Philips 32pf9631d User Manual

Safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . 2
Getting started  . . . . . . . . . . . . . . . . . . . . . . . . . 3
Use of the remote control RC4404/01  . . . . . . 5
Use of the option key  . . . . . . . . . . . . . . . . . . . 7 
Keys at the left side of the TV  . . . . . . . . . . . . . 7
Introduction: Digital TV  . . . . . . . . . . . . . . . . . . 8
Switch the TV on  . . . . . . . . . . . . . . . . . . . . . . . 8
First time installation  . . . . . . . . . . . . . . . . . . . ....

2
ENSafety warnings
Do not insert the power plug in a wall socket
or hang the TV to the wall before all
connections are made.
• Place or hang the TV wherever you want, butmake sure that air can circulate freely through the
ventilation slots.
• Do not install the TV in a confined space such as a book case or a similar unit.
• To prevent any unsafe situations, no naked flame
sources, such as lighted candles, should be placed
in the vicinity.
• Avoid heat, direct sunlight and exposure to rain or water.
•...

Before you switch on your TV, connect all your peripheral equipment. See To make video and audio
connections, p. 40.
There is a wide range of audio and video equipment that can be connected to your TV. See To make
audio and video connections, p. 40.
EXT1can handle CVBS, RGB and Audio L/R;
EXT2can handle CVBS, S-VIDEO, RGB, Audio L/R;
EXT3can handle YPbPr and Audio L/R;
HDMI 1and 2.
VG Acan handle VGA, SVGA and 480p, 576p, 1080i, Audio L/R.
Supported video formats: 480i, 480p, 576i, 576p, 720p, 1080i....

BStandby
Press to switch the TV from or to standby mode.
When switched to standby, a red indicator on the TV lights up.
TVPress to select TV mode.
DVD  STB  VCR  AUX
Press to select one of the system modes in which the
remote control can be used.
See Audio and Video equipment keys, p. 51.
DEMOPress to switch the Demo menu on or off.
Colour keys
- When functions are attached to the colour keys, the
colour keys are shown on screen.
- To select a page in Teletext mode.
OPTION
- To open and close the Quick...

Use of the remote control RC4404/01 (continued)EN
6
+P-Channel selection
- to browse through the TV channels and sources stored
and marked in the Favourite channels lists;
- to select a page in Teletext mode;
- to quickly browse through the lists in the menus;
- to switch the TV on from standby mode.
0/9 Digit keys 
To select a TV channel between 0 and 999.
AVSelect your peripherals
See Installation menu, Select your connections, p. 29.
0Previous channel
Press to alternate between the currently viewed...

EN
7 The 
OPTIONkey allows you to display the Quick access menu
which will give you direct access to some features and menu
options.
1. Press the 
OPTIONkey.
>The Quick access menu appears.
2. Press the cursor up/down to select a menu item.
3. Press the 
OKkey to jump to the selected menu item in the
TV menu. (Except for the Clock option).
4. Use the cursor keys to make a selection.
5. Press the 
OPTIONkey to exit.
Use of the OPTION key 
Digital audio language:
See Adjust sound menu settings, p. 17....

EN
8
Introduction: Digital TV
8
Note: if the TV has already been installed before and/or you
want to change the First time installation settings, proceed
with Use of the TV menu settings, p. 13. Next to analogue broadcast reception, your TV has a built-in TV
tuner which receives, decodes and displays digital terrestrial
signals.
Digital TV and radio channels are only available and reproduced:
- when Digital Video Broadcasting Terrestrial (DVB-T) is
applicable in your local area;
- and if DVB-T signal is...

EN
9 After the Welcome screen you are asked to select a language of
the TVs on-screen menus. The text of the header and the info
on screen continuously change language. Also the digital audio
and subtitle language will be set to the selected menu language.
1. Press the cursor up/down to highlight your language.
2. Press the 
OKkey on the remote control.
3. Follow the instructions on screen to proceed.
9
First time installation  (Continued)
a
Step 1: select your on-screen language
3. Press the green...

EN
10By means of several split screens/full screens you are
prompted to select your preferred Picture and Sound
settings, to finally arrive at a complete setting which satisfies
you.
1. Press the green colour key on your remote control to enter
the Settings assistantmenu.
2. Select your Location with the cursor up/down.
>If you choose Shopit will skip the Settings assistant.
The TV parameters for Picture and Sound will then be
set to predefined fixed settings.
Press the green colour key again to...