Philips Lx9000r User Manual

							Connections on the rear
1connect to the supplied speakers
2RADIO / MW
connect to the MW antenna
3RADIO / FM
connect to the FM antenna
4MAINS ~
After all other connections have been made,
connect the mains lead to the wall socket.
5TV ANTENNA / IN 
connect to the TV antenna
6TV ANTENNA / TV OUT 
connect to the TV antenna input of your TV
7EXT 2 / AUX I/O
connect to the SCART socket of an external video
appliance
8EXT 1 / TO TV I/O
connect to the SCART socket of the TV
9LINE IN 1 L/R
connect to the analogue audio output of an external
appliance (e. g. tape deck, CD changer, …)
0LINE IN 2 L/R
connect to the analogue audio output of an external
appliance (e. g. tape deck, CD changer, …)
!LINE OUT L/R
connect to the analogue audio input of an external
appliance (e. g. tape deck, …)
@DIGITAL IN
connect to the digital coaxial output of a digital appliance
#OPTICAL IN
connect to the digital optical output of a digital appliance
$DIGITAL OUT
connect to the digital coaxial input of a digital appliance
Before starting with the connections, make sure all
appliances that you want to connect as well as the
DVD recorder system are disconnected from the
power sockets.
Controls and connections
11
English
TV ANTENNA
IN
TV OUTEXT 2
EXT 1 MW FM
AUX I/0
TO TV I/0
L
RL
RDIGITAL OUT
DIGITAL IN
OPTICAL IN LINE IN 1 LINE IN 2 LINE OUT
MAINS ~RADIO
CENT.
4 Ω
SURR
LEFT
4 Ω
SURR
RIGHT
4 Ω SUB
LEFT
8 Ω FRONT
LEFT
4 Ω
FRONT
RIGHT
4 Ω
SUB
RIGHT
8 Ω
234
5768@#$90!
1
 
						

							Speaker setup
1First, assemble the speakers as described in the supplied
”Quick use guide”.You can place the subwoofers either in
the front or in the rear.
2Place the front left and right speakers at equal distances
from your TV. The distance between the listener´s position
and the front speakers should be approximately equal to
the distance between the two front speakers.
3Place the centre speaker above or below the TV set.
4Place the rear speakers to the left and right of your
preferred listening position.
Notes:
Keep the speakers away from the corners of the room.
Position the speakers at ear level.
Connecting the speakers
Connect the supplied speakers using the supplied speaker
cables. Match the colours of the speaker sockets and the
speaker cables:
Speaker+ +−
−
Front Left white black
Front Right red black
Centre green black
Subwoofer Left violet black
Subwoofer Right violet black
Rear Left blue black
Rear Right grey black
Note: If you placed the subwoofers in the rear, the colours of
the cables will no longer match the speaker sockets on the
subwoofers.
We recommend connecting all speakers. At least the front
speakers and the subwoofers must be connected.
Press down the clip of the speaker and fully inser t the
stripped por tion of the speaker cable into the socket, then
release the clip.
Speaker setup/Connecting …
12
English
front R,
subwoofer R front L,
subwoofer L 
rear L rear Rcentre
 
						

