Philips Hts3578 User Manual

							31
Note
  You may require longer time to display the disc   •
content on the T V due to the large number of 
songs/photos compiled onto one disc.
   
If the JPEG photo is not recorded with an ‘exif ’ 
  •
type  le, the actual thumbnail picture is not be 
shown on the display. It is replaced by a ‘blue 
mountain’ thumbnail picture.
   
This Home Theater System can only display 
  •
digital camera pictures according to the JPEG -
E XIF format, typically used by almost all digital 
cameras. It cannot display Motion JPEG and 
pictures in formats other than JPEG, or sound 
clips associated with pictures.
   
Folders/ les that exceed the suppor ted limit of 
  •
this Home Theater System are not displayed 
or played.
Control photo play
1  Play photo slideshow.
2  Use the remote control to control the 
photo. 
Button  Action
 
  
Skips to the previous photo.
   
 
Skips to the nex t photo.
   
 
Rotates the photo clock wise.
   
 
Rotates the photo anti-
clockwise.
   
ZOOM 
Zooms in or out of the 
picture.
   
Play pause in zoom mode.
   
 
Stops play.
   
 
 
 
Play photo
Play photo as slideshow
 
 
This Home Theater System can play JPEG 
photos ( les with .jpeg or .jpg ex tensions).
1  Inser t a disc or USB that contains the 
JPEG photos.
2 Press  DISC 
 or  USB 
.
   
 
 
Slideshow begins (for Kodak disc) or    »
a contents menu (for JPEG disc) is 
displayed.
3  Select the folder/album you want to play.
   
 
 
To preview the photos in the folder/ • 
album, press  
   
 INFO 
.
   
 
 
To go to previous or nex t screen  • 
display, press  
   /   
.
   
 
 
To select a photo, press the  • 
  Navigation buttons 
.
   
 
 
To display the selected photo only,  • 
press  OK 
.
4 Press   
 to star t slideshow play.
   
 
 
To return to the menu, press  • 
 
   
 BACK 
.
EN
Play
English
 
						

							32
Play from USB device
   
This Home Theater System plays/views MP3, 
WMA, DivX (Ultra) or JPEG  les on the 
following USB devices:
   
 
 
digital camera that complies with the PTP  • 
standard
   
 
 
 ash drive • 
   
 
 
memory card reader • 
   
 
 
HDD (ex ternal power source needed) • 
1  Connect a USB device to the   
 
 (USB) 
 
jack.
2 Press  USB 
.
   
 
 
A contents menu is displayed.   »
3  Select a  le to play, then press   
.
   
 
 
Play star ts.   »
   
 
 
 
 
 
 
To stop play, press  • 
 
 or remove the 
USB device.
Note
  If the device does not  t into the USB jack ,   •
connect it through a USB ex tension cable.
   
If you connect a multiple USB card/device 
  •
reader, only one card/device can be accessed. 
 
 
 
 
 
 
/
Play musical slideshow
 
 
Play MP3/ WMA music  les and JPEG 
photo  les simultaneously to create musical 
slideshow. The MP3/ WMA and JPEG  les 
must be stored on the same disc or USB 
device.
1  Play MP3/ WMA music. 
2  Navigate to the photo folder/album and 
press  OK 
 to star t slideshow play.
   
 
 
Slideshow begins and continues till the    »
end of the photo folder or album. 
   
 
 
Audio continues to play till the end of    »
the disc.
   
 
 
 
 
 
 
To stop slideshow play, press  • 
 
.
   
 
 
To stop music play, press   • 
 
 again.
EN
 
						

							33
Play from radio
   
Check if the FM antenna has been connected 
to this Home Theater System. If not, connect 
the supplied FM antenna to the  FM75 
 
 
 jack 
and  x its ends to the wall.
Tip
  For bet ter FM stereo reception, connect an   •
ex ternal FM antenna (not supplied).
   
Position the antenna as far away as possible 
  •
from your T V, VCR or other radiation source 
to prevent interference.
First time tuning
   
When you access to radio mode for the  rst 
time, follow the instructions to install the radio 
stations. 
1 Press  RADIO 
.
   
 
 
’AUTO INSTALL ... PRESS PLAY’ is    »
displayed. 
2 Press    .
   
 
 
All detected radio stations are stored.   »
   
 
 
Once complete, it tunes to the  rst    »
preset radio station.
   
 
 
 
 
 
 
To stop auto tuning, press   • 
 
.
Note
 
This Home Theater System can store up to a   •
maximum of 40 radio stations.
   
