Philips Bdl4251v User Manual

							User Manual BDL4251V 
 
30 
 
Main-Menu 
 
SCREEN 
 H POSITION   Controls Horizontal Image position within the display area of the LCD.   Press + button to move screen to right. Press - button to move screen to left. 
   
   
    
 
V POSITION  Controls Vertical Image position within the display area of the LCD.   Press + button to move screen to UP. Press - button to move screen to DOWN. 
  
  
    
CLOCK * : INPUT VGA only 
 
Press + button to expand the width of the image on the screen the right.   Press - button to narrow the width of the image on the screen the left. 
   
 
         
CLOCK 
PHASE * : INPUT VGA only 
 
Improves focus, clarity and image stability by increasing or decreasing this setting. 
    
 
     
    
ZOOM MODE  You can select “FULL”, “NORMAL” and “CUSTOM” and “REAL”. (INPUT HDMI,DVI-D,VGA only)     You can also select “FULL”,“NORMAL” “DYNAMIC” and “CUSTOM” and “REAL”. (INPUT COMPONENT, S-VIDEO, VIDEO only) 
Selecting “DYNAMIC” will make the screen display panoramic with the expansion of the middle and outside of the screen changed. (The upper and the bottom of the image will be cut by expansion.) Dynamic image is the same as FULL size image when HDTV signal is input.   Selecting “REAL” image will be displayed 1 by 1 pixel. 
             
 
7ownlo>dedA“romA]cÅ>nu>ltcomAÅ>nu>ls      
						

							                                          User Manual BDL4251V 
 
 
31 
 
CUSTOM ZOOM  “CUSTOM ZOOM” will be selected when you select “CUSTOM” on the screen “ZOOM” mode.   ZOOM: expands the horizontal and the vertical size simultaneously. 
HZOOM: expands the horizontal size only.   VZOOM: expands the vertical size only. 
H POSITION: moves to the right with + button. moves to the left with – button. V POSITION: moves up with + button. moves down with – button.  
     
 
SCREEN RESET  Selecting Screen reset allows you to reset all OSD settings from PICTURE setting.   Select “Yes” and press “SET” button to restore the factory preset data. Press “EXIT” button to cancel and then return to the previous menu.        
   
						

							User Manual BDL4251V 
 
32 
 
Main-Menu   
AUDIO 
 BALANCE  Adjusts the balance of L/R volume. Press + button to move the stereo sound image to right.   
Sound of the left side will be small. Press - button to move the stereo sound image to left. 
     
   
 
 
TREBLE  This feature helps you to accentuate or reduce the high frequency sound.   Press + button to increase TREBLE sound. Press - button to decrease TREBLE sound. 
    
   
   
BASS  This feature helps you to accentuate or reduce the low frequency sound.   Press + button to increase BASS sound. Press - button to decrease BASS sound. 
    
 
        
SPEAKER  This feature helps you to cut the internal or the external loudspeaker. 
Press + or - button to exchanges the internal and the external l oudspeaker. 
   
   
            
AUDIO RESET  Selecting Audio reset allows you to reset all OSD settings from AUDIO setting.   Select “YES” and press “SET” button to restore the factory preset. Press “EXIT” button to cancel and then return to the previous menu.              
7ownlo>dedA“romA]cÅ>nu>ltcomAÅ>nu>ls      
						

							                                          User Manual BDL4251V 
 
 
33 
Main-Menu   
PIP (PICTURE IN PICTURE) 
 Note: The “PIP” and “POP” modes do not function when the screen size is “CUSTOM” or “REAL”. 
 PIP SIZE   Selecting the size of picture inserted at the “Picture-in-Picture” (PIP) mode. “Large”, “Middle” and “Small” are available. 
             
PIP AUDIO   Selecting the sound source in PIP mode. When selecting “MAIN AUDIO”, you will get the sound for the main picture and when selecting   
“PIP AUDIO”, you will get the sound for the picture instead. 
            
PIP RESET  Selecting PIP Reset allows you to reset all OSD settings from PIP setting.   Select “Yes” and press “SET” button to restore the factory preset data.   Press “EXIT” button to cancel and then return to the previous menu. 
 
