Philips 32pf9631d User Manual

EN
21
Set code/Change code
This allows you to set or change the personal 4-digit access
code that is used in the different lock functions of the TV.
If no PIN-code exists yet, the menu item is set to Set
code. Follow the instructions on screen.
>If a PIN-code has previously been entered, the menu
item is set to Change code. Follow the instructions on
screen.
The Features menu reappears with a message confirming
that your PIN-code has been created or changed.
On timer
From standby, this automatically...

EN
22
Common interface
This allows you to access common interface applications
defined by the service provider of the Common Interface
(CI) module.
The Common Interface (CI) module can contain one or
more applications, which are used to communicate with the
CI service provider and provide some additional facilities to
the user.
See Use the Common Interface slot, p. 49.
Demo
This allows you to get an idea of the features that are part
of the television.
1. Select Demo.
2. Press the cursor right.
3. Select...

EN
23
How to search for and store TV channels
23 This menu allows you to select your preferred language for
menu, audio and subtitle.
Menu language
This allows you to select your menu language out of the list
of the available languages.
Preferred audio language (only with Digital TV broadcasting)
This allows you to select your audio language preference in
case several languages are broadcasted.
Preferred subtitle language (only with Digital TV broadcasting)
This allows you to select your subtitle...

EN
24
How to search for and store TV channels  (Continued)
24After language and country are set correctly, you can now
search for and store the TV channels.
All available digital and analogue TV and digital radio
channels are searched for and stored automatically.
This will take a few minutes.
>When the search is complete, the menu will indicate the
number of digital and analogue channels found.
Select your country
Select the time zone (only with digital TV broadcasting)
Notes:
- if you select a wrong...

EN
25
How to search for and store TV channels  (Continued)
25
Digital: test reception (only with digital TV broadcasting)
This allows you to see the quality and the strength of the
signal reception for a digital frequency. This enables you to
find the antenna position that gives the best reception.
You obtain an indication of the actual channel frequency,
the network name, the signal quality and strength.
>If the signal quality and strength is poor, you can try
repositioning the aerial.
Installation...

EN
26
Analogue: manual installation
This gives you the possibility to manually install (tuning-in
channel by channel) analogue channels. Manual installation
will not find nor store any DVB-T (digital) channels.
1. Select Analogue: manual installationand press the
cursor right.
2. Select System.
3. Select your country or part of the world where you are
now located.
4. Select Searchand press the cursor right.
5. Select the red or green colour key to proceed.
6. Press the cursor left to store the channel...

EN
27 This allows you to rename, to reshuffle and to uninstall or
reinstall the stored channels.
The uninstalled channel is indicated in the list by an icon
in front of the uninstalled channel.
3. Press the green colour key again to reinstall the uninstalled
channel.
Rearrange the channel number list
27
Notes:
- press the yellow colour key to delete all characters. The
cursor is positioned at the beginning again;
- press the blue colour key to delete the character the
cursor is positioned. Enter a new...

This menu contains items that can set or adjust various special
TV functions and that will typically be accessed only
occasionally.
Select your location
This allows you to select the location of your TV.
If you choose for Shopit will result in fixed settings of
picture and sound.
The location Homewill give full flexibility to change any
predefined settings for picture and sound.
Select Teletext  2.5
Some broadcasters offer the opportunity to see more
colours, other background colours and nicer pictures...

EN
29 This allows you to select the peripheral equipment you have
connected to the audio and video connectors.
1. Select Connections.
2. Press the cursor right.
3. Select the input to which the peripheral equipment is
connected.
>When you select 
EXT1,EXT2,EXT3,HDMI 1,
HDMI 2,VG A,Side,Analogue Audio  Inor Digital
Audio In, a list appears which allows you to identify
which type of peripheral equipment is attached to this
input.
4. Press the cursor right again to enter the list of types of
peripherals...

EN
30 30
This allows you to upgrade your TV software using a USB
device.
USB device upgrade
It is possible to initiate an upgrade procedure from a USB
device before you start up the TV. The memory device must
be filled with the appropriate upgrade image (and structure)
which can be found on the www. philips.com/software
website.
How to upload a new software version on your memory
device, see Annex 2, Philips TV software upgrade with
portable memory, p. 54.
Automatic software announcement (if present)...