Philips Bdl3221vs User Manual
Have a look at the manual Philips Bdl3221vs User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 76
... \
where:
= The ASCII character [06h], to tell the transmitter that the command has
been acknowledged.
= The ASCII characters [15h], to tell the transmitter that the command
has not been acknowledged, because the command itself is not valid
for any reason.
= , i.e. ASCII characters [1Bh] and [25h].
= 3 ASCII characters each of which ranging from [30h] to [39h], which are
used as monitor address.
= An ASCII character which identifies the command type, i.e. the...](http://img.usermanuals.tech/thumb/59/54394/w64_philips_bdl3221vs-user-manual-75.png "Page 76
... \
where:
= The ASCII character [06h], to tell the transmitter that the command has
been acknowledged.
= The ASCII characters [15h], to tell the transmitter that the command
has not been acknowledged, because the command itself is not valid
for any reason.
= , i.e. ASCII characters [1Bh] and [25h].
= 3 ASCII characters each of which ranging from [30h] to [39h], which are
used as monitor address.
= An ASCII character which identifies the command type, i.e. the...")
![Page 77
COMPOSITE
S VIDEO
EXT •
3.3.1 Geometry Group
3.3.1.1 VIDEO MODE
Command: VM
Function: Set the format of the screen output for video inputs.
Data Range:
[00h] – WIDE SCREEN(STANDARD MODE)
[01h] – 4:3
[02h] – ZOOM 16:9 (FULL SCREEN)
[03h] – SUPER WIDE (NONLINEAR SCALING)
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
3.3.1.2 PIP SIZE
Command: PS
Function:...](http://img.usermanuals.tech/thumb/59/54394/w64_philips_bdl3221vs-user-manual-76.png "Page 77
COMPOSITE
S VIDEO
EXT •
3.3.1 Geometry Group
3.3.1.1 VIDEO MODE
Command: VM
Function: Set the format of the screen output for video inputs.
Data Range:
[00h] – WIDE SCREEN(STANDARD MODE)
[01h] – 4:3
[02h] – ZOOM 16:9 (FULL SCREEN)
[03h] – SUPER WIDE (NONLINEAR SCALING)
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
3.3.1.2 PIP SIZE
Command: PS
Function:...")
![Page 78
S VIDEO
EXT
3.3.1.3 PIP POSITION
Command: PP
Function: Control the PIP position.
Data Range:
[00h] – Upper left corner
[01h] – Upper right corner
[02h] – Bottom right corner
[03h] – Bottom left corner
This command is only supported in PC Analog/Digital inputs and when the
PIP is not OFF.
Model
Source PAL NTSC AP CHINA
PC ANALOG • • • •
PC DIGITAL
(DVI) • • • •
HDCP
COMPOSITE
S VIDEO
EXT
3.3.1.4 ZOOM Type
Command: ZT...](http://img.usermanuals.tech/thumb/59/54394/w64_philips_bdl3221vs-user-manual-77.png "Page 78
S VIDEO
EXT
3.3.1.3 PIP POSITION
Command: PP
Function: Control the PIP position.
Data Range:
[00h] – Upper left corner
[01h] – Upper right corner
[02h] – Bottom right corner
[03h] – Bottom left corner
This command is only supported in PC Analog/Digital inputs and when the
PIP is not OFF.
Model
Source PAL NTSC AP CHINA
PC ANALOG • • • •
PC DIGITAL
(DVI) • • • •
HDCP
COMPOSITE
S VIDEO
EXT
3.3.1.4 ZOOM Type
Command: ZT...")
![Page 79
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
3.3.1.5 ZOOM ID
Command: ZD
Function: Select Zoom ID .
Data Range: It depend on zoom type.
