Philips Bdl4251v User Manual
Have a look at the manual Philips Bdl4251v User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Public Signage
Solutions
EN User Manual
TYPE NR. BDL4251V
DownloadedaFromaTVDManual3comaManuals
User Manual BDL4251V 1 TABLE OF CONTENTS SAFETY INSTRUCTIONS ................................ .............................................................................................................................. 2 Contents ........................................... ......................................................................................................................................... 8 Connection & Button Overviews ........................ ....................................................................................................................... 9 Terminal Panel ..................................... ............................................................................................................................ 10 Remote Control ..................................... .......................................................................................................................... 11 Operating Range for the Remote Control ............. ........................................................................................................... 12 Handling the remote control ........................ ................................................................................................................... 12 How to Mount or Attach Feet to the LCD Monitor ..... ............................................................................................................. 13 Setup Procedur e................................................... ................................................................................................................... 16 Install the LCD Monitor in Portrait Mode................................................................................................................................ 18 Connectivity............................................................................................................................................................................. 19 Connectivity Diagram....................................................................................................................................................... 19 Connecting to a Personal Computer .................. .............................................................................................................. 20 Connecting to a Digital Interface Equipment........ ........................................................................................................... 21 Connecting to a DVD Player ......................... .................................................................................................................... 22 Connecting to a Stereo Amplifier ................... ................................................................................................................. 23 Connecting to a mount PC ........................... .................................................................................................................... 23 Basic Operation .................................... ................................................................................................................................... 24 Power ON and OFF Modes.............................................................................................................................................. 24 Power Indicator .................................... ........................................................................................................................... 25 Using Power Management ............................. ................................................................................................................. 25 Display Signal of V ideo Source Setting to [VIDEO] .. ........................................................................................................ 25 Picture Size ....................................... ............................................................................................................................... 25 Smart Picture Mode................................. ........................................................................................................................ 26 Audio Source Switching ............................. ...................................................................................................................... 26 Control Lock Mode .................................. ........................................................................................................................ 26 OSD Information .................................... .......................................................................................................................... 26 OSD (On-Scr een-Display) Controls................................................... ........................................................................................ 27 PICTURE ............................................ ............................................................................................................................... 28 SCREEN............................................................................................................................................................................ 30 AUDIO .............................................. ................................................................................................................................ 32 PIP (PICTURE IN PICTURE) .......................................... ..................................................................................................... 3 3 CONFIGUR ATION 1................................................. .......................................................................................................... 34 CONFIGUR ATION 2................................................. .......................................................................................................... 36 ADVANCED OPTION......................................................................................................................................................... 38 NOTE ............................................... ................................................................................................................................. 41 Featur es................................................... ................................................................................................................................ 45 Tr oubleshooting................................................... .................................................................................................................... 46 Specifications..................................... ...................................................................................................................................... 48 Pin Assignment......................................................................................................................................................................... 49 DownloadedaFromaTVDManual3comaManuals
