Philips 273e3sb User Manual

							49
Q8:  Can I change the color setting of my  
   monitor?
Ans.:	 Yes,	you	can	change	your	color	setting		
    through OSD control as the following  
   procedures,
 • Press "OK" to show the OSD (On Screen  
   Display) menu
 • Press	"Down	 Arrow"	to	select	the	option		
   "Color" then press "OK" to enter color  
   setting, there are three settings as below.
   1.   Color Temperature; The six settings  
        are 5000K, 6500K, 7500K, 8200K, 9300K   
       and 11500K. With settings in the 5000K  
	 	 	 	 range	the	panel	appears	 ‘warm,'	with	a	
       red-white color tone, while a 11500K  
	 	 	 	 temperature	yields	 ‘cool,	blue-white		
        toning." 
   2.   sRGB; this is a standard setting for  
        ensuring correct exchange of colors  
       between different device (e.g. digital  
       cameras, monitors, printers, scanners,  
       etc) 
   3.   User Define; the user can choose 
        his/her preference color setting by  
       adjusting red, green blue color.
 Note:
	 A	measurement	of	the	color	of	light		
 radiated by an object while it is being heated.  
 This measurement is expressed in terms of  
 absolute scale, (degrees Kelvin). Lower Kevin  
 temperatures such as 2004K are red; higher  
 temperatures such as 9300K are blue.  
 Neutral temperature is white, at 6504K.
Q9:   Can I connect my LCD monitor to any PC,   
   workstation or Mac?
Ans.:	 Yes.	All	Philips	LCD	monitors	are	fully	
	 	 compatible	with	standard	PCs, 	Macs	and		
	 	 workstations.	You	may	need	a	cable	adapter		
	 	 to	connect	the	monitor	to	your	Mac	
    system. Please contact your Philips sales  
   representative for more information. 
Q10:  Are Philips LCD monitors 
   Plug-and- Play?
Ans.:	 Yes,	the	monitors	are	Plug-and-Play		
    compatible with Windows 7/Vista/XP/NT,  
	 	 Mac	OSX, 	Linux	
Q11:  What is Image Sticking, or Image   
   Burn-in, or After Image, or Ghost Image in  
   LCD panels? 
Ans.: Uninterrupted display of still or static images   
   over an extended period may cause 
   "burn in", also known as "after-imaging" or  
   "ghost imaging", on your screen. "Burn-in", 
   "after-imaging", or "ghost imaging" is a 
   well-known phenomenon in LCD panel 
   technology. In most cases, the "burned in" or 
   "atter-imaging" or "ghost imaging" will 
   disappear gradually over a period of time 
   after the power has been switched off.
	 	 Always	activate	a	moving	screen	saver	
   program when you leave your monitor  
   unattended.
	 	 Always	activate	a	periodic	screen	refresh		
   application if your LCD monitor will display  
   unchanging static content.
 Warning
 Severe"burn-in" or "after-image" or
 "ghost image" symptoms will not disappear  
 and cannot be repaired. The damage  
 mentioned above is not covered under your  
 warranty.
Q12:   Why is my Display not showing sharp text, 
   and is displaying jagged characters?
Ans.:	 Your	LCD	monitor	works	best	at	its	native		
	 	 resolution	of	1920	x	1080	@60Hz. 	For	best		
   display please use this resolution.

7. Troubleshooting & FAQs  
						

							50
2011 © Koninklijke Philips Electronics N.V. All rights reser ved.
Philips and the Philips Shield Em blem are registered t radema rks of 
Koninklijke Philips Electronics N. V. and are used under license from 
Koninklijke Philips Elec tr onics N.V .
Specif ications are subject to change without notic e.
V er sion:  M3273EE1T