Philips 273e3sb User Manual
Have a look at the manual Philips 273e3sb User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
19
Note
A red or blue bright dot must be more than 50
percent brighter than neighboring dots while
a green bright dot is 30 percent brighter than
neighboring dots.
Black Dot Defects
Black dot defects appear as pixels or sub pixels
that are always dark or 'off'. That is, a dark dot is
a sub-pixel that stands out on the screen when
the monitor displays a light pattern. These are the
types of black dot defects:
Proximity of Pixel Defects
Because pixel and sub pixels defects of the same
type that are near to one another may be more
noticeable, Philips also specifies tolerances for the
proximity of pixel defects.
Pixel Defect Tolerances
In order to qualify for repair or replacement due
to pixel defects during the warranty period, a TFT
LCD panel in a Philips flat panel monitor must
have pixel or sub pixel defects exceeding the
tolerances listed in the following tables.
BRIGHT DOT DEFECTSACCEPTABLE LEVEL
1 lit subpixel3
2 adjacent lit subpixels1
3 adjacent lit subpixels (one white pixel)0
Distance between two bright dot defects*>15mm
Total bright dot defects of all types3
BLACK DOT DEFECTSACCEPTABLE LEVEL
1 dark subpixel5 or fewer
2 adjacent dark subpixels2 or fewer
3 adjacent dark subpixels0
Distance between two black dot defects*>15mm
Total black dot defects of all types5 or fewer
TOTAL DOT DEFECTSACCEPTABLE LEVEL
Total bright or black dot defects of all types5 or fewer
Note
1. or 2 adjacent sub pixel defects = 1 dot defect
2. This monitor is ISO 9241-307 compliant.( ISO9241-307 : Ergonomic requirement, analysis and
compliance test methods for electronic visual displays)
3. Product information
20
4. Technical Specifications
273E3
Picture/Display
LCD panel type TFT-LCD
Backlight CCFL 273E3
Panel size 27" ( 68.6 cm)
Aspect ratio 16:9
Pixel Pitch 0.31 x 0.31 mm
Brightness 395 cd/m²
Smar tContrast 500,000:1
Contrast ratio (typ.) 1000:1
Response time (typical) 5 ms
Optimum Resolution 1920x1080 @ 60Hz
Viewing angle 170° (H) / 160° (V)@C/R>10
Picture Enhancement Smar tImage Lite
Display colors 16.7 M
Ver tical refresh rate 56Hz -76Hz
Horizontal Frequency 30kHz - 83kHz
sRGB YES
Connectivity
Signal input DVI-D (digital), VGA (Analog)
Input Signal Separate Sync, Sync on Green
Convenience
User Convenience
OSD Languages English, French, German, Italian, Russian, Spanish,
Simplified Chinese, Por tuguese, Turkish
Other convenience Kensington lock
Plug & Play Compatibility DDC/CI, sRGB, Windows 7, Mac OSX, Linux
Stand
Tilt -5/+20
4. Technical SpeciÖcations
21 Power On mode 43.5W (typical) Energy Consumption (EnergyStar 5.0 test method) AC Input Voltage at 100VAC +/-5VAC, 50Hz +/- 3Hz AC Input Voltage at 115VAC +/-5VAC, 60Hz +/- 3Hz AC Input Voltage at 230VAC +/-5VAC, 50Hz +/ -3Hz Normal Operation (typcial) 25.15W 25.10W 25.10W Sleep 0.5W 0.5W 0.5W Off 0.5W 0.5W 0.5W Heat Dissipation* AC Input Voltage at 100VAC +/-5VAC, 50Hz +/ -3Hz AC Input Voltage at 115VAC +/-5VAC, 60Hz +/ -3Hz AC Input Voltage at 230VAC +/-5VAC, 50Hz +/ -3Hz Normal Operation 82.13BTU/hr 82.09BTU/hr 82.06BTU/hr Sleep 2.09BTU/hr 2.09BTU/hr 2.09BTU/hr Off 2.09BTU/hr 2.09BTU/hr 2.09BTU/hr 4. Technical SpeciÖcations
22 Dimension Product with stand (WxHxD) 642x440x227mm Product without stand (WxHxD) 642x391x64mm Box dimension (WxHxD) 700x138x525mm Weight Product with stand 8.2kg Product without stand 6.5kg Product with packaging 8.82kg Operating Condition Temperature range (operation) 0°C to 40 °C Temperature range (Non-operation) -20°C to 60°C Relative humidity 20% to 80% Altitude operation: + 12,000 ft ( 3,658 m) Non-operation: + 40,000 ft ( 12,192 m) MTBF 50,000hrs Environmental ROHS YES EPEAT Silver. (www.epeat.net) Packaging 100% recyclable Compliance and standards Regulator y Approvals CE Mark, FCC Class B, SEMKO, TÜV/ GS, TÜV Ergo, UL/cUL, Energy star 5.0, TCO 5.0 Cabinet Color Black/Black Finish Texture/Texture Note 1. EPEAT Gold or Silver is valid only where Philips registers the product Please visit www. epeat.net for registration status in your countr y. 2. This data is subject to change without notice. Go to www.philips.com/suppor t to download the latest version of leaflet. 4. Technical SpeciÖcations