User Manual BDL4251V 2 SAFETY INSTRUCTIONS WARNINGS AND PRECAUTIONS KNOW THESE SAFETY SYMBOLS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED S ERVICE PERSONNEL. This symbol indicates high voltage is present insid e. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature co ncerning operation and maintenance has been include d with this product. Note to CATV system installer: This reminder is provided to call CATV system instal ler’s attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall b e connected to the grounding system of the building as close to the point of cable entry as practical. Caution: FCC/CSA regulations state that any unauthorized chan ges or modifications to this equipment may void the user’s authority to operate it. Caution: To prevent electric shock, match the wide blade of plug to the wide slot, and fully insert the plug. Attention: Pour éviter les chocs électriques, introduire la la me la plus large de la fiche dans la bome correspon dante de la prise et pousser jusqu’au fond. Important: One Federal Court has held that unauthorized record ing of copyrighted TV programs is an infringement of U.S. copyright laws. Certain Canadian programs m ay also be copyrighted and any unauthorized recording in whole or in part may be in violation of these rights. TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK H AZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The Socket-outlet shall be installed near the appara tus and shall be easily accessible. Read and follow these instructions when connecting and using your computer monitor: Unplug the monitor if you are not going to use it for an extensive period of time. Unplug the monitor if you need to clean it with a s lightly damp cloth. The screen many be wiped with a dry cloth when the power is off. However, never use alcohol, s olvents or ammonia-based liquids. Consult a service technician if the monitor does not operate normally when you have followed the instr uctions in this manual. The casing cover should be opened only by qualified service personnel. Keep the monitor out of direct sunlight and away from stoves or any other heat source. Remove any object that could fall into the vents or prevent proper cooling of the monitor’s electronics . Do not block the ventilation holes on the cabinet. Keep the monitor dry. To avoid electric shock, do n ot expose it to rain or excessive moisture. If turning off the monitor by detaching power cable or DC power cord, wait for 6 seconds before attach the power cable or DC power cord for normal operation. To avoid the risk of shock or permanent damage to t he set do not expose the monitor to rain or excessive moisture. When positioning the monitor, make sure the power p lug and outlet are easily accessible. IMPORTANT: Always activate a screen saver program d uring your application. If a still image in high contrast remains on the screen for an extended period of tim e, it may leave an ‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known phenomenon that is caused by the shortcomings inherent in the LCD tec hnology. In most cases the afterimage will disappear gradually over a period of time after the power has been swit ched off. Be aware that the after-image symptom cannot be repair ed and is not covered under warranty. DownloadedaFromaTVDManual3comaManuals
User Manual BDL4251V 3 REGULATORY INFORMATION CE DECLARATION OF CONFORMITY MMD declare under our responsibility that the produ ct is in conformity with the following standards EN60950-1:2006+A11:2009 (Safety requirement of Inf ormation Technology Equipment) EN55022:2006+A1:2007 (Radio Disturbance requiremen t of Information Technology Equipment) EN55024:1998+A1:2001+A2:2003 (Immunity requirement of Information Technology Equipment) EN6100-3-2: 2006 (Limits for Harmonic Current Emis sion) EN6100-3-3:1995+A1:2001+A2:2005 (Limitation of Volta ge Fluctuation and Flicker) following provisions of directives applicable 2006/95/EC (Low Voltage Directive) 2004/108/EC (EMC Directive) 93/68/EEC (Amendment of EMC and Low Voltage Direct ive) and is produced by a manufacturing organization on ISO9000 level. FEDERAL COMMUNICATIONS COMMISSION (FCC) NOTICE (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasona ble protection against harmful interference when th e equipment is operated In a commercial environment. This equipment generat es, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, ma y cause harmful interference to radio communication s. Operation of this equipment in a residential area i s likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Use only RF shielded cable that was supplied with t he monitor when connecting this monitor to a comput er device. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture. THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE- CAUSING EQUIPMENT REGULATIONS. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device mus t accept any interference received, including interference that may cause undesired operation. DownloadedaFromaTVDManual3comaManuals
User Manual BDL4251V
4
POLISH CENTER FOR TESTING AND CERTIFICATION NOTICE
The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works
together (computer, monitor, printer, and so on) sh ould have the same power supply source.
The phasing conductor of the room’s electrical inst allation should have a reserve short-circuit protection device in the form of a fuse with
a nominal value no larger than 16 amperes (A).
To completely switch off the equipment, the power s upply cable must be removed from the power supply s ocket, which should be
located near the equipment and easily accessible.
A protection mark “B” confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-
42107 and PN-89/E-06251.
ELECTRIC, MAGNETIC AND ELECTRONMAGNETIC FIELDS (“EMF”)
1. MMD manufactures and sells many products targete d at consumers, which, like any electronic apparatus, in general have the ability to emit
and receive electromagnetic signals.
