Philips Lx9000r User Manual

Access control
61
English
Changing the country code
(DVD-Video discs only)
The set filter values depend on the respective countr y.
Therefore it is necessar y to enter the countr y in which you
live.
1Switch your TV set on. If necessar y set the TV to the
correct audio/video channel. Such channels may be called
AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc. These channels are often near
channel 00.
2Press2to switch on the DVD recorder system.
3Press SYSTEM MENU on the remote...

WARNING
Under no circumstances should you try to repair the set yourself as this
will invalidate the guarantee. Do not open the set as there is a risk of
electric shock.
If a fault occurs, first check the points listed before taking the set for
repair. If you are unable to solve a problem by following these hints,
consult your dealer or service centre.
Laser safety
This unit employs a laser. Only a qualified service person should remove
the cover or attempt to service this device, due to possible eye...

Problem Solution
Does not play back – Make sure there is a recording on the disc.
– Make sure the disc is not scratched or dir ty. Replace or clean the disc.
– Make sure the disc has been inser ted, printed side up.
– Check if the right disc type has been inser ted: DVD-Video disc, DVD-R(W),
(Super) Video CD, Audio CD, CDR(W), MP3-CD or DVD+R(W)
– Make sure the region code of the DVD disc matches the DVD recorder system.
– Parental Control is switched on, see chapter “Access control”.
– Make sure the...

Problem Solution
The picture is distorted or – The TV system of the inser ted disc does not match the TV system of your TV 
black-and-white during playback (PAL/NTSC).
– Switch the following setting in the system menu:tPicture- SCART 
video- switch to RGB
No sound signal at the digital output – Check if the sound settings match the selected inputs and the connected 
additional appliances.
– If you inser ted an MP3-CD, the digital output is switched off during playback.
This is in accordance with the SDMI...

Problem Solution
Does not play back – Make sure there is a recording on the disc.
– Make sure the disc is not scratched or dir ty. Replace or clean the disc.
– Make sure the disc has been inser ted, printed side up.
– Check if the right disc type has been inser ted: DVD-Video disc, DVD-R(W),
(Super) Video CD, Audio CD, CDR(W), MP3-CD or DVD+R(W)
– Make sure the region code of the DVD disc matches the DVD recorder system.
– Parental Control is switched on, see chapter “Access control”.
– Make sure the...

66
 

67
 

VieChrEvS0321
English
Meet Philips at the Internet
http://www. philips.com
CLASS 1
LASER PRODUCT
LX9000R
3103 306 1916.2
W