Philips 32pf9631d User Manual

EN
41
Camera, Camcorder, Game
1. Connect your camera, camcorder or game as
shown.
2. Connect to 
VIDEO2and AUDIO L3for
mono equipment. For stereo equipment also
connect 
AUDIO R3.
S-VHS quality with an S-VHS camcorder is
obtained by connecting the S-VHS cables with
the 
S-VIDEOinput 1and AUDIOinputs
3.
Headphone
1. Insert the plug into the headphone socket L
as shown.
2. The headphone impedance must be between 8
and 4000 Ohm. The headphone socket has a
3.5 mm jack.
In the Sound menu select Headphone...

42
EN
Pr Pb Y
DIGITAL
AUDIO AUDIO
HDTV & Progressive 
DISPLAY SYNCHRONIZED
480p, 576p, 720p, 1080i
IN
IN L R
EXT3
AUDIO OUTAUDIO
OUTL RDIGITAL
AUDIO
OUT
HDMI 1  HDMI 2  ANTENNA75o ooPC-VGAEXT2 EXT1o oAUDIO IN L/R
Pr Pb YDIGITAL
AUDIO AUDIO
HDTV & Progressive 
DISPLAY SYNCHRONIZED
480p, 576p, 720p, 1080iIN
IN L REXT3
AUDIO OUTAUDIO
OUTL RDIGITAL
AUDIO
OUT
HDMI 1 
HDMI  ETHERNET ANTENNAVGA EXT2 EXT1 AUDIO OUT
DIGITAL
AUDIO
IN
HDMI 2  ANTENNA75o ooPC-VGA AUDIO IN L/Ro o
EXT3
EXT2 EXT1ETHERNET o
AUDIO IN...

EN
43
Connect a VCR or DVD recorder
With a eurocable
1. Connect the aerial cables 1and 2as
shown.
2. Connect the eurocable 3as shown.
3. Make your selection of the source to which
the VCR has been connected in the Installation
menu, Select your connections, p. 29.
With the aerial cable only
1. Connect the aerial cables 1and 2as
shown.
2. Tune in your recorder’s testsignal and store the
testsignal under programme number 0.
See Analogue: manual  installation, p. 26.
See also the handbook of your recorder....

EN
44
ANTENNA EXT2 EXT1
ANTENNA75oEXT2 EXT1
RECORDER
CABLE
12
RECORDER
3
5
EXT 1/24
Connect two VCRs or VCR and DVD recorder
With eurocables
1. Connect the aerial cables 1and 2as
shown.
2. Connect your VCRs or DVD-recorder to
EXT1and 2with the eurocables 4and 5.
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 29, and link it to 
EXT1or 2.
With aerial cables only
1. Connect the aerial cables 1,2and 3 as
shown.
2. Tune in your recorder’s testsignal and store...

EN
45
Connect a DVD player, Cable box or game console
Note: in case of any problems, see Annex 5:
Issues referring to connected peripherals with a
HDMI connector, p. 60.
With a HDMI connector
HDMI is the leading new standard for Digital video
and audio interconnection.
1. Connect your equipment with the 
HDMI
connector.
2. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 29, and link it to 
HDMI 1or 2.
Tip: if necessary, you can adjust the picture position to...

EN
46
Pr Pb Y
DIGITAL
AUDIO AUDIO
HDTV & Progressive 
DISPLAY SYNCHRONIZED
480p, 576p, 720p, 1080i
IN
IN LR
EXT3
AUDIO OUTAUDIO
OUTL RDIGITAL
AUDIO
OUT
1
EXT3 :
YPbPr EXT3 :
AUDIO IN
R / L
3
DVD / STB
2
DIGITAL
AUDIO
IN
Connect a DVD player, a satellite receiver or Cable box 
With Component Video Connectors
1. Connect the three separate component video
cables 1to the YPbPr jacks on the DVD
player and to the Y,Pband Prjacks of 
EXT3
on the TV.
2. Connect the audio cable 2to the digital out
of the...

EN
47
Notes:
- only a PC with digital sound can be connected to the HDMIconnection;
- if your PC does not have digital sound output, connect your PC via a VGA connector;
- before connecting your PC to the TV, select your PC monitor settings to a refresh frequency of 
60 Hz;
- supported PC monitor modes:
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
Connect a PC
Pr Pb Y
DIGITAL
AUDIO AUDIO
HDTV & Progressive 
DISPLAY SYNCHRONIZED
480p, 576p, 720p, 1080i
IN
IN LR
EXT3
AUDIO OUTAUDIO
OUTL RDIGITAL
AUDIO
OUT...

EN
48
Pr Pb Y
DIGITAL
AUDIO AUDIO
HDTV & Progressive 
DISPLAY SYNCHRONIZED
480p, 576p, 720p, 1080i
IN
IN L R
EXT3
AUDIO OUTAUDIO
OUTL RDIGITAL
AUDIO
OUT
AUDIO OUT
DIGITAL
AUDIO
OUT
DIGITALAUDIOOUT
1
Connect a Home Cinema amplifier
Digital Home Cinema amplifier

EN
49
Use the Common Interface slot
To receive scrambled DTV signals you will need a
CA (Conditional Access) module and a Smart card
provided by the service provider.
A CA module can enable additional services, for
example Pay TV.
Contact your Common Interface service provider
to get more information about these modules.
Although CA module types may vary dependent
on the manufacturer, each one of the CA modules
supports a certain kind of encryption system. Your
TV supports CA modules to work with the...

EN
50
Select connected equipment
Before operating your connected equipment you have to make
a selection in the Installation, Select your connections menu,
p. 29.
1. Press the 
MENU/BROWSEkey.
2. Select TV menuand press the cursor right.
3. Select Installation.
4. Press the cursor right.
5. Select Connections.
6. Press the cursor right.
7. Select the input to which the peripheral equipment is
connected.
8. Press the cursor right again to enter the list of types of
peripherals connected to the selected...