							Connecting the tuner antennas
MW antenna
Assemble the supplied MW loop antenna as shown below
and connect it to RADIO MW.
Notes:
After finishing the hookup and the initial setup, move the
MW antenna in various directions to achieve best reception.
Keep the antenna as far away as possible from the TV, VCR
or other electronic appliances.
For better reception connect an outdoor antenna or a cable
TV system.
The supplied antenna is for indoor use only.
FM antenna
Connect the FM antenna socket of an outdoor FM antenna
or that of your cable TV system to RADIO FM on the DVD
recorder system with the supplied FM antenna cable.
Connecting the TV antenna
1Disconnect the antenna cable from the TV´s antenna input
and connect it to TV ANTENNA IN on the DVD recorder
system.
2Connect TV ANTENNA TV OUT on the DVD recorder
system to the TV´s antenna input with the supplied antenna
cable.If you connect an appliance or change its connection after
the initial installation, you need to “install” it on the DVD
recorder system, i. e. you have to tell the DVD recorder
system to which socket the appliance is connected.
Otherwise the appliance will not be available on the DVD
recorder system. Please see “When adding appliances or
changing the connections of appliances”. This is not
necessar y for appliances connected to CAM 1 and CAM 2.
Connecting the TV
Consult the user´s manuals of your TV on which SCART
sockets are available and how to connect them to other
video appliances.
If several SCART sockets are available on your TV, select
one that is suited for RGB input to achieve the best picture
quality.
If your Philips TV suppor ts EasyLink, please select the
SCART socket number 2 on the TV (EXT2, EXTERNAL 2
or similar) which suppor ts EasyLink.
Connect the TV directly to the DVD recorder system
without a VCR or any other appliance in between.
Otherwise, not all functions of the DVD recorder system
may be available.
1Connect the SCART socket of the TV
(EUROCONNECTOR, EURO-AV or similar) to
EXT 1 TO TV I/O on the DVD recorder system with the
supplied SCART cable.
2If you have a digital TV with a digital audio output, connect
either
– its digital coaxial output to DIGITAL IN on the DVD
recorder system with a digital cinch cable or
– its digital optical output to OPTICAL IN on the DVD
recorder system with a digital optical cable.
Connecting …
13
English
MW
RADIO
TV ANTENNA
IN
TV OUTEXT 2
EXT 1 MW FM
AUX I/0
TO TV I/0L
RL
RDIGITAL OUT
DIGITAL IN
OPTICAL IN LINE IN 1 LINE IN 2 LINE OUT
MAINS ~RADIO
EXT  IN ANTENNA INTV
OPTICAL
OUT
TV ANTENNA
IN
TV OUTEXT 2
EXT 1 MW FM
AUX I/0
TO TV I/0L
RL
RDIGITAL OUT
DIGITAL IN
OPTICAL IN LINE IN 1 LINE IN 2 LINE OUT
MAINS ~RADIO
EXT  IN ANTENNA INTV
OPTICAL
OUT
to antenna, cable TV or VCR
 
						

							Connecting additional video
appliances
You can connect several video appliances with a SCART
socket to EXT2 AUX I/O by connecting them in a “chain”:
In the illustration below, a satellite receiver is connected to
a VCR and the VCR to the DVD recorder system.
Please keep in mind that the appliance closest to the
DVD recorder system will provide the input signal if several
appliances in the chain are switched on. Therefore: When
selecting a video appliance connected to EXT2 AUX I/O,
make sure that all other appliances connected to
EXT2 AUX I/O are switched off or to standby.
Consult the user´s manuals of the video appliances you
wish to connect on which SCART sockets are available and
how to connect them to other video appliances.
1Connect the SCART socket of a video appliance to
EXT2 AUX I/O on the DVD recorder system with a
SCART cable. If the appliance has several SCART sockets,
use the one labelled TO TV or similar.
Note: Use RGB capable SCART cables only. Some other SCART
cables are only partially wired, resulting in a moderate picture
quality and less functionality of the SCART connection.
2Connect another video appliance to the free SCART
socket on the video appliance which is already connected
to the DVD recorder system.
3If a digital video appliance (e. g. satellite receiver or game
console) suppor ts digital surround sound, connect either
– the digital coaxial output of the appliance to DIGITAL IN
on the DVD recorder system with a digital cinch cable,
– the digital optical output of the appliance to
OPTICAL IN on the DVD recorder system with a digital
optical cable.
Connecting additional audio
appliances
Please consult the user´s manual of your audio appliances
on which connections are possible.
Analogue connections
1Connect the left and right analogue output sockets of 
your tape deck, CD player or similar to LINE IN 1 L/R or
LINE IN 2 L/R on the DVD recorder system with an 
audio cinch cable.
Note:You cannot connect a turntable to LINE IN 1or 2.
2Connect the left and right analogue input sockets of a 
tape deck or similar recording appliance to LINE OUT L/R
on the DVD recorder system with an audio cinch cable.
Digital connections
1Connect either
– the digital coaxial output socket of your CD recorder,
CD player or similar to DIGITAL IN on the DVD
recorder system with a digital cinch cable or
– the digital optical output socket of your CD recorder,
CD player or CD changer to OPTICAL IN on the DVD
recorder system with a digital optical cable.
2Connect the digital coaxial input socket of your CD recorder
or similar digital recording appliance to DIGITAL OUT on
the DVD recorder system with a digital cinch cable.
Note:DIGITAL OUTprovides digital 2-channel stereo sound.
The DVD recorder system converts digital multichannel sound
into 2-channel stereo sound without loss of relevant sound
information.
Connecting …
14
English
TV ANTENNA
IN
TV OUTEXT 2
EXT 1 MW FM
AUX I/0
TO TV I/0L
RL
RDIGITAL OUT
DIGITAL IN
OPTICAL IN LINE IN 1 LINE IN 2 LINE OUT
MAINS ~RADIO
EXT. IN
TO TV
TO TV
OPTICAL
OUT TV OUT
ANTENNA
EXT  IN ANTENNA IN
VCR
SAT ReceiverTV
TV ANTENNA
IN
TV OUTEXT 2
EXT 1 MW FM
AUX I/0
TO TV I/0L
RL
RDIGITAL OUT
DIGITAL IN
OPTICAL IN LINE IN 1 LINE IN 2 LINE OUT
MAINS ~RADIO
CD player
L L
R
DIGITAL OUT
Tape deckOUTIN
R
 