2. One of MMDs’ leading Business Principles is to t ake all necessary health and safety measures for ou r products, to comply with all
applicable legal requirements and to stay well with in the EMF standards applicable at the time of prod ucing the products.
3. MMD is committed to develop, produce and market products that cause no adverse health effects.
4. MMD confirms that if its products are handled pr operly for their intended use, they are safe to use according to scientific evidence
available today.
5. MMD plays an active role in the development of i nternational EMF and safety standards, enabling MMD to anticipate further developments
in standardization for early integration in its pro ducts.
DownloadedaFromaTVDManual3comaManuals
User Manual BDL4251V
5
INFORMATION FOR UK ONLY
WARNING - THIS APPLIANCE MUST BE EARTHED. Important:
This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this
type of plug proceed as follows:
1. Remove fuse cover and fuse.
2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type.
3. Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an
appropriate 3-pin plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 5A. If a plug
without a fuse is used, the fuse at the distributio n board should not be greater
than 5A.
Note: The severed plug must be destroyed to avoid a possible shock hazard should it
be inserted into a 13A socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured in accorda nce with the following code:
BLUE - “NEUTRAL” (“N”)
BROWN - “LIVE” (“L”)
GREEN & YELLOW - “EARTH” (“E”)
1. The GREEN AND YELLOW wire must be connected to the terminal in
the plug which is marked with the letter “E” or by the Earth symbol or
coloured GREEN or GREEN AND YELLOW.
2. The BLUE wire must be connected to the terminal w hich is marked with the letter
“N” or coloured BLACK.
3. The BROWN wire must be connected to the terminal which marked with the letter
“L” or coloured RED.
Before replacing the plug cover, make certain that the cord grip is clamped over the
sheath of the lead - not simply over the three wire s.
DownloadedaFromaTVDManual3comaManuals
User Manual BDL4251V
6
中国电 子信息产品污染控制 标识要求 (中国RoHS法规标 示要求)产品中有毒有害物 质
或元素的 名称及含 量
有毒有害物质或元素 部件名称
铅
（Pb
）
汞
（ Hg
）
镉
（ Cd
）
六价铬
（Cr 6+）
多溴联苯
（ PBB ）
多溴二苯醚
（PBDE ）
外壳
○
○
○
○
○
○
液晶面板 × × ○
○
○
○
电路板组件 × ○
○
○
○
○
附件
(
遥控器 ，电源线 ，连接线) × ○ ○ ○ ○ ○
遥控器电池 × ○
○
○
○
○
○：表示
该有毒有害物 质在该部件所有均 质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求
以下
◦
×：表示 该有毒有害物 质至少在该部件的某一均 质材料中的含量超出 SJ/T11363-2006 标准规定的
限量要求
◦
环保使用期限
此标识指期限(十年)，电子信息 产品中含有的有毒有害物 质或元素在正常使用的条件下不会发生外
泄或突 变，电子信息 产品用户使用该电子信息 产品不会对环境造成严重污染或 对其人身、财产造
成严重损害 的期限 。
User Manual BDL4251V
7
NORTH EUROPE (NORDIC COUNTRIES) INFORMATION
Placering/Ventilation
VARNING:
FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, N ÄR DU STÄLLER DIN UTRUSTNING PÅPLATS.
Placering/Ventilation
ADVARSEL:
SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG ST IKKONTAKT ER NEMT TILGÆNGELIGE.
Paikka/Ilmankierto
VAROITUS:
SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAE SSA HELPOSTI IRROTTAA PISTORASIASTA.
Plassering/Ventilasjon
ADVARSEL:
NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ.
END-OF-LIFE DISPOSAL
Your new TV/Monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the
amount of reusable materials and to minimize the am ount to be disposed of.
Please find out about the local regulations on how to dispose of your old monitor from your local Phil ips dealer.
(For customers in Canada and U.S.A.)