      
    
						

							User Manual BDL4251V 
 
34 
  
Main-Menu
   
CONFIGURATION 1 
 AUTO ADJUST * : INPUT VGA only 
 
Press SET button to automatically adjust screen size, horizontal position, vertical position, clock,   clock phase, white level and black level. Press  EXIT  button to cancel execution AUTO ADJUST and then will return to the previous menu. 
           
POWER SAVE  Selecting RGB ON, the monitor will go to power management mode when HDMI, DVI-D,VGA, sync is lost. 
Selecting VIDEO ON, the monitor will go to power management mode after about 10 minutes delay from when COMPONENT and VIDEO input signal is lost. 
        
LANGUAGE  OSD control menus are available in eight languages. (English, German, French, Italian, Spanish, Polish, Turkish, Russian, Simple Chinese) 
           
PANEL SAVING  Select PANEL SAVING functions to reduce the risk of the image persistence.   COOLING FAN: The cooling fan will be auto-turned on  and off according to temperature of monitor 
when selected “AUTO”. The cooling fan will be turne d on always when selected “ON”. BRIGHTNESS: The brightness is decreased when selected ON. PIXEL SHIFT: Image is slightly expanded and moves 4 directions (UP, DOWN, RIGHT, LEFT) periodically (Need setting the time for movement). Movement area is approximately +/- 10mm from original position; Please locate the important information such as text within 90% area of screen image.   
See note (1) for this functions. PIP and STILL will be disabled when MOTION is active. 
   
COLOR SYSTEM * : INPUT S-VIDEO, AV only 
 
Selecting the Color System depends on your input video format. AUTO: NTSC, PAL, SECAM, PAL60 or 4.43 NTSC is automatically selected.   
NTSC: Specific selection of NTSC. PAL: Specific selection of PAL. SECAM: Specific selection of SECAM.   
PAL-60: Specific selection of PAL60. 4.43NTSC: Specific selection of 4.43 NTSC. 
             
 
7ownlo>dedA“romA]cÅ>nu>ltcomAÅ>nu>ls      
						

							                                          User Manual BDL4251V 
 
 
35 
CONFIGURATION RESET  Selecting the CONFIGURATION RESET allows you to reset all configuration settings.   Select Yes and press SET button to restore the factory preset data. Press  EXIT  button to cancel and return the previous menu. 
           
FACTORY RESET  Selecting YES allows you to reset PICTURE, SCREEN, AUDIO, CONFIGURATION1,2 and   ADVANCED OPTION will be back to factory settings (except LANGUAGE, DATE AND TIME and SCHEDULE). Select YES and press SET button to restore the factory preset data.   Press  EXIT  button to cancel and return the previous menu. 
7ownlo>dedA“romA]cÅ>nu>ltcomAÅ>nu>ls   
						

							User Manual BDL4251V 
 
36 
 
Main-Menu
   
CONFIGURATION 2 
 OSD 
TURN OFF  The OSD control menu will stay on as long as it is used.   In the OSD Turn Off submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSD control menu. The preset choices are 5 -120 seconds. 
           
INFORMATION OSD   Selects the information OSD to be displayed or not. The information OSD will be displayed when the input signal is changed or a source change or warning message like no-signal or out-of range. A time between 1 to 10 seconds is available. 
          
SLEEP TIMER  To select SLEEP TIMER mode ON/OFF. In the SLEEP TIMER menu, you can preset the monitor to automatically power down. A time between 1 to 24 hours is available. When the SLEEP TIMER is set, the SCHEDULE settings will be disabled. 
        
OSD H POSITION   Adjusts the horizontal position of the OSD menu. 
               
OSD V POSITION   Adjusts the vertical position of the OSD menu. 
                      
 
7ownlo>dedA“romA]cÅ>nu>ltcomAÅ>nu>ls      
						

							                                          User Manual BDL4251V 
 
 
37 
MONITOR INFORMATION  Indicates the model and serial number of your monitor.    
             
  
						

							User Manual BDL4251V 
 
38 
 
Main-Menu   
ADVANCED OPTION 
 
INPUT RESOLUTION * : INPUT VGA only  This feature makes the display controlling the sour ce in order to match display capabilities by choice or 
automatically. You can select one of the following  timings: 
(1)1024x768, 1280x768, 1360x768 and 1366x768.    
(2) 640x480, 720x480 and 852x480    
(3) 800x600, 1064x600 and 720x576    
(4) 1400x1050 and 1864x1050   
(5) 720x400 and 640x400   
AUTO: Determines the resolution automatically. 
The setting you select becomes effective when POWER is turned OFF and ON again. 
 
