Philips Bdl3221vs User Manual

							
Connecting to Your PC,DVD/VCR etc.
Base Screw pack 
2x10 W Detachable Speakers   
 
RETURN TO TOP OF THE PAGE 
Setting up and connecting your Monitor
CAUTION: Ensure that the power to the Monitor is switched off before the 
installation.
- Connecting the Monitor
l     Connect the cables to the rear of your Monitor according to the numbers:\
file:///D|/My%20Documents/dfu/BDL_27/english/420wn6/INSTALL/CONNECT.HTM \
(2 of 7)2006-03-10 1:34:29 PM 
						

							
Connecting to Your PC,DVD/VCR etc.
 
RETURN TO TOP OF THE PAGE 
- Connect to PC 
l     Connect the cables to the back of your computer by following step 1~5.
l     If your monitor displays the computer image the installation has been co\
mpleted successfully.
l     If installation was not successful, see the Troubleshooting section.
l     For installation of the monitor driver for Microsoft Windows®, see th\
e Monitor Driver Installation section 
(Getting Started).
file:///D|/My%20Documents/dfu/BDL_27/english/420wn6/INSTALL/CONNECT.HTM \
(3 of 7)2006-03-10 1:34:29 PM 
						

							
Connecting to Your PC,DVD/VCR etc.
RETURN TO TOP OF THE PAGE 
- Connect to DVD/VCD/VCRConnect to DVD/VCR/VCD through S-VIDEO
l     Connect to DVD/VCR/VCD through S-VIDEO
 
l     Connect to DVD/VCR /VCD through SCART (for Europe only)
file:///D|/My%20Documents/dfu/BDL_27/english/420wn6/INSTALL/CONNECT.HTM \
(4 of 7)2006-03-10 1:34:29 PM 
						

							
Connecting to Your PC,DVD/VCR etc.
 
 
l     Connect to DVD/VCR /VCD through composite video (CVBS)
 
 
l     Connect to DVD/VCR /VCD through component video (YPbPr)
RETURN TO TOP OF THE PAGE 
file:///D|/My%20Documents/dfu/BDL_27/english/420wn6/INSTALL/CONNECT.HTM \
(5 of 7)2006-03-10 1:34:29 PM 
						

							
Connecting to Your PC,DVD/VCR etc.
Progressive video connections for digital high-definition picture
 
 
file:///D|/My%20Documents/dfu/BDL_27/english/420wn6/INSTALL/CONNECT.HTM \
(6 of 7)2006-03-10 1:34:29 PM 
						

							
Connecting to Your PC,DVD/VCR etc.
Matrix information connection
To set up multiple display information connections via RS232,VGA, and CV\
BS. 
RETURN TO TOP OF THE PAGE 
   
file:///D|/My%20Documents/dfu/BDL_27/english/420wn6/INSTALL/CONNECT.HTM \
(7 of 7)2006-03-10 1:34:29 PM 
						

							
Getting Started
Getting Started 
Product Description • Connecting to Your PC, DVD/VCR etc.• Driver Installation • 
Optimizing Performance 
Driver Installation 
Use the information file ( .inf) for Windows® 95/98/2000/Me/XP or l\
ater
 
The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play\
 requirements for 
Windows® 95/98/2000/Me/XP. This information file ( .inf) should be \
installed in order that your 
Philips monitor can be enabled from the Monitor dialog box in Windows®\
 95/98/2000/Me/XP 
and the Plug & Play application can be activated. The installation proce\
dure based on 
Windows® 95 OEM Release 2 , 98 , Me, XP and 2000 is specified as fol\
lows.
For Windows® 95 
1.  Start Windows® 95 
2.  Click on the Start button, point to Settings, and then click on Con\
trol Panel. 
3.  Double click on the Display Icon. 
4.  Select the Settings tab then click on Advanced.... 
5.  Select the Monitor button, point to Change... then click on Have Di\
sk.... 
6.  Click on the Browse... button, select the appropriate drive F: ( CD-R\
OM Drive) then click 
on the OK button. 
7.  Click on the OK button then select your monitor model and click on the\
 OK. 
8.  Click on the Close button. 
For Windows® 98 
1.  Start Windows® 98 
2.  Click on the Start button, point to Settings, and then click on Con\
trol Panel. 
3.  Double click on the Display Icon. 
4.  Select the Settings tab then click on Advanced.... 
5.  Select the Monitor button, point to Change... then click on Next 
6.  Select Display a list of all the drivers in a specific location, so you\
 can choose the driver 
you want. then click on Next and then click on Have Disk.... 
7.  Click on the Browse... button, select the appropriate drive F: ( CD-R\
OM Drive) then click 
on the OK button. 
8.  Click on the OK button then select your monitor model and click on the\
 Next button. 
9.  Click on the Finish button then the Close button. 
file:///D|/My%20Documents/dfu/BDL_27/english/420wn6/INSTALL/gt_start.htm\
 (1 of 3)2006-03-10 1:34:29 PM 
						