If auto installation is not activated or less 
  •
than 5 radio stations are stored, you will be 
prompted to install the radio stations again.
FM (75 Ω)  ANTENNA
Play from portable media 
player
   
Simply connect your por table media player (e.g. 
MP3 player) to this Home Theater System to 
enjoy superb sound quality from your music 
collections.
1  Connect a 3. 5mm stereo audio cable 
(not supplied) from the  MP3 LINK 
 jack 
on this Home Theater System to the 
‘headphone’ jack on the por table media 
player.
2 Press  AUDIO SOURCE 
 repeatedly until 
‘MP3 LINK’ is displayed.
3  Star t play on your por table media player.
   
 
 
To stop play, press   • STOP 
 on the 
por table media player.
Note
  Control playback is only possible on the   •
por table media player.
   
Stop play on the por table media player before 
  •
you switch to other play media /source.
 
 
 
 
 
 
MP3
EN
Play
English
 
						

							34
Search and store radio stations 
individually
1 Press  RADIO 
.
2 Press   
 /   
.
   
 
 
It star ts searching until a radio station    »
is detected.
3  Repeat step 2 until you tune to the radio 
station you wish to store.
   
 
 
To  netune the radio frequency,  • 
press  
   /   
.
4 Press  PROGRAM 
.
   
 
 
The preset station number blinks.   »
   
 
 
If no action is carried out within 20    »
seconds after the above step, it exits 
the preset mode.
5 Press     /  
 (or the  Numeric buttons 
) to 
select a preset number to store.
6 Press  PROGRAM 
 to con rm.
Listen to radio
1 Press  RADIO 
.
2  Use the remote control to control the 
radio. 
Button  Action
 
  
  
Selects a preset radio station.
   
 
  
Tunes the radio frequency up or 
down.
   
 
Press and hold this button to 
erase the current radio station 
from the preset list.
   
The preset number for other 
radio stations remain unchanged.
Reinstall all the radio stations
1 Press  RADIO 
.
2  Press and hold  PROGRAM 
 for more than 
5 seconds.
   
 
 
All previously stored radio stations are    »
replaced.
Note
  Check the radio antenna connection if no   •
stereo signal is detected or less than 5 stations 
are detected during radio installation.
   
 
 
 
EN
 
						

							35
5 Press     to access the  [TRACK] 
 panel.
6  Select the audio track, then press  OK 
.
   
 
 
To select another track, repeat step  • 
6.
   
 
 
To select all tracks, select   • [Select 
All] 
 in the menu and press  OK 
. 
   
 
 
To deselect all tracks, select  • 
  [Deselect all] 
 in the menu and press 
  OK 
.
7 Select  [Start] 
 in the menu to conver t, 
then press  OK 
. 
   
 
 
Once complete, a new folder is    »
created automatically in the USB 
device to store all the new MP3  les.
   
 
 
 
 
 
 
To exit the menu, select   • [Exit] 
 and 
press  OK 
.
Note
 
While you conver t, do not press any but tons.   •
 
 
DTS CDs and copy-protected CDs cannot be   •
conver ted.
   
Write-protected or password-protected USB 
  •
devices cannot be used to store MP3  les. 
6 Advanced 
features
Create MP3 audio fi les
   
You can conver t audio CDs into MP3 audio 
 les with this Home Theater System. The 
created MP3 audio  les are saved in your USB 
device.
Option  Description
 
 
[Speed] 
Selects the write-to- le speed.
   
If  [Normal] 
 speed is selected, 
music play can be heard while 
creating the MP3  le.
   
[Bitrate] 
Selects the quality level. Higher 
bitrate for better sound quality 
and bigger  le size.
   
Default setting is  [128kbps] 
.
1  Inser t an audio CD. (CDDA /HDCD)
2  Connect the USB  ash drive to   
 
(USB) jack on this Home Theater System.
3  During disc play, press  CREATE MP3 
. 
4  Select the conversion options in the 
  [OPTIONS] 
 panel, then press  OK 
.
CREATE MP3
OPTIONSTRACK
Bitrate         128kbps
SUMMARY
Select Track     0
              
Start ExitSelect All
Deselect All
Time                 00:00Track01          04:14
Track02          04:17
Track03          03:58
Track04          04:51
Track05          03:53
Track06          04:09
Track07          04:38 
Speed         Normal
Advanced features
English
EN
 
						

							36
Select a preset sound
1 Press  SOUND 
 repeatedly to select the 
sound effect that most suitable for the 
video or music you play.
Video/Music   Description
 
 
ACTION 
 / 
  ROCK  Enhance low and high 
range for great sounding 
movie effects and 
atmosphere. Great for 
action movies and rock /
pop music.
   