						

							Connecting a camcorder to
CAM 1 or CAM 2
You can connect 2 camcorders to the connections CAM 1
and CAM 2. The picture quality depends on the type of
connection between the camcorder and the DVD recorder
system:
– good quality: Composite Video (Video CVBS)
– better quality: S-Video
– best quality: i.Link (IEEE 1394, Fire Wire)
Select the best connection available. Only one video
connection between the DVD recorder system and the
camcorder is needed.
1Open the flap on the front of the DVD recorder system.
2Connect the camcorder to CAM 1 or CAM 2 following the
instructions in the user´s manual of your camcorder.
Note: If the camcorder connected to CAM 1has mono 
sound only, connect the audio output of the camcorder to
CAM 1 AUDIO RIGHTon the DVD recorder system.
Connecting headphones
Connect the headphones with an 3.5 mm plug to PHONES
on the DVD recorder system.
➜The speakers are switched off automatically. Sound will
be reproduced through the headphones only.
Note: With connected headphones, no surround sound is
available. If you press SURROUND,DISCONNECT
HEADPHONESwill be scrolled on the display of the DVD
recorder system.
Mains
The type plate is located on the rear of the set.
1Check whether the mains voltage as shown on the type
plate corresponds to your local mains voltage. If it does not,
consult your dealer or ser vice organisation.
2Make sure your TV is switched on before connecting the
DVD recorder system to the mains supply for the first time.
3Make sure all connections have been made before
connecting the DVD recorder system to the mains
supply.
4Connect the supplied mains cable to AC MAINS ~ and to
the wall socket.
When the set is switched to standby, it is still consuming
some power.To disconnect the set from the mains
completely, remove the mains plug from the wall
socket.
To avoid overheating of the set a safety circuit has
been built in.Therefore your set may disconnect
under extreme conditions. If this happens, switch the
set off and let it cool down before reusing it.
When you connect the DVD recorder system to the mains
supply for the first time, you need to perform some basic
settings. See “Initial  installation”.
Connecting …
15
English
S-VideoVideo, CVBS,
Composite Video i.Link
(IEEE 1394, Firewire,…)
 
						

