Philips Lx9000r User Manual

Selecting the recording mode
By selecting a recording mode, you determine the picture
quality of recordings and the maximum of possible
recording time on a disc.
1Switch your TV set on. If necessar y set the TV to the
correct audio/video channel for the DVD recorder system.
Such channels may be called AUX or AUXILIARY IN,
AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN,
etc. These channels are often near channel 00.
2Load a disc on which you want to record in the tray.
3Press DVD/MON on the remote...

Automatic recording from a
satellite receiver
This feature can be used only if you own a satellite receiver
that can control other appliances via a scar t cable and a
programming feature (timer). For more information, please
see the instruction manual of the satellite receiver.
1Switch your TV set on. If necessar y set the TV to the
correct audio/video channel for the DVD recorder system.
Such channels may be called AUX or AUXILIARY IN,
AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN,
etc. These...

Direct Record
When you are watching a TV programme with the
DVD recorder system switched to standby you can
instantly star t recording the current TV channel if the
function Direct Recordis switched on. If the status light
INSTANT - RECORD lights up, recording can be star ted
without any delay. If it does not and you star t recording,
please note that the system takes about 20 seconds to
star t the recording.
Switching Direct Record on or off
1Switch your TV set on. If necessar y set the TV to the...

Timer recording allows you to automatically star t and stop
a recording at a later date. The DVD recorder system
switches to the right programme number and star ts
recording at the time entered.
You can pre-programme up to 6 recordings within a period
of one month.
Following information has to be keyed in to make a timer
recording:
–the date of the recording
–the programme number of the TV channel
–the start and stop time of the recording
–VPS/PDC on or off
–the recording mode
This information is saved...

Programming a recording with
the ShowView®system
You do not need to tediously enter the date, the
programme number, the star t and end time. All information
needed for programming is contained in the ShowView
®
programming number.You can find this number in most of
the TV magazines, indicated next to the star t time of the
TV programme.
1Switch your TV set on. If necessar y set the TV to the
correct audio/video channel. Such channels may be called
AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or...

Programming a recording
without the ShowView®system
1Switch your TV set on. If necessar y set the TV to the
correct audio/video channel. Such channels may be called
AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc. These channels are often near
channel 00.
2Press DVD/MON on the remote control as often as
necessar y to see the currently selected TV channel.
➜The currently selected TV channel is displayed.
3Press CH+ or CH- on the remote control as often as
necessar y to select...

Checking, changing or deleting a
timer recording
1Switch your TV set on. If necessar y set the TV to the
correct audio/video channel. Such channels may be called
AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc. These channels are often near
channel 00.
2Press TIMER on the remote control.
3Press 4or 3on the remote control as often as necessar y
until the line Timer Listis selected.
4Press 2on the remote control to confirm the selection.
5Press 4or 3on the remote control as often...

Editing the name of the recording
After the recording has been made, you can change the
name of the recording.
1Press STOPÇwhen playback is stopped or press
DISC MENU on the remote control during playback.
2Press 4or 3on the remote control as often as necessar y
to select the desired title for editing.
3Press 2on the remote control to confirm the selection.
➜The editing menu appears.
4Press 4or 3on the remote control as often as necessar y
to select the line Name.
5Press 2on the remote control to confirm...

Disc info screen (DVD+R,
DVD+RW discs only)
You can use the disc info screen for the following
proceedings:
–Changing the disc name
–Activating or deactivating the write protection
–Making edits compatible for other DVD players
–Finalising DVD+R discs
–Erasing DVD+RW discs
How to display the disc info screen
1Press STOPÇwhen playback is stopped or press
DISC MENU on the remote control during playback.
2Press 3on the remote control as often as necessar y until
you reach the firsttitle of the disc menu....

Activating or deactivating the write
protection (DVD+R, DVD+RW discs
only)
You can prevent a recording on a DVD+RW disc from
accidental erasure by protecting it. However, the protection
can be activated for the entire disc only. An individual
recording cannot be protected. DVD+R discs can be
protected the same way as DVD+RW discs as long as they
are not finalised.
1Press STOPÇwhen playback is stopped or press
DISC MENU on the remote control during playback.
2Press 3on the remote control as often as...