Philips Bdl4251v User Manual

							User Manual BDL4251V 
 
10 
  
Terminal Panel 
 
 
 EXTERNAL CONTROL (mini D-Sub 9 pin)  
This is for serial connection when multiple BDL4251V monitors  are connected.  To achieve remote  management through RS232C commands (refer  to 
the  RS232C  remote  control  user  manual),  connect  the  RS 232C  OUT  connector  from  a  computer  or  from  a  different  BDL4251V  monitor  to  the 
RS232C  IN  connector  from  your  BDL4251V  monitor.  The  sa me  RS232C  commands  can  be  looped  through  by  connecting  the  RS232C  OUT  of  this 
monitor to the next RS232C IN. 
 VIDEO IN/OUT 
VIDEO IN connector (BNC and RCA):  To input a composite video signal.    Note that BNC and R CA are not available at the same time.   
VIDEO OUT connector (BNC):  To output the composite video signal from VIDEO IN conn ector.   
S-VIDEO IN connector (MINI DIN 4 pin):  To input the S-video (Y/C separate signal).   
 COMPONENT IN [Y, Pb, Pr] (BNC)   
To connect an equipment such as a DVD player, HDTV de vice, or Laser disc player. 
  AC OUT connector 
Bypass AC power output from AC IN connector. ( Rating : 100~240Vac, 50-60Hz, 3A Max.)   
 AC IN connector 
To connect with the supplied power cord.   
 EXTERNAL SPEAKER TERMINAL 
To output the audio signal to external speakers from AUDI O IN 1, 2, 3 jack or HDMI.   
 AUDIO OUT 
To output the audio signal from the AUDIO IN 1,2 and 3  jack or HDMI. 
 AUDIO IN 1, 2, 3 
To input audio signal from external equipment such as a co mputer, VCR or DVD player. 
 HDMI IN 
To input digital video/audio signals from a digital equipment  or computer.   
 DVI-D IN  
To input digital video signals from a digital equipment or co mputer. 
  VGA IN (mini D-Sub 15 pin)  
To input analog RGB signals from a computer or other RGB e quipment.   
  VGA OUT (mini D-Sub 15 pin) 
To output the signal from VGA IN. 
 
  
						

							                                          User Manual BDL4251V 
 
 
11 
 
Remote Control 
                                                     
  POWER button   
To turn the power on/off.    
If  LED  Power  Indicator  on  the  monitor  is  not  lightening,  t hen  the 
remote control will not work.    
  SMART PICTURE button 
To select smart picture mode from [HIGHBRIGHT], [STANDAR D],   
[sRGB], [CINEMA]
.     
HIGHBRIGHT: for moving image such as Video 
STANDARD: for images (Factory setting) 
sRGB: for text based images 
CINEMA: 
for movies. 
  PIP (Picture In Picture) butto n 
ON/OFF button: To turn PIP mode ON/OFF.   
INPUT button:  To select the input signal for the sub-picture. 
CHANGE  button:  To  exchange  between  the  main  picture  and  sub-
picture.  
Note:   
The  “PIP”  and  “POP”  modes  do  not  work  if  the  screen  s ize  is 
“CUSTOM” , “DYNAMIC” or “REAL”. 
 CONTRAST button   
To start  CONTRACT  OSD selection, and then push 
+ or - button 
to adjust the value.   
  DISPLAY button   
To  turn  on/off  the  setting  information  displayed  on  the  righ t-up  corner 
of the screen.   
 MINUS button 
To decrease the adjustment with OSD menu.   
To move the sub-picture left when in “PIP” mode. 
 SET button 
To activate the setting with OSD menu.   
 AUTO ADJUST button  
To execute the AUTO ADJUST function.   
 MUTE button 
To turn the mute function on/off.   
 VIDEO SOURCE button   
To  activate  input  selection  menu,  and  push    “ ”  or  “ ”  to  select  input 
source  from 
[HDMI], [DVI-D], [VGA],[COMPONENT], [S-VIDEO] and 
[VIDEO], and then push “SET” to switch to selected input sourc e. 
  AUDIO SOURCE button   
To activate audio selection menu, and push    “” or “ ” to select audio 
source from 
[AUDIO1], [AUDIO2], [AUDIO3] and [HDMI], and then push 
“SET” to switch to selected audio source. 
  SIZE button  
To select the picture size from [FULL], [NORMAL], [CUSTOM] , [DYNAM 
IC] and [REAL]. 
 BRIGHTNESS button 
To  start  the BRIGHTNESS   OSD selection,  and  then  push  +  or  - 
button to adjust the value. 
  UP button   
To move the highlight bar up to adjust the selected item  when OSD menu 
is on.  
To move the sub-picture up when in “PIP” mode. 
 MENU button  
To turn the OSD menu on/off. 
 PLUS button   
To increase the adjustment with OSD menu.   
  