CONCERT 
 
 
/ 
  CLASSIC  Flat and pure sound 
mode. Ideal for listening 
to classical music and 
watching live concer t 
disc.
   
DRAMA 
 / 
  JAZZ  Clear mid and high 
range. Recreates the 
atmosphere of a live club 
with the ar tist just in 
front of you. Good for 
jazz music and watching 
dramas.
   
SPORTS 
Moderate mid range 
and surround effects 
for clear vocals and the 
atmosphere of a live 
spor ts venue. It is also 
ideal for video gaming.
   
NIGHT 
Dynamically controlled 
sound mode suitable 
for watching movies at 
night or for nonintrusive 
background music.
7 Adjust sound
Control the volume
1 Press  VOL +/- 
 to increase or decrease 
the volume.
   
 
 
To mute, press   • 
 
.
   
 
 
To restore the volume, press   • 
 
 again 
or press  VOL + 
.
Select surround sound
1 Press  SURR 
 repeatedly to select the best 
surround output that’s available on the 
disc.
Option  Description
 
 
5 CH 
STEREO  Enhances the stereo channel 
output by duplicating the 
sound output to the center 
and rear speakers. Ideal for 
par ty music.
   
MULTI-
CHANNEL/
DPLII  Multi-channel surround 
output: DTS (Digital Theater 
Systems), Dolby Digital, and 
Dolby Pro Logic II.
   
STEREO 
Stereo sound from two front 
speakers.
   
 
 
 
EN
 
						

							37
[Mic] 
   
Turns on or off microphone output.
   
 
 
  • [On] 
 – Turns on microphone. 
   
 
 
  • [Of f ] 
 – Turns off microphone.
   
 
 
 
[Echo Level] 
   
Press  
 
  
 to set the echo level.
   
 
[Key] 
   
Press  
 
  
 to set the pitch level that matches 
your voice.
   
 
[Score] 
   
Selects a karaoke rating score level.
   
 
 
  • [Of f ] 
 – No score rating display. 
   
 
 
  • [Basic] 
 – Basic rating.
   
 
 
  • [Intermediate] 
 – Intermediate rating.
   
 
 
  • [Advance] 
 – Advance rating.
Turn off vocal (cancel voice)
1 Press  VOCAL 
 repeatedly until ‘ VOICE 
CANCEL’ is displayed.
Note
  You cannot cancel the voice output from MP3   •
or WMA audio.
Adjust microphone volume 
level
1  Connect a microphone (not supplied) to 
  MIC 
 jack on this Home Theater System. 
2  Turn on the microphone output. (see 
‘Karaoke settings’.)
3 Press  MIC 
 ( VOL +/- 
) to adjust the 
microphone volume.
   
 
 
‘MIC XX’ is displayed.   »
   
 
 
 
 
 
 
Sing or speak through the  • 
microphone to  nd the desired 
volume level.
Karaoke settings
1  Turn on the T V to the correct viewing 
channel for this Home Theater System.
2 Press  KARAOKE 
. 
   
 
 
    »[Karaoke Setup Page] 
 menu is 
displayed.
3  Select an option and change the setting, 
then press  OK 
.
   
 
 
To exit the menu, press   • KARAOKE 
.
   
 
 
 
 
 
12
Adjust sound
English
EN
 
						

							38
General setup
1 Press     
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
2 Press   
.
3  Select an option, then press  OK 
.
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
Note
 
See the explanations of the above options in   •
the following pages.
OSD Language
Sleep Timer Screen Saver Disc Lock EasyLink Setup
Display Dim
General Setup
DivX(R) VOD Code
8 Adjust settings
   
You can customize various kinds of settings as 
you prefer. Refer to the following instructions to 
navigate through the setup menus. 
Symbol  Options
 
 
[General Setup]
   
[Audio Setup]
   
[Video Setup]
   
[Preferences]
Note
  If the setup option is grayed out, it means the   •
set ting cannot be changed at the current state.
 
 
 
 
 
EN
 
						

							39
Note
  You must turn on the HDMI CEC operations   •
on the T V/devices before you can enjoy the 
EasyLink controls. See the T V/devices manual 
for details.
   