							During the initial installation, you will perform some basic
settings of the DVD recorder system.You can change all
settings of the initial installation later on. To change these
settings please see the chapters of “System settings” and
tPictureand uLanguagein “User  preferences”.
Basic settings
Please obser ve the screen of your TV and the display of the
DVD recorder system.
1Switch on your TV.
2Connect the supplied mains cable to AC MAINS ~ and to
the wall socket. If the DVD recorder system is in demo
mode, press 2to cancel the demo mode.
➜IS TV ON?is displayed on the DVD recorder system.
3If necessar y set the TV to the correct audio/video channel
for the DVD recorder system. Such channels may be called
AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc. These channels are often near
channel 00.
Note: If your TV supports EasyLink, the TV and the DVD
recorder system exchange information via the SCART cable.
In this case,EasyLink loading data from TV, please
waitwill appear on the TV. Some of the following settings will 
be done automatically then.
4➜The menu Menu Languageappears on the TV screen.
Press 3or 4to select the language in which the display
messages should appear on the TV screen. Then press OK.
5➜The menu Audio languageappears.
Press 3or 4to select the language in which DVDs should
preferably be played, if the language is available on the disc.
Then press OK.
6➜The menu Subtitle Languageappears.
Press 3or 4to select the language in which subtitles
should preferably be displayed, if subtitles in the language
are available on the disc. Then press OK.
Note: Some DVDs may override your audio and subtitle
language selection. In this case, you have to select the audio
and subtitle language in the DVDs Disc Menu.
7➜The menu TV Shapeappears.
Press 3or 4to select the screen format. This setting will
have an effect only with DVDs suppor ting different screen
formats.
➜4:3 letterbox: for a wide-screen picture (cinema
format) on a conventional 4:3 TV set with black borders
at the top and bottom of the screen.
➜4:3 panscan: for a full-height picture with cropped
edges.
➜16:9: for a wide-screen TV set.
Then press OK.
8➜The menu Countryappears.
Press 3or 4to select the countr y where the
DVD recorder system is used. If your countr y does not
appear, select Other. Then press OK.
9➜If you have connected the antenna - press OK
appears.
If you connected the DVD recorder system to a TV antenna
or a cable TV system, press OK.
If not, connect the antenna as described in “Connecting 
the TV antenna”, then press OK.
➜Searching for TV channelsappears and the
automatic search for TV channels star ts. This may take
several minutes. As soon as the search is complete,
Autom. search completeappears.
10➜Time,Year,Monthand Dateappear.
If the settings are correct continue with step 13, else press 4
repeatedly to select either Time,Year,Monthor Date.
11Press 1or 2or 0–9 repeatedly to set the correct value.
12If necessar y, repeat steps 10 and 11 until all settings of the
time and date are correct.
13Press OK.
➜CONTINUE WITH SPECIAL AUDIO SETTINGSis
scrolled on the DVD recorder system.
14Continue with “Advanced settings”.
Initial installation
16
English
TV
CDR/TAPE
CAM 1/2
CDTUNERSAT
MENUVCR/GAME DVD/MONREC/OTR
SELECTAUDIO DISC
É
É
0
OK
H
1
3
2
4
6 5
798
SYSTEM
2
É
É
 
						

							Advanced settings
You will be asked 
– about the distances between the speakers and your
preferred listening position and 
– to which input sockets on the DVD recorder system you
connected other appliances.
If you want to skip the advanced settings and to use
standard settings for the speaker distances and the
connections (see “Quick use guide”):
Press 4to select NO, and continue with step 11 below.
If you want to continue with the advanced settings:
Press OK.
➜SPEAKER DISTANCESis scrolled.
1➜FRONTand 3,0Mare displayed.
Press 3or 4repeatedly to set the distance of your
preferred listening position to the front speakers.
Then press OK to confirm.
2➜CENTERand 3,0Mare displayed.
Repeat step 1 for the centre speaker.
3➜REARand 1,5Mare displayed.
Repeat step 1 for the rear speakers.
➜SOURCE SETUPis scrolled.
4➜DIGITAL AUDIO FROM TV?is scrolled.
Press 4repeatedly to select 
➜NOif there is no digital audio connection between the TV
and the DVD recorder system,
➜DIGif you connected the TV´s digital coaxial output to
DIGITAL IN on the DVD recorder system,
➜OPTif you connected the TV´s digital optical output to
OPTICAL IN on the DVD recorder system.
Press OK to confirm.
5➜VCR CONNECTED?is scrolled and YESis displayed.
If you did not connect a VCR to the DVD recorder
system:
Press 4to select NO, then press OK.
If you connected a VCR:
Press OK.
➜WHICH INPUT?is scrolled.
Press 4repeatedly to select 
➜EXT2if you connected the VCR to EXT 2 AUX I/O or
➜EXT1if you connected the VCR to EXT 1 TO TV I/O on
the DVD recorder system.Press OK to confirm.
➜DIGITAL AUDIO?is scrolled.
Press 4repeatedly to select 
➜NOif there is no digital audio connection between the
VCR and the DVD recorder system,
➜DIGif you connected the digital coaxial output of the
VCR to DIGITAL IN on the DVD recorder system,
➜OPTif you connected the digital optical output of the
VCR to OPTICAL IN on the DVD recorder system.
Press OK to confirm.
6➜SAT CONNECTED?is scrolled and YESis displayed.
Repeat step 5 for a satellite receiver.
7➜GAME CONNECTED?is scrolled and YESis displayed.
Repeat step 5 for a game console.
8➜CD CONNECTED?is scrolled and YESis displayed.
If you did not connect a CD player to the DVD
recorder system:
Press 4to select NO, then press OK.
If you connected a CD player:
Press OK.
➜WHICH INPUT?is scrolled.
Press 4repeatedly to select 
➜LIN1or LIN2if you connected the analogue audio
output of the CD player to LINE IN 1 or LINE IN 2 on
the DVD recorder system,
➜DIGif you connected the digital coaxial output of the
CD player to DIGITAL IN on the DVD recorder system,
➜OPTif you connected the digital optical output of the
CD player to OPTICAL IN on the DVD recorder
system.
Press OK to confirm.
9➜CDR CONNECTED?is scrolled and YESis displayed.
Repeat step 8 for a CD recorder or similar.
10➜TAPE CONNECTED?is scrolled and YESis displayed.
Repeat step 8 for a tape deck or similar.
➜SOURCE SETUP COMPLETEis scrolled.
11Press OK.
➜AUTOINSTALLis displayed. The DVD recorder system
searches for available radio stations and stores them in its
memor y.
➜After the search INSTALLATION COMPLETEis
scrolled and a radio station is played. The DVD recorder
system is ready to play.
Initial installation
17
English
 