23 4.1 Resolution & Preset Modes4.2 Automatic PowerSaving If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: Maximum Resolution For 273E3 1920 x 1080 at 60 Hz (analog input) 1920 x 1080 at 60 Hz (digital input) Recommended Resolution For 273E3 1920 x 1080 at 60 Hz (digital input) H. freq (kHz)ResolutionV. freq (Hz) 31.47 720x40070.09 31.47 640x48059.94 35.00 640x48066.67 37.86 640x48072.81 37.50 640x48075.00 37.88 800x60060.32 46.88 800x60075.00 48.36 1024x76860.00 60.02 1024x76875.03 63.89 1280x102460.02 79.98 1280x102475.03 55.94 1440x90059.89 70.64 1440x90074.98 65.29 1680x105059.95 67.50 1920x108060.00 Power Management DefinitionVESA Mode Video H-sync V-sync Power UsedLED color Active ON YesYes
24 5. Regulatory Information Lead-free Product Lead free display promotes environmentally sound recover y and disposal of waste from electrical and electronic equipment. Toxic substances like Lead has been eliminated and compliance with European community’s stringent RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle. TCO Displays 5.0 Information Congratulations, Your display is designed for both you and the planet! This display carries the TCO Cer tified label. This ensures that the display is designed for minimal impact on the climate and natural environment, while offering all the performance expected from top of the line electronic products. TCO Cer tified is a third par ty verified program, where ever y product model is tested by an accredited independent test laborator y. TCO Cer tified represents one of the toughest cer tifications for displays worldwide. Some of the Usability features of the TCO Displays 5.0 requirements: Visual Ergonomics Good visual ergonomics in order to improve the working environment for the user and to reduce sight and strain problems. Impor tant parameters are: • Light levels without color tint, Uniform color and luminance, Wide color gamut • Calibrated color temperature and gamma cur ve • Wide luminance level, Dark black levels, Low motion blur Electrical Safety • Product fulfills rigorous safety standards Emissions • Low alternating electric and magnetic fields emissions • Low acoustic noise emissions • Some of the Environmental features of the TCO Displays 5.0 requirements: • The brand owner demonstrates corporate social responsibility and has a cer tified environmental management system (EMAS or ISO 14001) • Ver y low energy consumption both in on- and standby mode • Restrictions on chlorinated and brominated flame retardants, plasticizer and polymers • Restrictions on heavy metals such as cadmium, mercur y and lead (RoHS compliance) 5. Regulatory Infomation
25 • 2005/32/EC (EuP Directive, EC No. 1275/2008 mplementing Directive for Standby and Off mode power consumption) and is produced by a manufacturing organization on ISO9000 level. • The product also comply with the following standards • ISO9241-307:2008 (Ergonomic requirement, Analysis and compliance test methods for electronic visual displays) • GS EK1-2000:2009 (GS mark requirement) • prEN50279:1998 (Low Frequency Electric and Magnetic fields for Visual Display) • MPR-II (MPR:1990:8/1990:10 Low Frequency Electric and Magnetic fields) • TCO Displays 5.0 (Requirement for Environment Labeling of Ergonomics, Energy, Ecology and Emission, TCO: Swedish Confederation of Professional Employees) for TCO versions Energy Star Declaration (www.energystar.gov) This monitor is equipped with a function for saving energy which suppor ts the VESA Display Power Management (DPM) standard. This means that the monitor must be connected to a computer which suppor ts VESA DPM. Time settings are adjusted from the system unit by software. VESA StateLED IndicatorPower Consumption Normal operationON (Active)White< 25.4 W (typ.) Power Saving Alternative 2 One step SleepSwitch OffWhite(blink) OFF< 0.5 W < 0.5 W “The EPEAT (Electronic Product Environmental Assessment Tool) program evaluates computer desktops, laptops, and monitors based on 51 environmental criteria developed through an extensive stakeholder consensus process suppor ted by US EPA. EPEAT system helps purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes. EPEAT also provides a clear and consistent set of performance criteria for the design of products, and provides an oppor tunity for manufacturers to