Philips Bdl4251v User Manual

							User Manual BDL4251V 
 
20 
 
Connecting to a Personal Computer 
 As you finish the connection between the computer and the LCD monitor, you could play the contents in the computer 
and display them on the LCD 
monitor. 
Connecting the LCD Monitor to a Personal Computer 
   To achieve this, apply the supplied VGA signal cable (mini D-sub 15 pin to mini D-sub 15 pin) to make connection between a PC and the LCD 
monitor   
(VGA
 IN connector). 
   When connecting more than one LCD monitors to a PC, apply another VGA signal cable (mini D-sub 15 pin to mini D-sub 15 pin; it’s 
commercially   
available) to make connection between the LCD monit or(VGA OUT
 connector) and the other (VGA IN connector). 
   The AUDIO IN 1, 2, 3 or HDMI can be connected for audio input. After choosing one of the AUDIO IN connectors, you migh t need to select 
AUDIO 1, 2, 3 or HDMI using the AUDIO SOURCE button on the remote control. 
    When connecting more than one LCD monitors to a PC, apply RCA cable to make connection between the LCD monitor(AUDIO OUT connector) and   
the other (
AUDIO IN 1, 2, 3). HDMI source is not suitable for this case.     
      
  
						

							                                          User Manual BDL4251V 
 
 
21 
   
Connecting to a Digital Interface Equipment 
 Connections can be made between the LCD monitor and other digital equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard.   
Connect the LCD Monitor to a Computer with a Digital Output  
   The HDMI , DVI-D IN connector accepts a HDMI cable. 
   HDMI and DVI-D can receive HDMI video signals from  either a HDMI output of for instance a DVD player or from a DVI-D output of a PC. 
   To ensure the display quality, use a cable with a quality prescribed by DVI standards.   
   The AUDIO IN 1, 2, 3 or HDMI connector can be chosen to receive an audio source. Select AUDIO 1, 2, 3 or HDMI from the AUDIO 
SOURCE
 button on the remote control. HDMI(for audio) is only selectable only when HDMI or DVI-D (for video) is selected. 
    Note that the signal of a HDMI / DVI-D connector cannot be output to the VGA OUT connector. 
 
                                                                                                                                                                                   
                                                         
                                                   
7ownlo>dedA“romA]cÅ>nu>ltcomAÅ>nu>ls  
						

							User Manual BDL4251V 
 
22 
 
Connecting to a DVD Player 
 As you finish the connection between the DVD player and the LCD monitor, you could display the contents from the played  DVD on the LCD 
monitor. You might like to refer to your DVD player’s manual for further information. 
 
Connect the LCD Monitor to a DVD Player 
   To achieve this, apply a 3x components cable (Y, Pb, Pr) with BNC connectors at one end and RCA connec tors at the other end between DVD 
player and display. In case you can only obtain RCA  connectors on both ends you can use the in box ava ilable BNC-to-RCA converters.   
DVD player(Y, Pb, Pr Out) and LCD monitor (COMPONEN T).
 You might need BNC-to-RCA adapters(including in the accessories) to convert 
the BNC connectors to RCA connectors if you are using th e 
separated signaling(Y, Pb, Pr) RCA cable. 
    If your DVD player supports HDMI signaling, apply a HDMI  to HDMI cable for the connection. 
    The AUDIO IN 2 , 3 (both of RCA connector type) can be used for audio input.   Select [AUDIO 1] ( for 3.5φ p hone jack), [AUDIO 2], [AUDIO 3]   
Or [HDMI] from the AUDIO SOURCE button on the remote control.    HDMI (for audio) is selectable only when HDMI or DVI-D (for video) is 
 
selected. 
    
   
DownloadedaFromaTVDManual3comaManuals  
						

							                                          User Manual BDL4251V 
 
 
23 
 
Connecting to a Stereo Amplifier 
 You can connect your stereo amplifier to your LCD monitor. Refer to your amplifiers manual for further information.   
Connect the LCD Monitor to a Stereo Amplifier 
     Turn on the LCD monitor and the amplifier only after all connections have been finished. 
     Apply 2 RCA cables (audio left and right) to make connection between the amplifier (audio in) and the  LCD monitor (audio out). 
      Do not reverse the audio left and right jacks. 
      For the preferred audio signal, select [AUIDO1], [AUDIO2], [AUDIO3] or [HDMI] from the AUDIO SOURCE button on the remote control.   
  HDMI(for audio) is selectable only when 
HDMI or DVI-D (for video) is selected. 
     The AUDIO OUT RCA connectors output sound from the selected AUDIO SOURCE. 
                   