Philips does not guarantee 10 0% 
  •
interoperability with all HDMI CEC compliant 
devices.
   
 
 
 
[Disc Lock] 
   
Sets play restriction for a speci c discs. 
Before you star t, place the disc in the disc 
compar tment (maximum 40 discs can be 
locked).
   
 
 
  • [Lock] 
 – Restricts access to the current 
disc. Once activated, a password is 
needed to unlock and play the disc. 
   
 
 
  • [Unlock] 
 – Plays all discs.
Tip
 
You can set or change the password (see   •
‘Adjust set tings’ > ‘Preferences’ >  [Password] 
).
 
 
 
 
 
[Display Dim] 
   
Changes the brightness level of the display 
panel on this Home Theater System.
   
 
 
  • [10 0%]  
– Normal brightness.
   
 
 
  • [70%]  
– Medium brightness.
   
 
 
  • [4 0%] 
 – Dimmest display.
   
 
 
 
[OSD Language] 
   
Selects the default on-screen menu language.
   
 
 
 
[Screen Saver] 
   
Turns off or on the screen saver mode. Helps 
to protect the T V screen from being damaged 
due to over exposure to a static image for too 
long.
   
 
 
  • [On] 
 – Sets the screen saver to appear 
af ter 5 minutes of inactivity (for example, 
in pause or stop mode).
   
 
 
  • [Of f ] 
 – Disable screen saver mode.
   
 
 
 
 
 
 
 
 
[EasyLink Setup] 
   
If this Home Theater System is connected 
to HDMI CEC compliant T V/devices, all 
connected devices can respond to the 
following commands simultaneously:
Option  Description
 
 
[EasyLink] 
Turns off or on all EasyLink 
features.
   
To disable this feature, select 
  [Of f ] 
.
   
[One 
To u c h  
Play]  When you press  PLAY 
, the 
T V and Home Theater System 
are turned on. Disc play star ts 
if there is a disc in the Home 
Theater System. 
   
To disable this feature, select 
  [Of f ] 
.
   
[One 
To u c h  
Standby]  When you press and hold 
  STANDBY 
 for at least three 
seconds, the Home Theater 
System and all the HDMI CEC 
devices switch to standby 
simultaneously. 
   
To disable this feature, select 
  [Of f ] 
.
   
[System 
Audio 
Control]  When you play audio that is 
routed from the connected 
devices, this Home Theater 
System switches to the 
corresponding audio source 
automatically.
   
To enable this feature, select 
  [On] 
. Then proceed to  [Audio 
Input Mapping] 
 to scan and map 
all the connected devices.
   
[Audio 
Input 
Mapping]  When you map the audio 
input correctly, this Home 
Theater System switches to the 
audio from the played device 
automatically.
Adjust settings
English
EN
 
						

							40
Audio setup
1 Press     
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
2 Press   
 to select  [Audio Setup] 
, then 
press  
  .
3  Select an option, then press  OK 
.
4  Select a setting, then press  OK 
.
   
 
 
To return to the previous menu,  • 
press  
   
 BACK 
.
   
 
 
To exit the menu, press   • 
 
 
 SETUP 
.
Note
 
See the explanations of the above options in   •
the following pages.
 
 
 
 
 
[Speakers Volume] 
   
Sets the volume level of each speaker to get 
the ideal audio balance.
  1) To star t, press  OK 
.
   
2) Select a speaker in the menu, then press  
 
 to adjust the volume level.
   
3) Press  OK 
 to con rm and exit.
Note
 
The test tone is emit ted from the speaker   •
which you adjust.
 
 
 
 
 
CD Upsampling Speakers Delay Speakers Volume
HDMI Audio
Audio Setup
Audio Sync
[Sleep Timer] 
   
Switches to standby automatically af ter the 
preset time.
   
 
 
  • [15 mins] 
,  [30 mins] 
,  [45 mins] 
,  [60 mins] 
 
– Selects the count down time before 
the Home Theater System switches to 
standby.
   
 
 
  • [Of f ] 
 – Disables sleep timer mode.
   
 
 
 
[DivX(R) VOD Code] 
   
Displays the DivX® registration code.
Tip
 
Enter this Home Theater System DivX   •
registration code when you rent or purchase 
video from w w w.div x.com/vod. The DivX 
videos rented or purchased through the 
DivX® VOD ( Video On Demand) ser vice 
can be played only on the device to which it is 
registered.
   
 
 
 
 
EN