Philips 58pfl9955h User Manual

4
4.1
Setup
Picture, Sound, Ambilight
Smart settings
You  can  adjust  each Smart setting with  the  settings in  Picture or
Sound  in  Setup,  TV  settings. Adjust  the  brightness  for  a  particular
Smart picture or adjust  the  bass for  a  Smart sound.
To  return  to  the  original  smart  setting values, undoing the
adjustments you  made,  first  set up the  TV  in  the  smart  setting you
want  to  reset. Then  press  h > Setup > TV settings,  select Reset,
press  OK and  confirm.
Read more about...

Light sensor
The built -in  light  sensor automatically  adjusts the  picture, together
with  Ambilight, to  the  lighting  conditions  of  the  room.  To  switch on,
select Light sensor and  press  OK.  To  switch off,  press  OK again.
52Setup /  Picture, Sound,  Ambilight
 

4.2Channels
Reorder  and rename
You  can  reorder  and  rename channels  in  the  Channel list.
To  reorder  or rename a  channel, read Help > Use your TV >
Menus > e Browse.
Update channels
On  first use,  the  TV  installed  all channels in the  Channel  list. If  the  TV
installed  digital  channels, the  TV  can automatically  update the  Channel
list with  new  channels. You can also start an  update of  the  Channel  list
yourself.  The  update is  for digital  channels only.
Automatic channel...

To  correct the  TV  clock,  press  h > Setup > TV settings >
Preferences > Clock and  select Country  dependent.  Select
Daylight saving and  select the  appropriate setting.
To  set the  time and  date manually, select Manual.  Then  select Time
or Date.
54Setup /  Channels
 

4.3Satellite channels
Introduction
As  well as  the  DVB -T and  DVB -C  reception, this  TV  has  a  built -in
satellite DVB -S receiver.  With  a  satellite dish antenna  connected,
you  can  receive digital  satellite  channels.  You  do not  need an
external  satellite receiver.
LNB
An LNB  -Low Noise  Block -downconverter- captures the  signals
from a  satellite and  is mounted  at the  end of  the  pole on  the  dish
antenna.  The TV  can  receive signals  from 4 different  LNBs.
Installation
With...

If  satellite channels are  already  installed,  you  can update the  channel  list
with  possible  new  channels from all installed  satellites.
To  update the  satellite channels,  press  h > Setup > Search  for
satellite.  Select  Update channels and  press  OK.  The TV  scans the
satellites  for  new  channels  and  adds them to  the  list. Empty channels
are removed from the  list. The update can  take several  minutes per
satellite. When the  update has  finished,  the  Channel list  for  satellite...

4.4Network
Benefits
Browse  PC
If  you  connect the  TV  to  a  home  network, you  can  play photos,
music and  videos from your  computer  or storage  device.  Once the
network  is installed on  the  TV,  you  can  find  and  play the  files  from
your  PC  on  the  TV  screen.
Net  TV
If  you  connect the  TV  to  a  home  network, you  can  link up the  TV
to  Net TV.  Net TV  offers  Internet services  and  websites tailored to
your  TV.  Play music and  videos,  consult infotainment,  rent  movies...

Install Wi -Fi  MediaConnect
1 Insert the  Wi-Fi MediaConnect  CD -ROM  in  your  PC.  The CD -
ROM  disc that  came  with  the  TV.
2 Your  PC  starts your  Internet browser  and  opens the  Wi-Fi
MediaConnect  download page  - www.philips.com/wifimediaconnect.
On the  website,  you  can  check the  necessary PC  system
requirements.
3 Enter  the  code  printed on  the  CD -ROM  envelope.
4 Click the  Download now button to  download the  free  Wi-Fi
MediaConnect  software.
5 Once downloaded, start the...

4.5Devices
EasyLink HDMI-CEC
With the  TV  remote control you  can operate devices that have  EasyLink
(HDMI- CEC)  and are  connected  with  an  HDMI  cable. Devices with
EasyLink automatically  show their activity  in the  Home  menu.  The  TV
comes with  EasyLink switched  on.
With  an  EasyLink  device connected, EasyLink  offers  the  following:
•  One touch play
Insert a  disc and  press  Play on  the  device.  The TV  switches on  from
standby  and  starts playing the  disc.
•  System  standby...

With  a  delay  value  set up on  the  HTS,  you  need to  switch off  Audio
Out delay on  the  TV  if  the  HTS  has  this  delay  set up for  all its
output connections. To  switch off  Audio Out  delay,  press  h and
select Setup > TV settings > Preferences > Audio  Out delay.  Select
Off and  press  OK.
If  you  cannot  set up a  delay  on  the  HTS  or its  maximum setting is
insufficient, you  can  switch off  the  Perfect  Natural  Motion  picture
processing  of  the  TV.  To  switch off  Perfect...