Philips Hts3578 User Manual

							11
Place the Home Theater 
System
   
 
 
Place the Home Theater System where  • 
it cannot be pushed, pulled over or 
knocked down. Do not place it in an 
enclosed cabinet.
   
 
 
Be sure that you have full access to the  • 
power cord for easy disconnection of the 
Home Theater System from the power 
supply.
   
 
 
 
  
 
 
 
 
 
 
1  Place this Home Theater System near the 
TV.
   
 
 
2  Place the speakers system at normal 
listening ear-level and directly parallel to 
the listening area.
   
 
 
3  Place the subwoofer at the corner of the 
room or at least 3 feet away from the T V.
  Tip
 
To avoid magnetic inter ference or unwanted   •
noise, never place this Home Theater System 
too close to any radiation devices.
   
 
 
 
 
SUBWOOFER
FRONT
RIGHT
FRONT
LEFT
CENTER
REAR
RIGH
T
REAR
LEFT
   
 
 
 
 
 
 
 
 
 
3 Connect
 
 
Make the following connections to use your 
Home Theater  System.
   
  
 
 
 
Basic connections: 
   
 
 
Video • 
   
 
 
Speakers and subwoofer • 
   
 
 
Power • 
   
 
 
 
 
Optional connections: 
   
 
 
Radio antenna • 
   
 
 
Audio • 
   
 
 
Audio from TV • 
   
 
 
Audio from cable box/recorder/ • 
game console
   
 
 
 
 
Other devices • 
   
 
 
Por table media player • 
   
 
 
USB device • 
 
Note
 
Refer to the type plate at the back or bot tom   •
of the product for identi cation and supply 
ratings.
   
Before you make or change any connections, 
  •
ensure that all the devices are disconnected 
from the power outlet.
  Tip
Different types of connectors may be used to   •
connect this product to your T V, depending on 
availability and your needs. A comprehensive 
interactive guide to help you connect your 
product is available at www.connectivityguide.
philips.com.
Connect
English
EN
 
						

							12
Option 1: Connect to the HDMI jack
1  Connect an HDMI cable (not supplied) 
to the  HDMI OUT 
 jack on this Home 
Theater System and the HDMI input jack 
on the T V.
Note
  If your device suppor ts HDMI CEC , you can   •
control compliant devices with a single remote 
control. (see ‘Get star ted’ > ‘Use Philips 
EasyLink’).
Tip
  If the T V has a DVI connection only, connect   •
via a HDMI/DVI adaptor. Connect an audio 
cable for sound output.
   
You can optimize the video output. (see 
  •
‘Adjust set tings’ > ‘ Video setup’ >  [HDMI 
Setup] 
).
   
This type of connection provides the best 
  •
picture quality.
HDMI OUTHDMI IN
Connect video cables
 
 
Connect this Home Theater System to TV to 
view disc play. Select the best video connection 
that the TV can suppor t.
   
 
 
 
Option 1: Connect to the HDMI jack (for  • 
a HDMI, DVI or HDCP-compliant T V ). 
   
 
 
Option 2: Connect to the component  • 
video jacks (for a standard T V or 
Progressive Scan T V ).
   
 
 
Option 3: Connect to the video (CVBS)  • 
jack (for a standard T V ).
Note
  You must connect this Home Theater System   •
directly to a T V.
 
 
 
 
 
EN
 
						

							13
Option 3: Connect to the Video 
(CVBS) jack
1  Connect a composite video cable to 
the  VIDEO 
 jack on this Home Theater 
System and the VIDEO input jack on the 
TV.
Note
  The video input jack on the T V might be   •
labeled as A / V IN, VIDEO IN, COMPOSITE or 
BASEBAND. 
   
This type of connection provides standard 
  •
picture quality.
 
 
 
 
 
 
VIDEO
VIDEO OUT
VIDEO IN
Option 2: Connect to the component 
video jack
1  Connect the component video cable 
(not supplied) to the  Y Pb Pr 
 jacks on 
this Home Theater System and the 
COMPONENT VIDEO input jacks on the 
TV.
   
 
 
If a progressive scan T V is used, you  • 
may turn on the progressive scan 
mode. (see ‘Get star ted’ > ‘Turn on 
Progressive Scan’).
Note
  The component video input jack on the T V   •
might be labeled as Y Pb/Cb Pr/Cr or YUV. 
   
This type of connection provides good picture 
  •
quality.
VIDEO OUT
PbPrY
PbPrY
Connect
English
EN
 
						

							14
   
 
 
 
 
 
 
Connect speakers and 
subwoofer
   
 
 
 
 
 
 
 
 
1  Connect the speakers and subwoofer to 
the matching jacks on the Home Theater 
System.
  Note
 
Ensure that the colors of the plugs and jacks   •
are matched.
Connect speaker cables to 
speakers
   
 
  
 
 
 
 
1  Connect the speaker cables to the 
matching color jacks on the speakers (or 
speaker stands).
   
 
 
 
 
 
 
Connect speaker to speaker 
stand
    
 
 
1  Attach the speakers to the speaker 
stands and secure the position with screws.
EN
 
						

							15
Connect audio cables/other 
devices
   
Route the audio from other devices to this 
Home Theater System to enjoy audio play with 
multi-channel surround capabilities.
Connect audio from TV
   
(also used for EasyLink control)
1  Connect the audio cables (not supplied) 
to the  AUDIO IN-AUX1 
 jacks on the 
Home Theater System and the AUDIO 
output jacks on the T V. 
Note
  To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘AUX1’ is displayed on the 
display panel.
   
