Philips Bdl4251v User Manual

User Manual BDL4251V 
 
20 
 
Connecting to a Personal Computer 
 As you finish the connection between the computer and the LCD monitor, you could play the contents in the computer 
and display them on the LCD 
monitor. 
Connecting the LCD Monitor to a Personal Computer 
   To achieve this, apply the supplied VGA signal cable (mini D-sub 15 pin to mini D-sub 15 pin) to make connection between a PC and the LCD 
monitor   
(VGA
 IN connector). 
   When connecting more than one LCD monitors to a PC, apply...

                                          User Manual BDL4251V 
 
 
21 
   
Connecting to a Digital Interface Equipment 
 Connections can be made between the LCD monitor and other digital equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard.   
Connect the LCD Monitor to a Computer with a Digital Output  
   The HDMI , DVI-D IN connector accepts a HDMI cable. 
   HDMI and DVI-D can receive HDMI video signals from  either a HDMI output of for...

User Manual BDL4251V 
 
22 
 
Connecting to a DVD Player 
 As you finish the connection between the DVD player and the LCD monitor, you could display the contents from the played  DVD on the LCD 
monitor. You might like to refer to your DVD player’s manual for further information. 
 
Connect the LCD Monitor to a DVD Player 
   To achieve this, apply a 3x components cable (Y, Pb, Pr) with BNC connectors at one end and RCA connec tors at the other end between DVD 
player and display. In case you can only...

                                          User Manual BDL4251V 
 
 
23 
 
Connecting to a Stereo Amplifier 
 You can connect your stereo amplifier to your LCD monitor. Refer to your amplifiers manual for further information.   
Connect the LCD Monitor to a Stereo Amplifier 
     Turn on the LCD monitor and the amplifier only after all connections have been finished. 
     Apply 2 RCA cables (audio left and right) to make connection between the amplifier (audio in) and the  LCD monitor (audio out). 
...

User Manual BDL4251V 
 
24 
 
Basic Operation 
 
Power ON and OFF Modes 
 The LCD monitor power indicator will turn green while powered on and will turn red while powered off. The monitor can be powered on or 
off using the following three options: 
 
 
1.  Pr
essing the Main Power Switch.  NOTE: 
When the Main Power Switch is used to power off the 
LCD monitor, the remote control, the power button and the indicator 
will not work. Make sure to turn the Main Power Switch on before 
using 
the other two...

                                          User Manual BDL4251V 
 
 
25 
 
Power Indicator 
 
 Status 
Power ON  Green 
Power Standby  Red 
Power OFF  LED Off 
Diagnosis    
(Detecting failure)  Red Blinking 
* See troubleshooting 
  
Using Power Management 
 
Please turn off the LCD monitor when it will not be  used for long time. This could potentially increase the life and decrease the power consumption of 
the LCD monitor.  
Standby mode:  Push the power button on the remote control or on  the monitor...

User Manual BDL4251V 
 
26 
  
Smart Picture Mode 
HDMI , VGA  HIGHBRIGTH  STANDARD  sRGB 
 
COMPONENT, VIDEO    HIGHBRIGTH  STANDARD  CINEMA 
 
 
Audio Source Switching 
 You can select the audio source using the AUDIO SOURCE  button on the remote control. 
 
HDMI    HDMI  AUDIO1  AUDIO2  AUDIO3 
 
  
Control Lock Mode 
This function disables the operation o buttons so that th e adjustments you make are not active when they are pressed. 
To disable the buttons, press and hold down the   and   buttons...

                                          User Manual BDL4251V 
 
 
27 
 
  
  
 
  
OSD (On-Scr
een-Display) Controls 
         
 
Remote Control                   
 
Control Panel 
Press MENU button to open Main menu.   Press 
UP or DOWN button to select sub-menu. 
 
        
Press EXIT button to open Main menu. Press UP or DOWN button to select. 
Press SET button to enable setting.     
         
Press INPUT button to enable the setting. 
Press UP or DOWN, and PLUS or MINUS button to select function,...

User Manual BDL4251V 
 
28 
 
Main-Menu    
PICTURE 
BRIGHTNESS  Adjusts the overall image and background screen brightness.   Press + button to increase brightness. Press - button to decrease brightness. 
      
     
CONTRAST  Adjusts the image brightness for the input signal.   Press + button to increase contrast.   Press - button to decrease contrast. 
       
 
   
SHARPNESS  This function is digitally capable to keep crisp images at any timing. It is adjustable to get a distinct image or a soft one...

                                          User Manual BDL4251V 
 
 
29 
 
COLOR * : INPUT HDMI , DVI-D(INPUT MODE-HD), COMPONENT, S-VIDEO, VIDEO only 
 
Adjusts the color of the screen. Press + button to increase color depth.   
Press - button to decrease color depth. 
     
 
     
COLOR TEMPERATURE  
 Is used to adjust the color temperature. The image becomes reddish as the color temperature decreases, and becomes bluish as the color temperature increases. 
             
COLOR CONTROL  The color levels...