secure market recognition for effor ts to reduce the environmental impact of its products.” Benefits of EPEAT Reduce use of primar y materials Reduce use of toxic materials Avoid the disposal of hazardous waste EPEAT’S requirement that all registered products meet ENERGY STAR’s energy efficiency specifications, means that these products will consume less energy throughout their life. CE Declaration of Conformity This product is in conformity with the following standards • EN60950-1:2006 (Safety requirement of Information Technology Equipment) • EN55022:2006 (Radio Disturbance requirement of Information Technology Equipment) • EN55024:1998+A1:2001+A2:2003 (Immunity requirement of Information Technology Equipment) • EN61000-3-2:2006 (Limits for Harmonic Current Emission) • EN61000-3-3:1995+A1:2001+A2:2005 (Limitation of Voltage Fluctuation and Flicker) following provisions of directives applicable • 2006/95/EC (Low Voltage Directive) • 2004/108/EC (EMC Directive) EPEAT (www.epeat.net) As an ENERGY STAR® Par tner, we have determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Note We recommend you switch off the monitor when it is not in use for a long time. 5. Regulatory Infomation
26 Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Par t 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a par ticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to tr y to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications not expressly approved by the par ty responsible for compliance could void the user's authority to operate the equipment. Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture. THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS. FCC Declaration of Conformity Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Par t 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 5. Regulatory Infomation
27 Commission Federale de la Communication (FCC Declaration) Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'ar ticle 15 Des règles de la FCC . Ces limites sont conçues de façon à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une installation résidentielle. CET appareil produit, utilise et peut émettre des hyperfréquences qui, si l'appareil n'est pas installé et utilisé selon les consignes données, peuvent causer des interférences nuisibles aux communications radio. Cependant, rien ne peut garantir l'absence d'interférences dans le cadre d'une installation par ticulière. Si cet appareil est la cause d'interférences nuisibles pour la réception des signaux de radio ou de télévision, ce qui peut être décelé en fermant l'équipement, puis en le remettant en fonction, l'utilisateur pourrait essayer de corriger la situation en prenant les mesures suivantes: • Réorienter ou déplacer l'antenne de réception. • Augmenter la distance entre l'équipement et le récepteur. • Brancher l'équipement sur un autre circuit que celui utilisé par le récepteur. • Demander l'aide du marchand ou d'un technicien chevronné en radio/télévision. Toutes modifications n'ayant pas reçu l'approbation des ser vices compétents en matière de conformité est susceptible d'interdire à l'utilisateur l'usage du présent équipement. N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques. CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA. EN 55022 Compliance (Czech Republic Only) 5. Regulatory Infomation
28 Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three- prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source. The phasing conductor of the room's electrical installation should have a reser ve shor t-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A). To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible. A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107 and PN-89/E-06251. North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: S Ø R G V E D P L A C E R I N G E N F O R , A T NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankier to VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO V O I D A A N TA R V I T TA E S S A H E L P O S T I IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: N Å R D E T T E U T S T Y R E T P L A S S E R E S , M Å D U PA S S E P Å AT K O N TA K T E N E F O R STØMTILFØRSEL ER LETTE Å NÅ. BSMI Notice (Taiwan Only) 5. Regulatory Infomation