Philips 46pfl9715k User Manual

4
4.1
Setup
Picture and sound
Smart  settings
If   you   select  a  Smart  setting  in   the   ADJUST   menu,  you   can   again
change  the   settings   of   the   selected  Smart  setting  with   the   Picture
and  sound   settings   in   Setup.  The  Smart  setting  remembers  your
changes.
Reset   a  Smart   setting
To  reset   a  Smart  setting  to  its  original   values,  select  the   Smart
setting  you   want   to  reset   in   the   ADJUST   menu.  Then   press   h
>  Setup  > TV  settings ,...

Auto   switch   off
If   no   keys   on   the   TV   remote   control   were  pressed   during  a  4 -
hour  period,  the   TV   switches  off   automatically  to  save   energy.
You   can  switch  off   this   Auto   switch   off .
If   you   use  the   TV   as   a  monitor   or  use  a  digital   receiver   to  watch
TV   (a  set   top   box  -  STB)   and  you   do   not   use  the   remote
control   of   the   TV,   switch   off   the   automatic  switch   off.
42Setup   /   Picture   and  sound
 

4.2Ambilight
Placement
For  the   best  Ambilight  effect   :
•   Dim   the   lighting   conditions   in   the   room  and  position   the   TV
up  to  25  cm  away  from  the   wall.
•   Adjust  Ambilight  according  to  the   colour  of   your   wall  at  home
in   the   Wall   colour  setting.
•   To   prevent   poor   infrared  remote   control   reception,   position
your   devices  out   of   sight  of   Ambilight.
Adjust
To   open   the   Adjust  menu,  press   tADJUST .
To   close,   press   t...

4.3Channels
Reorder and rename
You   can   reorder   and  rename  channels   in   the   Channel   list.
To   reorder   or  rename  a  channel,   read  Help > Use   your  TV  >
Watch  TV  > Channel  list .
Update channels
The  TV   puts  all   installed   channels   in   the   Channel   list.  If   you
receive   digital   channels,  you   can   set   the   TV   to  automatically
update   the   list   with   new   channels.  You   can   also  start   an   update
of   the   Channel   list   yourself....

DVB -C   channel  installation
For  ease  of   use,   all   DVB-C   settings   are   set   to  automatic.   If   your
DVB-C   provider  gave  you   specific   DVB-C   values,  like   a  symbol
rate  or  a  frequency,   enter  these  values   when   the   TV   asks   for
them   during  installation.
DVB -T   +   DVB -C
You   can   set   up  your   TV   for   DVB-T   and  DVB-C.  Install   one
system   followed  by   the   other.  When   both  installations  are
complete,  the   Channel   list   will...

4.4Satellite channels
Introduction
As   well   as   the   DVB-T   and  DVB-C   reception,   this   TV   has   a  built -
in   satellite   DVB -S   receiver .  With   a  satellite   dish  antenna
connected,  you   can   receive   digital   satellite  channels.  You   do   not
need  an   external  satellite   receiver.
LNB
An   LNB   (Low   Noise   Block-downconverter)   captures  the   signals
from  a  satellite   and  is  mounted   at  the   end   of   the   pole   on   the
dish  antenna.   The  TV   can...

Update channels
If   satellite   channels   are   already   installed,  you   can   update   the
channel  list   with   possible   new   channels   from  all   installed   satellites.
To  update   the   satellite   channels,  press   h > Setup  > Search   for
satellite .  Select   Update  channels   and  press  OK.  The  TV   scans
the   satellites   for   new   channels   and  adds   them   to  the   list.  Empty
channels   are   removed  from  the   list.  The  update   can   take  several
minutes  per...

4.5Network
Benefits
Browse  PC
If   you   connect   the   TV   to  a  home   network,   you   can   play  photos,
music  and  videos   from  your   computer  or  storage  device.   Once
the   network   is  installed   on   the   TV,   you   can   find  and  play  the   files
from  your   PC  on   the   TV   screen.
Net   TV
If   you   connect   the   TV   to  a  home   network,   you   can   link  up  the
TV   to  Net  TV.   Net  TV   offers  Internet  services   and  websites
tailored  to  your   TV....

3  Enter  the   code   printed   on   the   CD-ROM  envelope.
4   Click   the   Download   now  button  to  download   the   free  Wi-Fi
MediaConnect   software.
5   Once  downloaded,  start   the   file  Wi-Fi
MediaConnect_setup.exe.  Follow   the   instructions   on   screen.
TV  network   name
If   you   have   more   then  one  TV   in   your   home   network,   you   can
rename  this   TV.   To   rename  this   TV  in   the   network,   press   h >
Setup  > Network  settings   and  select TV...

4.6Devices
EasyLink HDMI- CEC
With   EasyLink   HDMI -CEC  your   TV   and  the   connected   devices
can   work   together.  You   can   use  the   TV   remote   control   to
operate  EasyLink   devices.   The  device   needs  to  be  connected   with
an   HDMI   cable.  Devices  with   EasyLink   appear   automatically  in   the
Home  menu.
Setup
The  TV   comes   with   EasyLink   switched   on.
Make   sure  that  all   HDMI -CEC  settings   are   properly  set   up  on
the   connected   EasyLink...