To move the sub-picture right when in “PIP” mode.  
   
  EXIT button  
To turn to the previous OSD menu. 
  DOWN button   
To  move  the  highlight  bar  down  to  adjust  the  selected  ite m  when  OSD 
menu is on.  
To move the sub-picture down when in “PIP” mode. 
  VOLUME UP button  
To increase the audio output level. 
 VOLUME DOWN button  
To decrease the audio output level.
 
DownloadedaFromaTVDManual3comaManuals   
						

							User Manual BDL4251V 
 
12 
Operating Range for the Remote  
Control 
Point the top of the remote control towards the LCD monitors remote 
sensor during button operation. 
Use the remote control within a distance of about 7 m/ 23 ft from the 
front of the LCD monitors remote control sensor and within a 
horizontal 
and vertical angle 30° with a distance of about 3 m/ 10 ft. 
Handling the remote control 
*  Do not subject to strong shock. 
*  Do not allow water or other liquid to splash the remote control. 
If 
the remote control gets wet, wipe it dry immediately. 
* Avoid exposure to heat and steam. 
*  Other than to install the batteries, do not open the remote 
control.
 
                                     
NOTE: 
The remote control system may not function when direct sunlight or 
strong illumination strikes the remote control sensor of the LCD monitor, 
or when there is an obstacle in the radiation path.                
  
7ownlo>dedA“romA]cÅ>nu>ltcomAÅ>nu>ls  
						

							                                          User Manual BDL4251V 
 
 
13 
 
How to Mount or Attach Feet to the LCD Monitor 
  
You can install the LCD monitor in one of the following two  ways: 
  
Method 1: Attach
 and remove the optional stands 
 
How to install stands 
 
1.   Please turn the monitor off. 
2.    After inserting stand in guide block, fasten the thumbscrews on both sides of the monitor. 
  
NOTE:
 
Install 
the table stand with the longer end of the feet directing to the front. 
 
  In the upright position 
 
 
   
How to remove the stands 
1.   
Spread the protective sheet on the flat surface. 
2.    Make the monitor lying on the protective sheet. 
3.   
Remove screws using a screwdriver and place them in a safe place for reuse. 
   
						

							User Manual BDL4251V 
 
14 
 
To avoid monitor from falling  
Take measures to prevent the monitor from falling over in  case of an earthquake or other disaster might occur to lessen the probability of injury and 
damage. 
As shown in the figure below, secure the monitor to a s olid wall or pillar using rope (commercially available) strong en ough to bear the weight of the 
monitor(BDL4251V:  approx.  47.5  kg).  Screw  hooks  (com mercially  available),  of  ring  type  rather  than  C-shaped  scr ew  hooks  (with  opening),  are 
recommended. 
 
 
Caution:     Though the recommended prevention from falling is intende d to lessen the probability of injury and damage, it doesn’t assure its effectiveness 
against any kind of earthquake or disaster. 
   Before moving the monitor, remove the rope that is sec uring the monitor.   
  
Method II: Mount the monitor on the wall
 
Before  mounting  the  monitor  to  the  wall,  make  sure  that  the   system  has  been  power-off  and  you  have  obtain  a  standard  wall-mounting  kit 
(commercially available). Using mounting interface that comp ly with TÜV-GS and/or UL1678 standard in North America is recommended. 
 