						

							When adding appliances or
changing the connections of
appliances
If you have connected additional appliances or changed the
connections after the initial installation, you need to tell the
DVD recorder system to which socket on the rear of the
DVD recorder system the appliance is connected.
After changing the connection of the TV 
e
1Press AUDIO MENU to enter the audio menu.
2Press 4repeatedly to select INPUTS, then press 2.
3Turn SOURCE on the DVD recorder system or keep TV on
the remote control pressed for 1 second.
➜eand AUDIO ->are displayed.
4Press 4repeatedly to select
➜EXT1if you connected the TV to EXT 1 only 
(no digital audio connection between the TV and the
DVD recorder system),
➜DIGif you connected the digital coaxial output of the TV
to DIGITAL IN,
➜OPTif you connected the digital optical output of the TV
to OPTICAL IN on the DVD recorder system.
5Press OK to store the setting.
6Press AUDIO MENU to exit the audio menu.After changing the connections of the VCR 
j,
satellite receiver 
ior game console r
1Press AUDIO MENU to enter the audio menu.
2Press 4repeatedly to select INPUTS, then press 2.
3Turn SOURCE on the DVD recorder system or use the
source keys on the remote control to select the VCR,
satellite receiver or game console.
➜AVAILABLEand YESor NOare displayed.
4If the appliance is not connected to the
DVD recorder system:
Press 4repeatedly to select NO, then press OK.
➜STOREDis displayed.
If the appliance is connected to the DVD recorder
system:
Press 4repeatedly to select YES, then press OK.
➜VIDEO ->is displayed.
Press 4repeatedly to select 
➜EXT1if you connected the appliance to EXT 1,
➜EXT2if you connected the appliance to EXT 2,
➜NONEif you did not connect the appliance to EXT 1 or
EXT 2 on the DVD recorder system.
Press OK to confirm.
➜AUDIO ->is displayed.
Press 4repeatedly to select either
➜EXT1or EXT2if you connected the appliance to EXT 1
or EXT 2 only (no digital audio connection between the
appliance and the DVD recorder system),
➜LIN1or LIN2if you connected the audio output of 
the appliance to LINE IN 1 or LINE IN 2 (available only if
you selected VIDEO ->NONE),
➜DIGif you connected the digital coaxial output of the
appliance to DIGITAL IN,
➜OPTif you connected the digital optical output of the
appliance to OPTICAL IN on the DVD recorder system.
Press OK to store the settings.
➜STOREDis displayed.
5Press AUDIO MENU to exit the audio menu.
System settings
18
English
TV
CDR/TAPE
CAM 1/2
CDTUNERSAT
MENUVCR/GAME DVD/MONREC/OTR
SELECTAUDIO DISC
É
É
0
OK
H
1
3
2
4
6 5
798
SYSTEM
2
É
É
 
						

