Philips Bdl3221vs User Manual

 
HDCP • • • • 
   
COMPOSITE • • 
 
• 
S VIDEO • • 
• 
• 
EXT • • 
• 
• • 
 
 
3.3.2.4 FACTORY RESET 
Command: RE 
Function: Reset system to default state.  
Data Range: 
 The following values are applied only if PC analog/digital input is 
selected. 
 [00h] – Position settings only 
 Recall all those settings of the current timing, including 
horizontal/vertical position, phase and clock. 
 This option has no effect in PC digital input. 
 [01h] – Color settings only 
  Reset color related settings...

 
3.3.2.5 SLEEP TIMER 
Command: SL 
Function: Set the sleep timer for all video inputs. 
Data Range: 
 [00h] – OFF 
 [01h] – 15 minutes 
 [02h] – 30 minutes 
 [03h] – 45 minutes 
 [04h] – 60 minutes 
 [05h] – 90 minutes 
 [06h] – 120 minutes 
 [07h] – 180 minutes 
 [08h] – 240 minutes 
 
 Query is not applicable in this command. 
 This command is not supported in PC Analog/Digital inputs. 
  
Model
Source PAL NTSC AP CHINA 
PC ANALOG     
PC DIGITAL 
(DVI)     
HDCP • • • • 
    
COMPOSITE • • • • 
S...

 
3.3.2.7 N/A 
  
Model
Source PAL NTSC AP CHINA 
PC ANALOG     
PC DIGITAL 
(DVI)     
HDCP     
    
COMPOSITE     
S VIDEO    
 
EXT     
    
 
 
3.3.2.8 REMOTE CONTROLLER 
Command: RC 
Function: Enable/Disable remote controller. 
Data Range: 
 [00h] – Disable. 
 [01h] – Enable. 
 Once the remote controller is disabled by this command, the controller can 
be reactivated for a period of time by the procedure described in sectio\
n 
2.2. 
 Query is not supported in this command. 
  
Model
Source PAL...

 
 [00h] – Enable keypad function. 
 [01h] – Disable keypad function. 
 Once the keypad controller is disabled by this command, the controller 
can be reactivated for a period of time from wake up or power on 
 Query is not supported in this command. 
  
Model
Source PAL NTSC AP CHINA 
PC ANALOG • • • • 
PC DIGITAL 
(DVI) • • • • 
HDCP • • • • 
    
COMPOSITE • • • • 
S VIDEO • • • • 
EXT • • • • 
   
 
 
3.3.3 Picture Group 
3.3.3.1 LANGUAGE 
Command: LA 
Function: Select the OSD language.  
Data...

 
3.3.3.2 AUTO ADJUST 
Command: AA 
Function: Automatically adjust the picture’s geometry (horizontal and vertical 
position), phase, and pixel clock of PC analog input. 
Data Range: 
 No data is required for this command. 
 This command works only when the input source is PC analog. 
  
Model
Source PAL NTSC AP CHINA 
PC ANALOG • • • • 
PC DIGITAL 
(DVI)     
HDCP     
     
COMPOSITE     
S VIDEO     
EXT     
    
 
 
 
 
3.3.3.3 COLOR SETTING  
Command: CO 
Function: Change the color temperature...

 
Function: Control the color level of Ext/ CVBS/ S-video input
Data Range: 
 [00h] to [CEh] 
 
 Once this command is executed, the smart picture setting is switched to \
“PERSONAL” automatically and the brightness/ contrast/ color/ sharpness 
of the “PERSONAL” smart picture setting will be set to the values \
of the 
current setting. 
  
Model
Source PAL NTSC AP CHINA 
PC ANALOG     
PC DIGITAL 
(DVI)     
HDCP • • • • 
   
COMPOSITE • 
 
• • 
S VIDEO • 
• 
• • 
EXT • 
• 
• • 
 
• 
  
 
 
 
 
3.3.3.5...

 
    
COMPOSITE • • • • 
S VIDEO • • • • 
EXT • • • • 
    
 
 
 
  
 
3.3.3.6 PIP VIDEO SOURCE 
Command: PV 
Function: Change the video source of PIP. 
Data Range: 
 For PAL / VIDEO / BASIC models: 
 
 
 [01h] – Composite 
 [02h] – S-video  
 [03h] – Ext  
 
  
Model
Source PAL NTSC AP CHINA 
   
COMPOSITE • • • • 
S VIDEO • • • • 
EXT • • • • 
 
 
 
  
 
2838   100   05424
 
 
 
[ NAME ] 
                      Philips 
 21 14023
 

 
3.3.3.7 CHANNEL SELECTION 
Command: CH 
Function: Output the selected channel. 
Data Range: 
 For PAL, AP, and CHINA models: 
 [01h] to [64h] – channel number, from 1 to 100 
 
 For NTSC model: 
 [01h] to [45h] – channel number, from 1 to 69 in air broadcast 
 [01h] to [7Dh] – channel number, from 1 to 125 in cable transmission \
  
 
  
Model
Source PAL NTSC AP CHINA 
PC ANALOG • • • • 
PC DIGITAL 
(DVI) • • • • 
HDCP • • • •
    
COMPOSITE • • • 
S VIDEO • • • 
• 
EXT • • • 
• 
   • 
 
 
3.3.4...

 
  
 
 
3.3.4.2 VOLUME 
Command: VO 
Function: Control the volume of the monitor. 
Data Range: 
 [00h] to [64h] – volume level 
  
Model
Source PAL NTSC AP CHINA 
PC ANALOG • • • • 
PC DIGITAL 
(DVI) • • • • 
HDCP • • • • 
    
COMPOSITE • • • • 
S VIDEO • • • • 
EXT • • • • 
    
 
 
 
3.3.4.3 MUTE 
Command: MU 
Function: Mute on/off. 
Data Range: 
 [00h] – Mute OFF  
 [01h] – Mute ON  
 “Mute ON” means the target monitor has no sound output. 
  
Model
Source PAL NTSC AP CHINA 
PC ANALOG • • • • 
PC...

Connecting to Your PC,DVD/VCR etc.
Connecting to Your PC, DVD/VCR etc. 
Product Description • Accessory Pack • Connecting to Your PC, DVD/VCR etc. • Getting Started • Optimizing 
Performance
Accessory Pack
Unpack all the parts 
Power cableRemote control & batteries
   
DVI-D cable VGA signal cable
   
 
E-DFU pack  
 
file:///D|/My%20Documents/dfu/BDL_27/english/420wn6/INSTALL/CONNECT.HTM \
(1 of 7)2006-03-10 1:34:29 PM