 
 
                                                          
  
1. Lay a protective sheet on a table, which was wrappe d around the monitor when it was packaged, beneath the  surface as not to scratch the screen 
face.  
2.  This  device  cannot  be  installed  without  the  correct  an d  complete  mounting  accessories  (not  provided  in  the  box) .  Make  sure  you  have  all  related 
parts available for wall mounting.  
3.  Follow  the  instructions  that  come  with  the  base  mount ing  kit.  Failure  to  follow  correct  mounting  procedures  cou ld  result  in  damage  to  the 
equipment or injury to the user or installer.    Product wa rranty does not cover damage caused by improper installat ion. 
4.  For  the  wall-mounting  kit,  use  M6  mounting  screws  for  4 00x  400  mm  pattern  (having  a  length  10  mm  longer  than  th e  thickness  of  the  mounting 
bracket) and tighten them securely. (Recommended torq ue: 470 - 635Ncm).     
  
Caution:  
For preventing the monitor from falling.     Install the monitor with metal brackets for wall or ceiling insta llation (commercially available) on your own responsibility. For detailed procedures of 
installation, refer to the instructions of the metal bracket s. 
   To lessen the probability of injury and damage resulting f rom fall of the monitor in case of earthquake or other disa ster, be sure to consult the 
bracket manufacturer for installation location. 
   To lessen the risk of falling of the monitor, thread comm ercially available rope (having a load capacity at least 196 0N (200kgf)) through the handles 
at the right and left of the monitor and secure the rope  to the wall mount brackets or ceiling mount brackets.(Refe r to the first paragraph of this 
page.) 
Screw here is not supplied . 
   
						

							                                          User Manual BDL4251V 
 
 
15 
  
Ventilation Requirements for enclosure locating 
  
To allow heat to disperse, leave space between surroundin g objects as shown in the diagram below. 
 
 
 
7ownlo>dedA“romA]cÅ>nu>ltcomAÅ>nu>ls  
						

							User Manual BDL4251V 
 
16 
 
Setup Procedure  
1. Install the system on the right location   
CAUTION: 
THE LCD MONITOR MUST BE MOVED OR INSTALLED BY 
TWO OR MORE PERSONS. 
Failure to follow this caution may result in injury and damage when the LCD monitor falls.   
CAUTION: 
DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY 
YOURSELF. 
The 
LCD display must be installed by a qualified technician. 
Contact your dealer for more information.  CAUTION: 
DO NOT MOUNT OR OPERATE THE DISPLAY UPSIDE DOWN,  
FACE UP OR FACE DOWN.IT’S POSSIBILITY TO 
CLOCKWISE 90 
DEGREES MOUNT.
 BUT DO NOT COUNTERCLOCKWISE 90 
DEGREES MOUNT.
 
CAUTION: 
DO NOT INSTALL THE LCD MONITOR WHERE IT WILL BE 
EXPOSED TO DIRECT SUNLIGHT. 
Failure to follow this caution will result in display defects. 
 
IMPORTANT: 
Lay the protective sheet, which was wrapped around the LCD monitor 
when it was packaged, beneath the LCD monitor so as not to scratch the panel. 
 
2. 
Install the remote control batteries 
The remote control is powered by 1.5V AAA batteries. To 
install 
or replace batteries: 
1.   
Press and slide to open the cover. 
2.    Align 
the batteries according to the (+) and (–) indications inside 
the case. 
3.   
Replace the cover. 
 
