Philips 58pfl9955h User Manual
Here you can view all the pages of manual Philips 58pfl9955h User Manual. The Philips manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 71
If you do not use the HDMI -ARC connection on the TV and the device, add a digital audio cable (cinch coaxial). Digital HD receiver First, use 2 antenna cables to connect the device to the TV. Use an HDMI cable to connect the device to the TV. Connections / Connect devices71
Page 73
5.4Connect more devices Game Connect a game console to the side or back of the TV. You can use an HDMI, YPbPr or Scart connection. If your game console only has Video (CVBS) and Audio L/R output, use a Video Audio L/R to Scart adapter to connect to the Scart connection. Picture delay To prevent picture delay while gaming, close Help and press s (Adjust) and select Smart picture > Game and press OK. After gaming, do not forget to select the Smart picture you...
Page 74
To view pictures stored on your digital photo camera, you can connect the camera directly to the TV. Use the USB connection on the side of the TV to connect. Switch on the camera after you made the connection. If the list with the content of the camera does not appear automatically, your camera might need to be set to transfer its content with PTP (Picture Transfer Protocol). Read the user manual of the digital photo camera. Camcorder Connect a camcorder...
Page 75
TV as PC monitor You can connect the TV to your home network wireless and with Wi-Fi MediaConnect, you can use the TV as a PC monitor. Read Help > Setup > Network > Wi -Fi MediaConnect. Read on to connect a computer to the TV as a PC monitor wired. You can use a VGA cable or a DVI to HDMI adapter. Use a VGA cable to connect the PC to the VGA connector and an audio L/R cable to connect the VGA Audio L/R to the back of the TV. Use a DVI to HDMI...
Page 76
Ideal TV setting Set the TV Picture format to Unscaled for the sharpest picture quality. While watching TV, press o, select Picture format and select Unscaled. For a list of supported resolutions see Help > Specifications > Display resolutions. Decoder Use a scart cable to connect a decoder that decodes analogue antenna channels. Use the EXT1 connector on the back of the TV. You have to assign the TV channel as a channel to be decoded. Then assign the connection...
Page 77
5.5Network Wireless To set up the wireless network connection, read Help > Setup > Network. Wired To set up the wired network connection, read Help > Setup > Network Connect the router to the TV with a network cable. To fullfill EMC regulations, use a shielded FTP Cat. 5E ethernet cable. Connections / Network77
Page 78
5.6SD card Memory size To download rented videos from Net TV, you need to insert an SD memory card in the TV SD card slot. Once formatted, leave the card permanently in the slot. SD memory size We recommend an SDHC (High Capacity) Class 2 card with a minimum of 4GB memory. For HD movies, a minumum of 8GB memory. Read more about renting videos in Help > Use your TV > Net TV > Video stores. Insert the card Make sure to unlock the SD memory card before you insert it. To...
Page 79
5.7Common Interface CAM CAM Scrambled digital TV channels can be decoded with a Conditional Access Module (CAM). Digital TV service operators provide the CAM when you subscribe to their services. Contact a digital TV service operator for more information and to see terms & conditions. Insert a CAM Switch off the TV before inserting a CAM. Look on the CAM for the correct method of insertion. Incorrect insertion can damage the CAM and the TV. Look for the common...
Page 80
6 6.1 Troubleshooting Contact information If the advice and suggestions in Troubleshooting do not help resolve the problem, try switching the TV off and back on again. Warning If your TV breaks down, NEVER try to repair the TV yourself. Consumer Care If the TV problem is not solved you can call the Philips Consumer Care hotline in your country. Look up the TV model and serial number before you call. Find the telephone number on the documentation that came with...