Philips Bdl4251v User Manual

User Manual BDL4251V 
 
10 
  
Terminal Panel 
 
 
 EXTERNAL CONTROL (mini D-Sub 9 pin)  
This is for serial connection when multiple BDL4251V monitors  are connected.  To achieve remote  management through RS232C commands (refer  to 
the  RS232C  remote  control  user  manual),  connect  the  RS 232C  OUT  connector  from  a  computer  or  from  a  different  BDL4251V  monitor  to  the 
RS232C  IN  connector  from  your  BDL4251V  monitor.  The  sa me  RS232C  commands  can  be  looped  through  by...

                                          User Manual BDL4251V 
 
 
11 
 
Remote Control 
                                                     
  POWER button   
To turn the power on/off.    
If  LED  Power  Indicator  on  the  monitor  is  not  lightening,  t hen  the 
remote control will not work.    
  SMART PICTURE button 
To select smart picture mode from [HIGHBRIGHT], [STANDAR D],   
[sRGB], [CINEMA]
.     
HIGHBRIGHT: for moving image such as Video 
STANDARD: for images (Factory setting) 
sRGB:...

User Manual BDL4251V 
 
12 
Operating Range for the Remote  
Control 
Point the top of the remote control towards the LCD monitors remote 
sensor during button operation. 
Use the remote control within a distance of about 7 m/ 23 ft from the 
front of the LCD monitors remote control sensor and within a 
horizontal 
and vertical angle 30° with a distance of about 3 m/ 10 ft. 
Handling the remote control 
*  Do not subject to strong shock. 
*  Do not allow water or other liquid to splash the remote...

                                          User Manual BDL4251V 
 
 
13 
 
How to Mount or Attach Feet to the LCD Monitor 
  
You can install the LCD monitor in one of the following two  ways: 
  
Method 1: Attach
 and remove the optional stands 
 
How to install stands 
 
1.   Please turn the monitor off. 
2.    After inserting stand in guide block, fasten the thumbscrews on both sides of the monitor. 
  
NOTE:
 
Install 
the table stand with the longer end of the feet directing to the front. 
 
  In the...

User Manual BDL4251V 
 
14 
 
To avoid monitor from falling  
Take measures to prevent the monitor from falling over in  case of an earthquake or other disaster might occur to lessen the probability of injury and 
damage. 
As shown in the figure below, secure the monitor to a s olid wall or pillar using rope (commercially available) strong en ough to bear the weight of the 
monitor(BDL4251V:  approx.  47.5  kg).  Screw  hooks  (com mercially  available),  of  ring  type  rather  than  C-shaped  scr ew...

                                          User Manual BDL4251V 
 
 
15 
  
Ventilation Requirements for enclosure locating 
  
To allow heat to disperse, leave space between surroundin g objects as shown in the diagram below. 
 
 
 
7ownlo>dedA“romA]cÅ>nu>ltcomAÅ>nu>ls  

User Manual BDL4251V 
 
16 
 
Setup Procedure  
1. Install the system on the right location   
CAUTION: 
THE LCD MONITOR MUST BE MOVED OR INSTALLED BY 
TWO OR MORE PERSONS. 
Failure to follow this caution may result in injury and damage when the LCD monitor falls.   
CAUTION: 
DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY 
YOURSELF. 
The 
LCD display must be installed by a qualified technician. 
Contact your dealer for more information.  CAUTION: 
DO NOT MOUNT OR OPERATE THE DISPLAY UPSIDE DOWN,  
FACE UP...

                                          User Manual BDL4251V 
 
 
17 
9. Adjust the image   
Make adjustments to brightness or contrast if required.   
10. Recommended Adjustment 
To reduce the risk of “image persistence”, please adjust the 
following items based on the application being used. 
“POWER SAVE”, “PANEL SAVING”, “DATE AND TIME”. 
 
 
11. To prevent the main power switch  
fr
om being changed  
To prevent the possibility of main power switch being carelessly 
pushed,
 please attach the main...

User Manual BDL4251V 
 
18 
 
Install the LCD Monitor in Portrait Mode 
BDL4251V can be installed in portrait position, under the following conditions:  Caution: 
Portrait mode is effective only when wall-mounted or ceiling-mounted. The feet can not be used for the monitor in portrait position. 
Placing 
the monitor in portrait position, will shorten the average life of the LCD backlight.   
Operational Environment (Temperature) shall be limited, as shown below: 
 
Temperature 5 - 35 °C / 41 - 95 °F...

                                          User Manual BDL4251V 
 
 
19 
 
Connectivity   
Before making connections: 
*  First turn off the power of all the attached equipments before make connections. 
* Refer to the user manual included in each separate piece of equipment.   
Connectivity Diagram