							
Getting Started
For Windows® Me 
1.  Start Windows® Me 
2.  Click on the Start button, point to Settings, and then click on Con\
trol Panel. 
3.  Double click on the Display Icon. 
4.  Select the Settings tab then click on Advanced.... 
5.  Select Monitor button, then click on Change... button. 
6.  Select Specify the location of the driver(Advanced) and click on the\
 Next button. 
7.  Select Display a list of all the drivers in a specific location, so you\
 can choose the driver 
you want, then click on Next and then click on Have Disk.... 
8.  Click on Browse... button, select the appropriate drive F: ( CD-ROM D\
rive) then click on 
the OK button. 
9.  Click on the OK button, select your monitor model and click on the Ne\
xt button. 
10.  Click on Finish button then the Close button. 
For Windows® 2000 
1.  Start Windows® 2000 
2.  Click on the Start button, point to Settings, and then click on Con\
trol Panel. 
3.  Double click on the Display Icon. 
4.  Select the Settings tab then click on Advanced.... 
5.  Select Monitor 
- If the Properties button is inactive, it means your monitor is prope\
rly configured. Please 
stop installation. 
- If the Properties button is active. Click on Properties button. Pl\
ease follow the steps 
given below. 
6.  Click on Driver and then click on Update Driver... then click on the\
 Next button. 
7.  Select Display a list of the known drivers for this device so that I ca\
n choose a specific 
driver, then click on Next and then click on Have disk.... 
8.  Click on Browse... button then select the appropriate drive F: ( CD-R\
OM Drive). 
9.  Click on the Open button, then click on the OK button. 
10.  Select your monitor model and click on the Next button. 
11.  Click on the Finish button then the Close button. 
If you can see the Digital Signature Not Found window, click on the Y\
es button. 
For Windows® XP
1.  Start Windows® XP
2.  Click on the Start button and then click on Control Panel.
3.  Select and click on the category Printers and Other Hardware
4.  Click on the Display Icon.
5.  Select the Settings tab then click on the Advanced button.
6.  Select Monitor tab
- If the Properties button is inactive, it means your monitor is prope\
rly configured. Please 
stop installation.
file:///D|/My%20Documents/dfu/BDL_27/english/420wn6/INSTALL/gt_start.htm\
 (2 of 3)2006-03-10 1:34:29 PM 
						

							
Getting Started
- If the Properties button is active, click on Properties button.
Please follow the steps below.
7.  Click on the Driver tab and then click on Update Driver... button.
8.  Select the Install from a list or specific location [advanced] radio b\
utton and then click on 
the Next button.
9.  Select the Dont Search. I will choose the driver to install radio but\
ton. Then click on the 
Next button.
10.  Click on the Have disk... button, then click on the Browse... button\
 and then select the 
appropriate drive F: (CD-ROM Drive).
11.  Click on the Open button, then click the OK button.
12.  Select your monitor model and click on the Next button.
- If you can see the has not passed Windows® Logo testing to verify \
its compatibility with 
Windows® XP message please click on the Continue Anyway button. 
13.  Click on the Finish button then the Close button.
14.  Click on the OK button and then the OK button again to close the Dis\
play_Properties 
dialog box.
If your Windows® 95/98/2000/Me/XP version is different or you need mo\
re detailed installation 
information, please refer to Windows® 95/98/2000/Me/XP users manual.\
  RETURN TO TOP OF THE PAGE
file:///D|/My%20Documents/dfu/BDL_27/english/420wn6/INSTALL/gt_start.htm\
 (3 of 3)2006-03-10 1:34:29 PM 
						

							
Your Philips F1rst Choice Warranty
Your Philips F1rst Choice Warranty
Thank you for purchasing this Philips monitor. 
All Philips monitors are designed and manufactured to high standards and\
 deliver 
high-quality performance, ease of use and ease of installation. Should y\
ou 
encounter any difficulties while installing or using this product, pleas\
e contact the 
Philips helpdesk directly to benefit from your Philips F1rst Choice Warr\
anty. This 
three-year service warranty entitles you to a swap model on-site if your\
 monitor 
turns out to be faulty or defective. Philips aims at a swap within 48 ho\
urs of your 
call being received.
What is covered? 
The Philips F1rst Choice Warranty applies within Andorra, Austria, Belgi\
um, Cyprus, Denmark, 
France, Germany, Greece, Finland, Ireland, Italy, Liechtenstein, Luxembo\
urg, Monaco, the 
Netherlands, Norway, Portugal, Sweden, Switzerland, Spain and the United\
 Kingdom and only for 
monitors originally designed, manufactured, approved and/or authorized f\
or usage within these 
countries.
Warranty coverage begins as from the day you buy your monitor. For three years thereafter, your 
monitor will be swapped by at least an equivalent monitor in case of def\
ects provided for under the 
warranty coverage.
The swap monitor remains yours and Philips keeps the defective/original \
monitor. For the swap 
monitor the warranty period remains equal to that of your original monit\
or, being 36 months as from 
the purchase date of your original monitor.
What is excluded?
The Philips F1rst Choice Warranty applies provided the product is handle\
d properly for its intended 
use, in accordance with its operating instructions and upon presentation\
 of the original invoice or 
cash receipt, indicating the date of purchase, dealers name and model a\
nd production number of 
the product.
The Philips F1rst Choice Warranty may not apply if:
l     The documents have been altered in any way or made illegible; 
l     The model or production number on the product has been altered, deleted,\
 removed or 
made illegible; 
l     Repairs or product modifications and alterations have been executed by u\
nauthorized 
service organizations or persons; 
file:///D|/My%20Documents/dfu/BDL_27/english/warranty/war_1st.htm (1 of\
 3)2006-03-10 1:34:36 PM