 
 
 
AUDIO OUT
AUX 1
AUDIO IN
Connect radio antenna
1  Connect the FM antenna to the  FM75 
  
 
jack on this Home Theater System 
(for some models, this cable is already 
connected).
2  Ex tend the FM antenna and  x its ends to 
the wall.
Tip
  For bet ter FM stereo reception, connect to an   •
ex ternal FM antenna.
 
 
 
 
 
 
FM (75 Ω)  ANTENNAConnect
English
EN
 
						

							16
Connect to coaxial jack  
1  Connect a coaxial cable (not supplied) 
to the  COA XIAL DIGITAL-IN 
 jack 
on the Home Theater System and the 
COA XIAL /DIGITAL output jack on the 
device.
Note
  To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘COA X IN’ is displayed on the 
display panel.
   
 
Connect audio from cable box/
recorder/game console
   
You can choose to connect to analog or digital 
jack depending on the device capabilities.
   
 
Connect to analog jacks 
1  Connect the audio cables (not supplied) 
to the  AUDIO IN-AUX2 
 jacks on the 
Home Theater System and the AUDIO 
output jacks on the device. 
Note
  To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘AUX2’ is displayed on the 
display panel.
   
 
AUX 2
AUDIO OUT
AUDIO IN
EN
 
						

							17
Connect portable media player
1  Connect a 3. 5mm stereo audio cable (not 
supplied) to the  MP3 LINK 
 jack on this 
Home Theater System and the phone 
jack on the por table media player (such as 
MP3 player).
Note
  To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘MP3 LINK’ is displayed on the 
display panel. 
Connect USB device
1  Connect the USB device to     
 
 
 USB 
 jack 
on this Home Theater System.
Note
  This Home Theater System can only play/view   •
MP3, WMA, DivX (Ultra) or JPEG  les that are 
stored on such devices.
   
Press  
  •USB 
 to access the content and play the 
 les.
MP3
Connect to optical jack 
1  Connect an optical cable (not supplied) 
to the  OPTICAL DIGITAL-IN 
 jack 
on the Home Theater System and the 
OPTICAL /SPDIF output jack on the 
device.
Note
  To listen to the audio output from this   •
connection, press  AUDIO SOURCE 
 
repeatedly until ‘OPTI IN’ is displayed on the 
display panel.
   
 
 
 
DIGITAL INOPTICAL
DIGITAL OUTOPTICAL
Connect
English
EN
 
						

							18
Connect power cord
Warning
  Risk of product damage! Ensure that the   •
power supply voltage corresponds to the 
voltage printed on the back or the underside 
of the Home Theater System.
1  Connect the power cord to the power 
outlet when all the required connections 
are done.
   
 
 
The Home Theater System is ready to    »
be set up for use.
EN
 
						

							19
Control a play source
   
 
 
1 Press   
 
RADIO 
,  USB 
 or  DISC 
 button to 
select the source you wish to control.
   
 
 
2  Select the desired function (for example  
 
,   
). 
 
 
 
 
 
 
 
Navigate through the menu
 
 
  
 
 
 
 
1  Point the remote control directly at the 
remote sensor on the Home Theater 
System and select the desired function.
   
 
 
2  Press the following buttons on the 
remote control to navigate through the 
on-screen menus.
  Button  Action
 
  
  
Move up or down
   
 
Move left or right
   
OK 
Con rm a selection
 
 
 
Enter numbers
 
 
 
 
 
 
 
 
 
 
 
4 Get started
 
 
 
 
Insert the remote control 
batteries
   
 
 
 
 
 
 
 
1  Slide the batter y cover off the back of the 
remote control.
   
 
 
2  Inser t the 2 supplied batteries (A A A). Be 
sure the + and - ends of the batteries line 
up with the markings inside the case.
   
 
 
3  Slide the cover back into position.
 
Note
 
Do not mix bat teries (old and new or carbon   •
and alkaline, etc.).
   
Remove bat teries if they are exhausted or if 
  •
the remote control is not to be used for a long 
time.
   
Batteries contain chemical substances, they 
  •
should be disposed off properly.
 
 
 
 
 
Get started
English
EN
 
						

							20
Select menu display language
Note
  Skip this set ting if this Home Theater System   •
is connected to a HDMI CEC compliant T V. It 
switches automatically to the same OSD menu 
language as per your T V set ting.
1 Press  DISC 
.
2 Press   
 
 SETUP 
.
   
 
 
    »[General Setup] 
 menu is displayed.
3 Press   
.
4 Press   
  
 to select  [OSD Language] 
 in 
the menu, then press  
  .
   
 
 
The language options are different  • 
depending on your countr y or 
region. It may not correspond to the 
illustration shown here. 
5 Press      
 to select a language, then press 
  OK 
.
Tip
 
You can set the default language for DVD disc   •
menu (see ‘Adjust set tings’ > ‘Preferences’ > 
  [Disc Menu] 
).
General Setup
Screen Saver Disc Lock EasyLink Setup
Display Dim
DivX(R) VOD Code Sleep Timer
Ó×i