CAUTION: 
Incorrect use of batteries can result in leaks or bursting. Be 
careful especially about the following points. 
   Place “AAA” batteries matching the + and - signs on each battery 
to the + and - signs of the battery compartment. 
    Do not mix battery types. 
    Do not combine new batteries with used ones.   It causes shorter 
battery life or leakage of batteries. 
   Remove dead batteries immediately to prevent battery 
liquid from leaking into the battery compartment. Dont touch 
exposed battery acid, it cause damage to your skin. 
NOTE: 
If 
you do not intend to use the Remote Control for a long period, 
remove 
the batteries.
3. Connect to external equipment  
   To protect the connected equipment, turn off the main power 
before making connections. 
    Please refer to section “Connectivity” P.18~P.22 for operat ions..   
4. Connect power cord 
   The power outlet socket should be installed as near to the 
equipment as possible, and should be easily accessible. 
   Fully insert the prongs into the power outlet socket. A loose 
connection may cause malfunctioning of the device. 
NOTE: 
Please refer to “Safety Operation” section of this manual for 
proper selection of AC power cord. 
                             
         
    
5. Turn on the power of the 
a
ttached external equipment  
When connected with a computer, turn on the power of the computer 
first. 
  
6. 
Operate the attached external equipment 
Display the signal from the external equipment by selecting the correct 
video and audio sources first.   
7. Adjust the sound 
Make adjustments to lower or to rise the volume as required. 
 
8. Adjust the screen   
Make adjustments to the display position or settings if required. 
  
						

							                                          User Manual BDL4251V 
 
 
17 
9. Adjust the image   
Make adjustments to brightness or contrast if required.   
10. Recommended Adjustment 
To reduce the risk of “image persistence”, please adjust the 
following items based on the application being used. 
“POWER SAVE”, “PANEL SAVING”, “DATE AND TIME”. 
 
 
11. To prevent the main power switch  
fr
om being changed  
To prevent the possibility of main power switch being carelessly 
pushed,
 please attach the main switch cover (accessory) onto it. 
NOTE: 
With the main power switch cover in place, the main power switch 
can not be turned off. Remove main power switch cover in order to 
turn off the display. 
                      
                                   
   
7ownlo>dedA“romA]cÅ>nu>ltcomAÅ>nu>ls  
						

							User Manual BDL4251V 
 
18 
 
Install the LCD Monitor in Portrait Mode 
BDL4251V can be installed in portrait position, under the following conditions:  Caution: 
Portrait mode is effective only when wall-mounted or ceiling-mounted. The feet can not be used for the monitor in portrait position. 
Placing 
the monitor in portrait position, will shorten the average life of the LCD backlight.   
Operational Environment (Temperature) shall be limited, as shown below: 
 
Temperature 5 - 35 °C / 41 - 95 °F Operational 
Environment Humidity 20 - 80 % (without condensation) 
   
Please orientate the monitor in the direction shown as the right figure: 
Do 
not place monitor in landscape in any other manner.   How to set-up  
1. 
Remove the feet if they are attached. 
2. The “              ” logo should be on the LEFT side when facing the monitor.  
 
 
             
   
   
     
How to Remove the Logo for landscape mode? 
 1. Remove the logo sticker by forcing a piece of paper unde r the logo. 
2. Using a knife, carefully remove the logo sticker with the  paper placing   
beneath.  
3. Tear off the logo sticker.  
              
How to Use the Logo Guider for Portrait Mode?  1. Before applying, make sure the guider is well shaped.    The PHILIPS                                   
sticker attached on the end of it could be folded back a s figure a.   
2. Turn  back  the logo  end  of  the  guider  and  remove  the   sticky  tape  of  the 
logo.  
3.  Slide  the  logo  guider  along  the  short  side  of  the  fron t  bezel  as  figure  c & 
then re-turn the logo end of the guider back to the righ t side. 
4. With your left hand fixing the guider, press the logo  by your right hand to 
make it stuck firmly on the front bezel.  
5. Remove the guider and leave the logo on the front be zel. 
     
 
           Clockwise                                       Counterclockwise 
 
                                                
     
                                    
DownloadedaFromaTVDManual3comaManuals       
						

							                                          User Manual BDL4251V 
 
 
19 
 
Connectivity   
Before making connections: 
*  First turn off the power of all the attached equipments before make connections. 
* Refer to the user manual included in each separate piece of equipment.   
Connectivity Diagram