[00h] : [00h] ----- Zoom type 1x1(Zoom off)
[00h] : [0Fh] ----- Zoom type 4x4
[00h] : [08h] ----- Zoom type 3x3
[00h] : [03h] ----- Zoom type 2x2
[00h] : [04h] ----- Zoom type 1x5
0
•0 •1 •2 •3
•4 •5 •6 •7
•8 •9 •A •B
•C •D •E •F
•0 •1 •2
•3 •4 •5
•6 •7 •8
•0 •1
•2 •3
•0 •1 •2...](http://img.usermanuals.tech/thumb/59/54394/w64_philips_bdl3221vs-user-manual-78.png "Page 79
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
3.3.1.5 ZOOM ID
Command: ZD
Function: Select Zoom ID .
Data Range: It depend on zoom type.
[00h] : [00h] ----- Zoom type 1x1(Zoom off)
[00h] : [0Fh] ----- Zoom type 4x4
[00h] : [08h] ----- Zoom type 3x3
[00h] : [03h] ----- Zoom type 2x2
[00h] : [04h] ----- Zoom type 1x5
0
•0 •1 •2 •3
•4 •5 •6 •7
•8 •9 •A •B
•C •D •E •F
•0 •1 •2
•3 •4 •5
•6 •7 •8
•0 •1
•2 •3
•0 •1 •2...")
![Page 80
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP
COMPOSITE
S VIDEO
EXT
3.3.2.2 STANDBY
Command: SB
Function: Standby ON/OFF.
Data Range:
[00h] – Standby OFF
[01h] – Standby ON
“Standby ON” means the set enters standby mode.
Query is not supported in this command.
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
3.3.2.3 LIGHT...](http://img.usermanuals.tech/thumb/59/54394/w64_philips_bdl3221vs-user-manual-79.png "Page 80
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP
COMPOSITE
S VIDEO
EXT
3.3.2.2 STANDBY
Command: SB
Function: Standby ON/OFF.
Data Range:
[00h] – Standby OFF
[01h] – Standby ON
“Standby ON” means the set enters standby mode.
Query is not supported in this command.
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
3.3.2.3 LIGHT...")
![Page 81
HDCP • • • •
COMPOSITE • •
•
S VIDEO • •
•
•
EXT • •
•
• •
3.3.2.4 FACTORY RESET
Command: RE
Function: Reset system to default state.
Data Range:
The following values are applied only if PC analog/digital input is
selected.
[00h] – Position settings only
Recall all those settings of the current timing, including
horizontal/vertical position, phase and clock.
This option has no effect in PC digital input.
[01h] – Color settings only
Reset color related settings...](http://img.usermanuals.tech/thumb/59/54394/w64_philips_bdl3221vs-user-manual-80.png "Page 81
HDCP • • • •
COMPOSITE • •
•
S VIDEO • •
•
•
EXT • •
•
• •
3.3.2.4 FACTORY RESET
Command: RE
Function: Reset system to default state.
Data Range:
The following values are applied only if PC analog/digital input is
selected.
[00h] – Position settings only
Recall all those settings of the current timing, including
horizontal/vertical position, phase and clock.
This option has no effect in PC digital input.
[01h] – Color settings only
Reset color related settings...")
![Page 82
3.3.2.5 SLEEP TIMER
Command: SL
Function: Set the sleep timer for all video inputs.
Data Range:
[00h] – OFF
[01h] – 15 minutes
[02h] – 30 minutes
[03h] – 45 minutes
[04h] – 60 minutes
[05h] – 90 minutes
[06h] – 120 minutes
[07h] – 180 minutes
[08h] – 240 minutes
Query is not applicable in this command.
This command is not supported in PC Analog/Digital inputs.
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP • • • •
COMPOSITE • • • •
S...](http://img.usermanuals.tech/thumb/59/54394/w64_philips_bdl3221vs-user-manual-81.png "Page 82
3.3.2.5 SLEEP TIMER
Command: SL
Function: Set the sleep timer for all video inputs.
Data Range:
[00h] – OFF
[01h] – 15 minutes
[02h] – 30 minutes
[03h] – 45 minutes
[04h] – 60 minutes
[05h] – 90 minutes
[06h] – 120 minutes
[07h] – 180 minutes
[08h] – 240 minutes
Query is not applicable in this command.