 
Connecting to a display mounted PC 
This monitor has an area in the backcover to mount  a small form fact PC or set-top box. You can connect your mounted PC to your LCD monitor. Use M4 mounting screws for 100x234 mm to fix your mount PC.    
                                                               
                                                                                              
 
DownloadedaFromaTVDManual3comaManuals   
						

							User Manual BDL4251V 
 
24 
 
Basic Operation 
 
Power ON and OFF Modes 
 The LCD monitor power indicator will turn green while powered on and will turn red while powered off. The monitor can be powered on or 
off using the following three options: 
 
 
1.  Pr
essing the Main Power Switch.  NOTE: 
When the Main Power Switch is used to power off the 
LCD monitor, the remote control, the power button and the indicator 
will not work. Make sure to turn the Main Power Switch on before 
using 
the other two options. 
 
 
   
 
2. Pressing the power button.   NOTE: 
Before pressing the power button, be sure to turn on the 
Main Power 
button on the LCD monitor.        
 
  
  
   
3. Using the remote control.  NOTE: 
Before operating the remote control, be sure to turn on the Main 
Power 
Switch on the LCD monitor. 
                        
7ownlo>dedA“romA]cÅ>nu>ltcomAÅ>nu>ls    
						

							                                          User Manual BDL4251V 
 
 
25 
 
Power Indicator 
 
 Status 
Power ON  Green 
Power Standby  Red 
Power OFF  LED Off 
Diagnosis    
(Detecting failure)  Red Blinking 
* See troubleshooting 
  
Using Power Management 
 
Please turn off the LCD monitor when it will not be  used for long time. This could potentially increase the life and decrease the power consumption of 
the LCD monitor.  
Standby mode:  Push the power button on the remote control or on  the monitor to enter the standby mode. 
Power Off : Push the Main Power Switch to enter the power off  mode. 
 
Display Signal of Video Source Setting to [VIDEO] 
Use the input button on the front panel or the VIDEO  SOURCE button on the remote control to set video sour ce to [VIDEO]. 
Use the COLOR SYSTEM OSD menu to select [AUTO], [NTS C], [PAL], [SECAM], [PAL60], [4.43NTSC], according to your video format. 
 
Picture Size 
HDMI, DVI-D, VGA  FULL  NORMAL  CUSTOM 
  REAL 
COMPONENT,      VIDEO    FULL  NORMAL  DYNAMIC 
  REAL  CUSTOM 
  Signal Type
 NORMAL SIZE Recommended Size 
NORMAL 
 4:3 
 DYNAMIC 
 
Squeeze 
 
FULL 
   
NORMAL: Display with the input signal aspect ratio from PC signal, or  display in 4:3 aspect ratio at COMPONENT or VIDEO signal. 
FULL:  Display in the entire screen. 
DYNAMIC:    Expand 4:3 pictures to the entire screen with non-linearit y. (Some round image might be cut by expansion.)   
CUSTOM  (ZOOM):  Images  can  be  expanded  beyond  the  active  display  area .  The  image  which  is  outside  of  the  active  display  area  w ould  not  be 
shown.  
REAL:  Image will be displayed for one by one pixel. 
  ZOOM 
 
  ZOOM 
7ownlo>dedA“romA]cÅ>nu>ltcomAÅ>nu>ls     
						

							User Manual BDL4251V 
 
26 
  
Smart Picture Mode 
HDMI , VGA  HIGHBRIGTH  STANDARD  sRGB 
 
COMPONENT, VIDEO    HIGHBRIGTH  STANDARD  CINEMA 
 
 
Audio Source Switching 
 You can select the audio source using the AUDIO SOURCE  button on the remote control. 
 
HDMI    HDMI  AUDIO1  AUDIO2  AUDIO3 
 
  
Control Lock Mode 
This function disables the operation o buttons so that th e adjustments you make are not active when they are pressed. 
To disable the buttons, press and hold down the   and   buttons together for at least 3 seconds. 
To enable the buttons, press and hold down the   and   buttons together for at least 3 seconds again. 
 