							After changing the connections of the
CD recorder 
p, CD player qor tape deck k
1Press AUDIO MENU to enter the audio menu.
2Press 4repeatedly to select INPUTS, then press 2.
3Turn SOURCE on the DVD recorder system or use 
the source keys on the remote control to select either 
the CD recorder, CD player or tape deck.
➜AVAILABLEand YESor NOare displayed.
4If the appliance is not connected to the
DVD recorder system:
Press 4repeatedly to select NO, then press OK.
➜STOREDis displayed.
If the appliance is connected to the DVD recorder
system:
Press 4repeatedly to select YES, then press OK.
➜AUDIO ->is displayed.
Press 4repeatedly to select
➜LIN1or LIN2if you connected the analogue audio
output of the appliance to LINE IN 1 or LINE IN 2,
➜DIGif you connected the digital coaxial output of the
appliance to DIGITAL IN,
➜OPTif you connected the digital optical output of the
appliance to OPTICAL IN on the DVD recorder system.
Press OK to store the settings.
➜STOREDis displayed.
5Press AUDIO MENU to exit the audio menu.
When changing the speaker
setup
If you have connected, disconnected or moved the speakers
after the initial installation, you need to change the speaker
settings.
Setting which speakers are connected
1Press AUDIO MENU to enter the audio menu.
2Press 4repeatedly to select LS SETUP, then press 2.
3Press 4repeatedly to select
➜CNTR LS: the centre speaker or 
➜REAR LS: the rear speakers.
4Then press 2.
5Press 4repeatedly to select 
➜YESif the selected speaker type is connected or 
➜NOif the selected speaker type is not connected.
6Press OK to store the setting or 1to exit without storing.
0
0If necessar y, repeat steps 3–6 for the other speaker type.
7Press AUDIO MENU to exit the audio menu.
Setting the distance of your listening position to
the speakers
1Press AUDIO MENU to enter the audio menu.
2Press 4repeatedly to select LS DIST, then press 2.
3Press 4repeatedly to select
➜DIST FRNT: distance to the front speakers,
➜DIST CNTR: distance to the centre speaker or 
➜DIST REAR: distance to the rear speakers.
4Then press 2.
5Press 3or 4repeatedly to set the distance of your
listening position to the speakers (from 1 to 10 meters).
6Press OK to store the setting or 1to exit without storing.
0
0To set the distance to another speaker type, repeat steps
3–6.
7Press AUDIO MENU to exit the audio menu.
System settings
19
English
 
						

							Searching TV  channels
1Switch your TV set on. If necessar y set the TV to the
correct audio/video channel for the DVD recorder system.
Such channels may be called AUX or AUXILIARY IN,
AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN,
etc. These channels are often near channel 00.
2Press SYSTEM MENU.
3Press 1repeatedly to select A.
4Press 4repeatedly to select yInstallation, then press 2.
5Press 4repeatedly to select either
➜Autom. Search: to search for TV channels automatically,
➜Manual search: to add additional or missing TV channels
manually.
Note: If your TV supports EasyLink, please add new TV channels
on your TV first. Then select Autom. Searchto transfer the
changes to the DVD recorder system. Some of the menu options
below will not be available with EasyLink.
6Press 2to enter the selected menu.Autom. Search
Select Autom. Searchif new TV channels are available
with your antenna or cable TV system. All previously stored
TV channels will be overwritten.
1Press 2to star t the automatic search.
➜Searching for TV channelsand xx Channels
foundappear, where xxindicates the number of 
TV channels found.
2After the search is complete, press SYSTEM MENU to exit.
Note: If your TV supports EasyLink the TV channels will be
stored in the same order as on your TV.
Manual search
If not all available TV channels have been found during the
initial installation, you can search for the missing TV channels
manually.
1➜Channel/freq.is highlighted.
Press 2repeatedly to select 
➜CHor S-CHif you want to enter the channel number,
➜Freq.if you want to enter the frequency of the TV
channel.
2Press 4to select Entry/search.
3Press 0–9 repeatedly to enter the channel number or 
the frequency of the desired TV channel.
0 0If you do not know the channel number or frequency,
press 2to star t automatic search. Repeat this step until 
the desired TV channel is found.
4Press 4to select Programme number.
5Press 0–9 or 3or4repeatedly to enter the programme
number where to store the TV channel.
Note: If Programme number already usedappears on
the TV screen, select another programme number. Otherwise
the TV channel with the same programme number will be
deleted.
6Press OK to store the new TV channel or SYSTEM MENU
to exit without storing the changes.
7Press SYSTEM MENU to exit the system menu.
System settings
20
English
TV
CDR/TAPE
CAM 1/2
CDTUNERSAT
MENUVCR/GAME DVD/MONREC/OTR
SELECTAUDIO DISC
É
É
0
OK
H
1
3
2
4
6 5
798
SYSTEM
2
É
É