This command is not supported in PC Analog/Digital inputs.
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP • • • •
COMPOSITE • • • •
S...")
![Page 83
3.3.2.7 N/A
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP
COMPOSITE
S VIDEO
EXT
3.3.2.8 REMOTE CONTROLLER
Command: RC
Function: Enable/Disable remote controller.
Data Range:
[00h] – Disable.
[01h] – Enable.
Once the remote controller is disabled by this command, the controller can
be reactivated for a period of time by the procedure described in sectio\
n
2.2.
Query is not supported in this command.
Model
Source PAL...](http://img.usermanuals.tech/thumb/59/54394/w64_philips_bdl3221vs-user-manual-82.png "Page 83
3.3.2.7 N/A
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP
COMPOSITE
S VIDEO
EXT
3.3.2.8 REMOTE CONTROLLER
Command: RC
Function: Enable/Disable remote controller.
Data Range:
[00h] – Disable.
[01h] – Enable.
Once the remote controller is disabled by this command, the controller can
be reactivated for a period of time by the procedure described in sectio\
n
2.2.
Query is not supported in this command.
Model
Source PAL...")
![Page 84
[00h] – Enable keypad function.
[01h] – Disable keypad function.
Once the keypad controller is disabled by this command, the controller
can be reactivated for a period of time from wake up or power on
Query is not supported in this command.
Model
Source PAL NTSC AP CHINA
PC ANALOG • • • •
PC DIGITAL
(DVI) • • • •
HDCP • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
3.3.3 Picture Group
3.3.3.1 LANGUAGE
Command: LA
Function: Select the OSD language.
Data...](http://img.usermanuals.tech/thumb/59/54394/w64_philips_bdl3221vs-user-manual-83.png "Page 84
[00h] – Enable keypad function.
[01h] – Disable keypad function.
Once the keypad controller is disabled by this command, the controller
can be reactivated for a period of time from wake up or power on
Query is not supported in this command.
Model
Source PAL NTSC AP CHINA
PC ANALOG • • • •
PC DIGITAL
(DVI) • • • •
HDCP • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
3.3.3 Picture Group
3.3.3.1 LANGUAGE
Command: LA
Function: Select the OSD language.
Data...")
![Page 86
Function: Control the color level of Ext/ CVBS/ S-video input
Data Range:
[00h] to [CEh]
Once this command is executed, the smart picture setting is switched to \
“PERSONAL” automatically and the brightness/ contrast/ color/ sharpness
of the “PERSONAL” smart picture setting will be set to the values \
of the
current setting.
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP • • • •
COMPOSITE •
• •
S VIDEO •
•
• •
EXT •
•
• •
•
3.3.3.5...](http://img.usermanuals.tech/thumb/59/54394/w64_philips_bdl3221vs-user-manual-85.png "Page 86
Function: Control the color level of Ext/ CVBS/ S-video input
Data Range:
[00h] to [CEh]
Once this command is executed, the smart picture setting is switched to \
“PERSONAL” automatically and the brightness/ contrast/ color/ sharpness
of the “PERSONAL” smart picture setting will be set to the values \
of the
current setting.
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP • • • •
COMPOSITE •
• •
S VIDEO •
•
• •
EXT •
•
• •
•
3.3.3.5...")
HDCP • • • •
COMPOSITE • •
•
S VIDEO • •
•
•
EXT • •
•
• •
3.3.2.4 FACTORY RESET
Command: RE
Function: Reset system to default state.
Data Range:
The following values are applied only if PC analog/digital input is
selected.
[00h] – Position settings only
Recall all those settings of the current timing, including
horizontal/vertical position, phase and clock.
This option has no effect in PC digital input.
[01h] – Color settings only
Reset color related settings including:
Set color temperature to “NORMAL Color”,
Set brightness and contrast level to 50%, and
[02h] – All settings
Recall all position and color related settings.