This product may contain lead and/or mercury. Dispo se of in accordance to local-state and federal regulations. For additional information on
recycling contact www.eia.org (Consumer Education I nitiative)
WASTE ELECTRICAL AND ELECTRONIE EQUIPMENT-WEEE
Attention users in European Union private household s
This marking on the product or on its packaging ill ustrates that, under European Directive 2002/96/EG
governing used electrical and electronic appliances , this product may not be disposed of with normal
household waste. You are responsible for disposal o f this equipment through a designated waste electrical
and electronic equipment collection. To determine t he locations for dropping off such waste electrical and electronic, contact your local
government office, the waste disposal organization that serves your household or the store at
which you purchased the product.
Attention users in United States:
Like all LCD products, this set contains a lamp wit h Mercury. Please dispose of according to all Local, State and Federal Laws. For
the disposal or recycling information, contact: www .mygreenelectronics.com or www.eiae.org.
DownloadedaFromaTVDManual3comaManuals
User Manual BDL4251V
8
Video Signal Cable (D-SUB to D-SUB Cable)
Contents The BDL4251V monitor pack* should include:
LCD monitor
Power cord (1.8 m)
VGA Signal Cable (1.8 m)
CD User Manual & QSG
Remote Control and AAA Batteries
Cable belt x 3 (For tightening cables)
Main switch cover
Screw for Main Switch cover x 2
BNC TO RCA adapter x 5
Logo guider
Clamper
Screw for Clamper x 2
BNC TO RCA adapter x 5
User’s Manual
Screw for Main switch cover
(M3 x 6) x 2
Main
switch cover
* The supplied power cord varies depending on destination.
For EU For China For North
America
Power cord
Cable belt x 3
(For tightening the power cord
and VGA / HDMI cable)
Remote Control and AAA
Batteries
* You might like to save the package box and packing material for shipping the monitor. * The following components are prepared as options.
External Speakers
Table stand
Xxxxxxxxxxxxxx
xxxxxxxxxxxxxx
xxxxxxxxxxxxxx
xxxxx
Logo guider
(
* Please make sure that for all other regions, apply a power cord that conforms
to
the AC voltage of the power socket and has been approved by and complies
with the safety regulations of the particular country.
Clamper
Screw for Clamper
(M4 x 8) x 2
7ownlo>dedA“romA]cÅ>nu>ltcomAÅ>nu>ls
User Manual BDL4251V 9 Connection & Button Overviews Control Panel POWER button ( ) : To switch the power on/off. MUTE button : To switch the audio mute ON/OFF. INPUT button : To set the function while OSD menu is on or to activat e input selection menu while OSD menu is off. PLUS (+) button : To increase the adjustment while OSD menu is on, or to increase the audio output level while the OSD menu is off. MINUS (-) button : To decrease the adjustment while OSD menu is on, or to decrease the audio output level while the OSD menu is off. UP () button : To move the highlight bar up to adjust the selected item w hile OSD menu is on, or to activate the OSD menu when the OSD menu is off. DOWN ( ) button : To move the highlight bar down to adjust the selected ite m while OSD menu is on, or to activate the OSD menu when the OSD menu is off. EXIT button : To return to previous menu while OSD menu is on or to activate the OSD menu when the OSD menu is off. Main Power Switch : To turn the main power on/off. Remote control sensor, Power indicator and ambient light sensor : To receive the IR signal from the remote control. The indicator would show green when the LCD monitor is active and would turn red when the LCD is POWER OFF. While in t he case of the system is in power save mode, it would show both green and red. Wh en SCHEDULE is enabled, it would blink green and glow red . If the indicator blinks red , it tells that a failure is detected. The image brightness will be auto adjusted when “LIGHT SE NSOR” set to “ON” on OSD menu. NOTE: Keyboard Control Lock Mode This function completely disables the access to all Keyboa rd Control functions. To enable the keyboard control lock, press both of “ ” and “ ” buttons and hold down continuously for more than 3 s econds. To recover back to the user mode, press both of “ ” and “ ” and hold continuously for three 3 seconds.