 
BLACK LEVEL EXPANSION     * : INPUT HDMI, DVI-D(MODE-HD), S-VIDEO, VIDEO only 
 
Selects a level of black expansion from “OFF”,”LOW ”, “MIDDLE” and “HIGH”. 
In case of go under the black cut-off level, please adjust the “Black level” in moderation on OSD menu. 
             
GAMMA SELECTION  
Selects a display gamma. It refers to the brightness performance curve of signal input. 
2.2  
2.4 
S gamma Native NOTE: sRGB picture mode is standard and cannot be changed. 
   
 
 
SCAN MODE * : INPUT HDMI, DVI-D(MODE-HD), S-VIDEO, VIDEO only 
 
Changes the display area of the image.   
OVERSCAN: Set to display area about 95%   
UNDERSCAN: Set to display area about 100% 
           
SCAN CONVERSION     * : INPUT HDMI, DVI-D(MODE-HD), S-VIDEO, VIDEO only 
 
Selects IP (Interlace to Progressive) converter function. PROGRESSIVE: Enable the IP function, to convert interlace signal to progressive. Normally use   
this setting.   
INTERLACE*: Disable the IP function. *NOTE: This mode is better suited for motion pictures, but it increases chance of image retention. 
                  
7ownlo>dedA“romA]cÅ>nu>ltcomAÅ>nu>ls      
						

							                                          User Manual BDL4251V 
 
 
39 
 
FILM MODE * : INPUT HDMI, DVI-D(MODE-HD), S-VIDEO, VIDEO only   
Selects 
Film mode function. 
AUTO: Enable the Film mode function. This mode is better suited for movies, which is converted 24 
Frames/sec sour
ce to DVD Video. We recommend to select “PROGRESSIVE” in “SCAN CONVERSION”. 
OFF: Disable the Film mode function. This mode is better suited for Broadcasting or VCR source. 
        
IR CONTROL 
 
 Selects the operation mode of the remote controller when multiple BDL4251V monitors are connected via 
RS232C.   
The item in this menu will become effective by pressing “SET” button on the selected item. NORMAL: The monitor will be controlled normally by remote controller. PRIMARY: The first BDL4251V monitor of those multi-connected via RS232C is designated as PRIMARY. SECONDARY: BDL4251V monitors other than the first one multi-connected via RS232C are designated as SECONDARY.   
LOCK: Disable the monitor control by infrared remote controller. 
Keep pressing “DISPLAY” button during 5 sec or more, this setting will return to “NORMAL”. 
   
KEYBOARD CONTROL  Selects the operation mode of the keyboard control. 
Select “LOCK” to disable the keyboard. Select “UNLOCK” to enable the keyboard. 
          
        TILING 
     
  TILING demonstrates multiple screens. This feature provides a single large screen using up to 25 monitors.       It will be able to divide up to 5 each H and V.       This requires you to feed the PC output into each of the monitors through a distributor.   
     H MONITORS: Select number of horizontal monitors.       V MONITORS: Select number of vertical monitors.        POSITION: Select a position to expand the screen.   FRAME COMP: Works in tandem with TILING to compensate for the width of the tile bezels in order to accurately display the image.       ENABLE: Select “YES”, the monitor will expand the selected position.        PIP and STILL will be disabled when “TILING” is activated. 
 
       HEAT STATUS * : D i s c l a m e r :   H e a t   s e n s o r   i s   i n d i c a t i v e .         HEAT STATUS allows you to watch the thermal status at any time  via the OSD menu and/or via RS232C 
commands . The indicated temperature has a accuracy of 3 deg rees (plus and minus)..   
      Press 
“SET” button to enter the submenu to monitor the heat status.   
     Press “EXIT” button to cancel and then return the previous menu. 
       
   
      DATE AND TIME        Adjusts the current date and time for internal clock. 
      You should set this function when you use “SCHEDULE”. 
         
7ownlo>dedA“romA]cÅ>nu>ltcomAÅ>nu>ls