There is no data required for HDCP/CVBS/ S-video/EXT
input. The reset function for these input sources sets the brightness/ color/
contrast/ sharpness to default values, tint to 50% level, video mode to
“16:9 / Normal Mode”, recalls the treble/ bass/ spatial effect values for the\
current smart sound setting, and set the balance to the middle.
Query is not supported in this command.
Model
Source PAL NTSC AP CHINA
PC ANALOG • • • •
PC DIGITAL
(DVI) • • • •
HDCP • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
2838 100 05424
[ NAME ]
Philips
15 14023
3.3.2.5 SLEEP TIMER
Command: SL
Function: Set the sleep timer for all video inputs.
Data Range:
[00h] – OFF
[01h] – 15 minutes
[02h] – 30 minutes
[03h] – 45 minutes
[04h] – 60 minutes
[05h] – 90 minutes
[06h] – 120 minutes
[07h] – 180 minutes
[08h] – 240 minutes
Query is not applicable in this command.
This command is not supported in PC Analog/Digital inputs.
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
3.3.2.6 N/A
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP
COMPOSITE
S VIDEO
EXT
2838 100 05424
[ NAME ]
Philips
16 14023
3.3.2.7 N/A
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP
COMPOSITE
S VIDEO
EXT
3.3.2.8 REMOTE CONTROLLER
Command: RC
Function: Enable/Disable remote controller.
Data Range:
[00h] – Disable.
[01h] – Enable.
Once the remote controller is disabled by this command, the controller can
be reactivated for a period of time by the procedure described in sectio\
n
2.2.
Query is not supported in this command.
Model
Source PAL NTSC AP CHINA
PC ANALOG • • • •
PC DIGITAL
(DVI) • • • •
HDCP • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
3.3.2.9 KEYPAD LOCK CONTROLLER
Command: KL
Function: Enable/Disable keypad controller.
Data Range:
2838 100 05424
[ NAME ]
Philips
17 14023
[00h] – Enable keypad function.
[01h] – Disable keypad function.
Once the keypad controller is disabled by this command, the controller
can be reactivated for a period of time from wake up or power on
Query is not supported in this command.
Model
Source PAL NTSC AP CHINA
PC ANALOG • • • •
PC DIGITAL
(DVI) • • • •
HDCP • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
3.3.3 Picture Group
3.3.3.1 LANGUAGE
Command: LA
Function: Select the OSD language.
Data Range:
[00h] – English
[01h] – Spanish
[02h] – French
[03h] – Deutsch
[04h] – Italian
[05h] – Simplified Chinese
Simplified Chinese is only supported in AP and CHINA model.
Model
Source PAL NTSC AP CHINA
PC ANALOG • • • •
PC DIGITAL
(DVI) • • • •
HDCP • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
2838 100 05424
[ NAME ]
Philips
18 14023
3.3.3.2 AUTO ADJUST
Command: AA
Function: Automatically adjust the picture’s geometry (horizontal and vertical
position), phase, and pixel clock of PC analog input.
Data Range:
No data is required for this command.
This command works only when the input source is PC analog.
Model
Source PAL NTSC AP CHINA
PC ANALOG • • • •
PC DIGITAL
(DVI)
HDCP
COMPOSITE
S VIDEO
EXT
3.3.3.3 COLOR SETTING
Command: CO
Function: Change the color temperature used for PC analog/digital.
This function is applied to PC analog/digital input only. PC analog and
PC digital inputs shares the same color temperature.
Data Range:
[00h] – Normal Color
[01h] – Cool Color
[02h] – Warm Color
Model
Source PAL NTSC AP CHINA
PC ANALOG • • • •
PC DIGITAL
(DVI) • • • •
HDCP
COMPOSITE
S VIDEO
EXT
3.3.3.4 VIDEO COLOR
Command: VC
2838 100 05424
[ NAME ]
Philips
19 14023
Function: Control the color level of Ext/ CVBS/ S-video input
Data Range:
[00h] to [CEh]
Once this command is executed, the smart picture setting is switched to \
“PERSONAL” automatically and the brightness/ contrast/ color/ sharpness
of the “PERSONAL” smart picture setting will be set to the values \
of the
current setting.