OSD Information   
 
HDMI , VGA   VGA 
1024 x 768 48kHz   60Hz AUDIO : 1 SIZE : FULL 
      Video Source 
           Input signal Information 
 
    Audio Source 
     Picture Size       
COMPONENT  COMPONENT AUDIO : 3 SIZE : FULL 
       Video Source 
     Audio Source 
     Picture Size  
 
S-VIDEO, VIDEO  S-VIDEO NTSC   AUDIO :3 SIZE : NORMAL 
      Video Source 
     Color System of Input Signal  Audio Source Picture Size   
PIP or POP  
Main:VGA 
Sub:S-VIDEO  VGA  
1024 x 768 48kHz   60Hz AUDIO : 1 S-VIDEO NTSC SIZE : FULL 
         
    Main picture Information 
 
      Sub picture Information       Main picture Information 
 
 
						

							                                          User Manual BDL4251V 
 
 
27 
 
  
  
 
  
OSD (On-Scr
een-Display) Controls 
         
 
Remote Control                   
 
Control Panel 
Press MENU button to open Main menu.   Press 
UP or DOWN button to select sub-menu. 
 
        
Press EXIT button to open Main menu. Press UP or DOWN button to select. 
Press SET button to enable setting.     
         
Press INPUT button to enable the setting. 
Press UP or DOWN, and PLUS or MINUS button to select function, or adjust  the  setting. Press SET button to enable the setting. 
 
         
Press UP or DOWN, and PLUS or MINUS button to select function, or adjust the setting. Press INPUT button to enable 
the setting. 
Press MENU or EXIT button to exit.    
         
Press EXIT button to exit. 
          
    
                                                      UP or DOWN button   INPUT button   “+” “-” button EXIT button     
OSD screen    
    
        
                       
           
						

							User Manual BDL4251V 
 
28 
 
Main-Menu    
PICTURE 
BRIGHTNESS  Adjusts the overall image and background screen brightness.   Press + button to increase brightness. Press - button to decrease brightness. 
      
     
CONTRAST  Adjusts the image brightness for the input signal.   Press + button to increase contrast.   Press - button to decrease contrast. 
       
 
   
SHARPNESS  This function is digitally capable to keep crisp images at any timing. It is adjustable to get a distinct image or a soft one as you prefer and set independently for each   
picture mode.   
Press + button to increase sharpness. Press - button to decrease sharpness. 
    
   
BLACK LEVEL  Adjusts the image brightness for the background.   Press + button to increase black level. Press - button to decrease black level. NOTE: sRGB picture mode is standard and cannot be changed.          
 
NOISE REDUCTION  
 
Adjusts the noise reduction level. Press + button to increase reduction level.   
Press
 - button to decrease reduction level. 
        
 
TINT * : INPUT HDMI , (HDMI INPUT MODE-HD), COMPONENT, S-VIDEO, VIDEO only 
 
Adjusts the tint of the screen. Press + button the flesh tone color becomes greenish.   
Press
 - button the flesh tone color becomes purplish. 
          
7ownlo>dedA“romA]cÅ>nu>ltcomAÅ>nu>ls       
						

							                                          User Manual BDL4251V 
 
 
29 
 
COLOR * : INPUT HDMI , DVI-D(INPUT MODE-HD), COMPONENT, S-VIDEO, VIDEO only 
 
Adjusts the color of the screen. Press + button to increase color depth.   
Press - button to decrease color depth. 
     
 
     
COLOR TEMPERATURE  
 Is used to adjust the color temperature. The image becomes reddish as the color temperature decreases, and becomes bluish as the color temperature increases. 
             
COLOR CONTROL  The color levels of red, green, and blue are adjusted by the color bars.   
R: Red, G: Green, B: Blue 
           
   
LIGHT SENSOR
   Select “ON” to enable the ambient light sensor. The  image brightness will be auto adjusted when 
ambient light changed. 
             
SMART CONTRAST  Select “ON” to enable the smart contrast. Can enhan cement the image of high contrast ratio.    
             
PICTURE 
RESET  Selecting Picture reset allows you to reset all OSD settings about PICTURE setting.   Select “Yes” and press “SET” button to restore to factory preset data. Press “EXIT” button to cancel and then return to the previous menu. 
7ownlo>dedA“romA]cÅ>nu>ltcomAÅ>nu>ls