Philips 46pfl9715k User Manual

4.7Universal access
Switch on
With   Universal   access   switched   on,  the   TV   is  set   for   use  for
hearing   and  visually   impaired  people.
Switch   on
If   you   did  not   switch   on   Universal   access  during  the   installation,
you   can   still  switch   it   on   in   Setup.
To   switch   on   Universal   access,  press   h > Setup  > TV  settings
>  Preferences  > Universal  access .  Select  On  and  press   OK.
With   Universal   access   switched   on   in   Setup,  the...

4.8Software
Current  version
To   view   the   current  TV   software   version,  press  h > Setup  >
Software   settings   and  press  OK.  Select   Current  software  info
and  read  Version:
Update from Internet
If   the   TV   is  connected   to  the   Internet,   you   may   receive   a
message  from  Philips  to  update   the   TV   software.  You   need  a
high -speed  (broadband)   Internet  connection.
If   you   receive   this   message,   we  recommend   you   carry   out   the
update....

5
5.1
Connections
First connections
Power cable
Insert   the   power   cable   into  the   power   socket  of   the   TV.
When   disconnecting  the   power   cable,  always  pull   the   plug,   never
the   cable.
Although   this   TV   has   a  very  low  standby   power   consumption,
switch   off   the   TV   with   the   power   switch   to  save   energy  if  you
do   not   use  the   TV   for   a  long  period   of   time.
Read  more   about   the   power   switch   in  Help > To   begin  > Keys
on...

5.2About cables
Cable  quality
Before   you   connect   devices  to  the   TV,   check   which  connectors
are   available   on   the   device.   Connect  the   device   to  the   TV   with
the   highest  quality  connection   available.  Good  quality  cables
ensure  a  good   transfer  of   picture   and  sound.   Read  the   other
chapters  of   About  cables .
The  connections   diagrams  shown   in   Help > Connections  >
Connect  devices   are   recommendations.   Other  solutions   are
possible....

Video
If   you   have   a  device   with   only  a Video  (CVBS)   connection,  you
need  to  use  a  Video   to  SCART   adapter   (not   supplied).  Connect
the   adapter  to  the   SCART  connection   of   the   TV.   You   can   add
the   Audio  L/R  connections   (mini-jack   3.5  mm).
VGA
Use  a  VGA  cable   (DE15   connector)   to  connect   a  computer  to
the   TV.   With   this   connection   you   can   use  the   TV   as   a  computer
monitor.   You   can   add   an   Audio  L/R  cable   for...

5.3Connect devices
SoundBar
Use  an   HDMI   cable   to  connect   the   device   to  the   TV.
If   you   use  the   HDMI -ARC   connections   on   both  TV   and  device,
no   other   cable   is  needed.   If   not,  read  on.
If   you   do   not   use  the   HDMI -ARC   connection,  add   a  digital   audio
cable   (cinch   coaxial).
Blu- ray Disc  / DVD player
Use  an   HDMI   cable   to  connect   the   device to the TV.
56Connections  /   Connect  devices
 

Home Theatre System  with  disc  player
Use  an   HDMI   cable   to  connect   the   device   to  the   TV.
If   you   use  the   HDMI -ARC   connections   on   both  TV   and  device,
no   other   cable   is  needed.   If   not,  read  on.
If   you   do   not   use  the   HDMI -ARC   connection,  add   a  digital   audio
cable   (cinch   coaxial).
Connections  /   Connect  devices57
 

Audio   to  Video   synchronisation   (sync)
If   the   sound   does  not   match  with   the   video   on   screen,  you   can
set   a  delay   on   most  DVD  Home  Theatre  Systems   to  match  the
sound   and  video.
Read  more   about   Audio  to  Video  sync   in  Help > Setup  >
Devices  > Audio   to  Video   sync .
Do   not   connect   the   audio   signal  from  a  DVD  player   or  other
device   directly   to  the   Home  Theatre  System.  Always  route   the
sound   through  the   TV...

Digital receiver  / Sat.
If   you   use  a  digital   receiver   to  watch   TV   (a  set   top   box  -  STB)
and  you   do   not   use  the   remote   control   of   the   TV,   then  switch
off   the   automatic  switch   off.  This   will   prevent   the   TV   from
switching   off   automatically  after   a  4   hour  period   without   a  key
press   on   the   remote   control   of   the   TV.
To   switch   off   the   automatic  switch   off,  press   the  green  key  while
you   are   watching...

Then   use  an   HDMI   cable   to  connect   the   digital   receiver   to  the
TV.
Finally,  use  an   HDMI   cable   to  connect   the   Disc   Recorder  to  the
TV.
Dig. receiver  + Disc - R + Home Theatre
If   you   use  a  digital   receiver   to  watch   TV   (a  set   top   box  -  STB)
and  you   do   not   use  the   remote   control   of   the   TV,   then  switch
off   the   automatic  switch   off.  This   will   prevent   the   TV   from
switching   off   automatically  after   a  4   hour...