Model
Source PAL NTSC AP CHINA
PC ANALOG
PC DIGITAL
(DVI)
HDCP • • • •
COMPOSITE •
• •
S VIDEO •
•
• •
EXT •
•
• •
•
3.3.3.5 INPUT SELECT
Command: IS
Function: Input source selection of the target monitor.
Data Range:
[00h] – PC analog
[01h] – PC digital DVI
[02h] – HDCP
[04h] – CVBS video
[05h] – S-video
[06h] – EXT
The availability table of each input source is as following:
Model
Source PAL NTSC AP CHINA
PC ANALOG • • • •
PC DIGITAL
(DVI) • • • •
HDCP • • • •
2838 100 05424
[ NAME ]
Philips
20 14023
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
3.3.3.6 PIP VIDEO SOURCE
Command: PV
Function: Change the video source of PIP.
Data Range:
For PAL / VIDEO / BASIC models:
[01h] – Composite
[02h] – S-video
[03h] – Ext
Model
Source PAL NTSC AP CHINA
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
2838 100 05424
[ NAME ]
Philips
21 14023
3.3.3.7 CHANNEL SELECTION
Command: CH
Function: Output the selected channel.
Data Range:
For PAL, AP, and CHINA models:
[01h] to [64h] – channel number, from 1 to 100
For NTSC model:
[01h] to [45h] – channel number, from 1 to 69 in air broadcast
[01h] to [7Dh] – channel number, from 1 to 125 in cable transmission \
Model
Source PAL NTSC AP CHINA
PC ANALOG • • • •
PC DIGITAL
(DVI) • • • •
HDCP • • • •
COMPOSITE • • •
S VIDEO • • •
•
EXT • • •
•
•
3.3.4 Audio Group
3.3.4.1 SMART SOUND
Command: SS
Function: Select the smart sound setting of the target monitor.
Data Range:
[00h] – PERSONAL sound setting
[01h] – NEWS sound setting
[02h] – MUSIC sound setting
[03h] – THEATRE sound setting
Model
Source PAL NTSC AP CHINA
PC ANALOG • • • •
PC DIGITAL
(DVI) • • • •
HDCP •
• • •
COMPOSITE • • •
S VIDEO
•
• • •
EXT
•
• • • •
2838 100 05424
[ NAME ]
Philips
22 14023
3.3.4.2 VOLUME
Command: VO
Function: Control the volume of the monitor.
Data Range:
[00h] to [64h] – volume level
Model
Source PAL NTSC AP CHINA
PC ANALOG • • • •
PC DIGITAL
(DVI) • • • •
HDCP • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
3.3.4.3 MUTE
Command: MU
Function: Mute on/off.
Data Range:
[00h] – Mute OFF
[01h] – Mute ON
“Mute ON” means the target monitor has no sound output.
Model
Source PAL NTSC AP CHINA
PC ANALOG • • • •
PC DIGITAL
(DVI) • • • •
HDCP • • • •
COMPOSITE • • • •
S VIDEO • • • •
EXT • • • •
2838 100 05424
[ NAME ]
Philips
23 14023
Connecting to Your PC,DVD/VCR etc. Connecting to Your PC, DVD/VCR etc. Product Description • Accessory Pack • Connecting to Your PC, DVD/VCR etc. • Getting Started • Optimizing Performance Accessory Pack Unpack all the parts Power cableRemote control & batteries DVI-D cable VGA signal cable E-DFU pack file:///D|/My%20Documents/dfu/BDL_27/english/420wn6/INSTALL/CONNECT.HTM \ (1 of 7)2006-03-10 1:34:29 PM