
1Press STOPÇwhen playback is stopped or press
DISC MENU on the remote control during playback.
2Press 3on the remote control as often as necessar y until
you reach the firsttitle of the disc menu.
3Press 3again on the remote control.
➜The disc info screen appears.
0
0To exit the disc info screen press 4on the remote control.
Changing the disc name (DVD+R,
DVD+RW discs only)
1Press STOPÇwhen playback is stopped or press
DISC MENU on the remote control during playback.
2Press 3on the remote control as often as necessar y until
you reach the firsttitle of the disc menu.
3Press 3again on the remote control.
➜The disc info screen appears.
4Press 2on the remote control.
➜The menu Settings forappears.
5Press 4or 3on the remote control as often as necessar y
to select the line Disc name.
6Press 2on the remote control to confirm the selection.
7Use 1or 2on the remote control to move to the character
to be deleted or substituted.
➜The character is highlighted.
8Use 4or 3on the remote control to select a new
character, symbol or number.
0 0To switch between upper and lower case press SELECT on
the remote control.
0 0To delete a character press CLEAR on the remote control.
9Repeat steps 7–8 until the name of the recording is
changed as desired.
10Press OK on the remote control to confirm the new name.
➜Storing nameis displayed.
11Press 1on the remote control to end.
0
0To exit the disc info screen press 4on the remote control.
Advanced features
49
English
MENU
REC MODEDISC DISPLAY
CLEAR RETURN EDIT PLAY MODE
TREBLE TIMER
LOUDNESS
BASS SUBWOOFER
REAR
NIGHTVOICE TV VOL
CH VOLMUTE
SELECT
SURR.
+
-
AUDIO DISC
ÉÉ
É
0
OK
H
§
T/C
SURR.
2;∞9
798
SYSTEM
É
Settings for My DVD
Disc name2My DVD
ProtectionUnprotected
Erase disc42
 
						

							Activating or deactivating the write
protection (DVD+R, DVD+RW discs
only)
You can prevent a recording on a DVD+RW disc from
accidental erasure by protecting it. However, the protection
can be activated for the entire disc only. An individual
recording cannot be protected. DVD+R discs can be
protected the same way as DVD+RW discs as long as they
are not finalised.
1Press STOPÇwhen playback is stopped or press
DISC MENU on the remote control during playback.
2Press 3on the remote control as often as necessar y until
you reach the firsttitle of the disc menu.
3Press 3again on the remote control.
➜The disc info screen appears.
4Press 2on the remote control.
➜The menu Settings forappears.
5Press 4or 3on the remote control as often as necessar y
to select the line Protection.
6Press 2on the remote control to confirm the selection.
7Press 4or 3on the remote control as often as necessar y
to select either the line:
Unprotected: for deactivating the write protection
Protected: for activating the write protection
8Press OK on the remote control to confirm.
9Press 1on the remote control to end.
0
0To exit the disc info screen press 4on the remote control.
Making edits compatible (DVD+RW
discs only)
If one title or several titles have been edited (chapter
markers have been inser ted or deleted, or chapters have
been hidden) a standard DVD player may still show the
original title.You can prepare your disc in such a way that a
standard DVD player will be able to read the edited title.
1Press STOPÇwhen playback is stopped or press
DISC MENU on the remote control during playback.
2Press 3on the remote control as often as necessar y until
you reach the firsttitle of the disc menu.
3Press 3again on the remote control.
➜The disc info screen appears.
4Press 2on the remote control.
➜The menu Settings forappears.
5Press 4or 3on the remote control as often as necessar y
to select the line Make edits compatible,Press OK.
Note: If your disc is already compatible,Make edits
compatiblewill not be displayed and a conversion is not
needed. To end press SYSTEM MENUon the remote control.
6Press OK on the remote control to confirm.
➜This will takeplus the time needed for this process
and Press OK to confirmare displayed.
7Press OK again on the remote control to star t the process.
➜Workingis displayed and the process is star ted.
➜A bar moving from left to right indicates the current
status of the conver ting progress.
0 0To exit the disc info screen press 4on the remote control.
Advanced features
50
English
Settings for My DVD
Disc nameMy DVD3Protection2Unprotected
Erase disc
Finalise disc24
Settings for My DVD
Disc nameMy DVD
ProtectionUnprotected
Erase disc
3Make edits compatible Press OK2