Philips 58pfl9955h User Manual

6.2TV and remote control
The TV does  not switch  on
• Switch the  TV  off  and  on  again with  the  switch on  the  bottom of
the  TV.
• Check the  power cable  connection.
• Try using  the  keys  on  the  TV  to  switch on.
The TV does  not switch  on from standby
• Check that  the  batteries of  the  remote control are not  empty or
weak. Check their + /  - orientation.
• Try using  the  keys  on  the  TV  to  switch on.
The TV does  not respond to the remote  control
• Check that  the  batteries of...

6.3TV channels
Some  TV channels  are gone
• Check if  the  correct list  is selected in  the  Channel list. With  the
Channel list  on  screen, press  o (Options) and  select the  list  you
need with  Select list.
• A  channel could be hidden  in  the  Channel list. Read more about
Channel list  in  Help > Use your TV > Menus > Browse.
No digital  channel found during installation
• Check if  the  TV  supports DVB -T or DVB -C  in  your  country.
Check the  Digital  TV  Country  Compatibility  sticker...

6.4Picture and sound
No picture
• Check if  the  antenna  is connected properly.
• Check if  the  correct device is selected and  connected properly.
• Check the  contrast or brightness  setting in  h > Setup > TV
settings > Contrast or Brightness.
The picture  is  poor
• Bad weather can  influence the  picture quality.
• Check if  the  antenna  is connected properly.
• Non-earthed  audio devices,  neon  lights, high  buildings  or
mountains can  influence the  picture quality.  Try to  improve the...

6.5Devices
HDMI  connections
• The HDMI -HDCP procedure  might  take a  few  seconds before the
picture from a  device appears.
• If  the  TV  does not  recognise the  device and  there is no  picture, try
switching from one  device to  another and  back  again to  restart  the
HDCP procedure.  Or switch the  device off  and  back  on  again.
• If  sound interruptions  occur  persistently, see the  user manual of  the
device to  check the  output settings. If  that  does not  help,  connect an
additional...

6.6Multimedia
The files on my USB device are not shown
• Set your  device (camera)  to  ‘Mass  Storage Class’  compliant.
• The USB  device may  need specific driver  software. Unfortunately,
this  software cannot  be downloaded to  your  TV.
• Not  all audio and  picture files  are supported. See  the  list  in  Help >
Specifications > Multimedia.
Files  from a  USB device do not play  back  smoothly
• The transfer performance  of  the  USB  device limits the  transfer rate.
The files on my PC are not...

6.7Network
Wireless  network not found or  distorted
• Microwave ovens, Dect  phones  or other WiFi  11b  devices  in  your
neighbourhood might  disturb  the  wireless network.
• Make  sure that  the  firewalls  in  your  network  allow access  to  the
TV  wireless connection.
• If  the  wireless network  does not  work  properly in  your  home, try
the  wired network  installation.  Read Help > Setup > Network >
Wired installation.
Net  TV does  not work
• If  the  connection  to  the  router is OK,...

7
7.1
Specifications
Software
Software version
To  view the  current  TV  software version, press  h > Setup >
Software  settings and  press  OK.  Select  Current software info and
read Version:.
Open  source software
This  television contains open  source  software.  Philips  hereby offers
to  deliver  or make  available,  upon  request, for  a  charge no  more
than the  cost  of  physically  performing source  distribution, a  complete
machine  readable  copy of  the  corresponding  source  code  on...

7.2Environmental
Eco-label
Philips  continuously focuses on  lowering  the  environmental  impact  of
its  innovative consumer products. We  aim our  efforts towards
environmental  improvements during  manufacturing,  reduction  of
harmful  substances,  energy-efficient  use, end-of -life  instructions and
product  recycling.
Thanks  to  our  environmental  effort, this  TV  has  been awarded the
European  Ecolabel —the  flower- (www.ecolabel.eu).
You  can  find  detailed information  on  standby  energy...

7.3Power and reception
Power
Product  specifications are  subject to change without notice.  For more
specification  details of  this  product see  www.philips.com/support.
Power
• Mains power :  AC  220-240V  +/ -10%
• Ambient temperature :  5°C to  35°C
• Standby power consumtion  :  < 0.15W
• Power saving features  :  Light sensor, Eco  mode, Picture mute (for
radio),  Auto  switch-off  timer, Eco  settings menu.
Reception
• Aerial  input :  75 ohm coaxial  (IEC75)
• Satellite  aerial input :  75 ohm...

7.4Display and sound
Display  /  Picture
• Diagonal  size  :  147cm  /  58
• Picture enhancement :
- Perfect  Pixel  HD Engine
- LED  Pro
- 400Hz  Clear  LCD*
• Display type :  LCD Full HD, 2D segmented LED  backlight
• Panel  resolution :  2560 x 1080p
• Color  processing  :  2250 trillion  colors 17bit RGB
• Brightness  :  500 cd/m2
• Dynamic contrast :  10.000.000:1
• Response  time (typical)  :  0,5  (BEW equiv.)  ms
* 400Hz  Clear  LCD :  displays  400 scenes per second by  combining
advanced  200Hz...